Zestawienie wykładów (invited lectures) na zaproszenie Organizatorów zagranicznych Konferencji naukowych:
• BIT’s 2nd Annual World Congress of Smart Materials-2016, 4-6.03.2016, Singapore:
- Smart photovoltaics based on dye-sensitized solar cells with carbon nanotubes and graphene
• The Advances in Materials and Processing Technologies Conference, AMPT 2015, 13-17.12.2015, Madrid, Spain:
- Effect of carbon nanotubes content on microstructure and properties of AA6061 matrix composites (keynote lecture)
- Effect of strain deformation rates on forming the structure and mechanical properties of high-manganese austenitic TWIP steels
• 22nd Winter International Scientific Conference on "Achievements in Mechanical and Materials Engineering", Winter-AMME’2015,
6-9.12.2015, Zakopane:
- Electron microscopy as a synergic tool of the nanotechnology development (special opening lecture)
• BIT’s 6th Annual World Gene Convention-2015, “More Advanced, More Healthy and More Safety”, WGC-2015, 13-15.11.2015, Qingdao, China:
- Porous titanium scaffolds for cell grooving in dental application produced by additive manufacturing methods
• World Congress on Microscopy: Instrumentation, Techniques and Applications in Life Sciences and Materials Sciences, WCM 2015,
8-13.10. 2015, Kottayam, Kerala, India:
- Advanced electron microscopy methods aiding the development of surface engineering of materials (keynote opening lecture)
- Application microscopy’s methods for investigations of the modern engineering materials with structural nanoelements
• XXIV International Materials Research Congress, IMRC 2015, 16-20.08.2015, Cancun, Mexico:
- Additive manufacturing of metallic scaffolds for orthopedic application
- Biodegradable and antimicrobial polycaprolactone nanofibers with and without silver precipitates
• International Conference On Frontiers In Materials Processing, Applications, Research, & Technology, FiMPART’2015, 12-15.06.2015, Hyderabad, India:
- TWIP mechanism in processing of high-manganese austenitic steels
• International Symposium of the Ukrainian Mechanical Engineers in Lviv, ISUMEL-12, 28-29.05.2015, Lviv, Ukraine:
- Development of surface engineering of materials with the explanation using modern methods of electron microscopy
• International Conference on Innovative Manufacturing Technology IMT 2014, 3-5.12.2014, Zakopane:
- Scale minimization as a symptom of development in the surface engineering research
• 15th International Materials Symposium, IMSP'2014, 15-17.10.2014, Denizli, Turkey:
- The development of surface engineering through the use of advanced electron microscopy methods
• 8th International Conference on Processing & Manufacturing of Advanced Materials THERMEC’2013, 2-6.12.2013, Las Vegas, USA:
- Mechanical properties of high-manganese austenitic TWIP-type steel
• 22nd International Congress of Mechanical Engineering, COBEM’2013, 3-7.11.2013, Ribeirão Preto, Brazil (keynote lecture):
- Engineering characteristics of the high-manganese austenitic steels for automotive application
• 7th Brazilian Congress on Manufacturing Engineering, COBEF 2013, 20-24.05.2013, Penedo, Itatiaia, RJ, Brazil:
- Characterization and properties of PVD coatings applied to extrusion dies
• International Scientific and Technical Conference on of Polymer Materials, DIAGNOSTICS 2011, 9-18.12.2011, Val Di Sole, Italy:
- Modern composite and metallic materials and new research methodologies
• 21st International Congress of Mechanical Engineering, COBEM 2011, 24-28.10.2011, Natal, Brazil:
- TWIP & TRIP mechanisms importance for the fracture counteraction in high-manganese austenitic steels
• International Scientific and Technical Conference «IV Ukrainian-Polish Scientific Dialogue» 11-14.10.2011, Jaremche, Ukraine:
- The outstanding achievements in the scientific activity of the Institute of Engineering Materials and Biomaterials of the Silesian University of Technology in Gliwice, Poland
• 8th International Conference on Industrial Tools and Material Processing Technologies, ICIT&MPT, 2-5.10.2011, Ljubljana, Slovenia:
- Effect of laser surface alloying on structure of a commercial tool steel
• 14th International Conference on Advances in Materials & Processing Technologies, AMPT 2011, 13-16.07.2011, Istambul, Turkey:
- Influence of hot-working conditions on a structure of new-developed high-manganese C-Mn-Si-Al-Nb austenitic steels
• 6th COBEF – Brazilian Conference on Manufacturing Engineering, 11-15.04.2011, Caxias do Sul, Brazil (lecture inaugurating conference invited by organisers):
- Gradient PVD and CVD coatings on the cutting sintered tools
• 16h International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S'2010, 22-25.11.2010, Gliwice – Ustroń:
- 65 years of traditions of materials science and engineering in Silesia
• 65th Anniversary of University of Ruse, 11-13.11.2010, Ruse, Bulgaria:
- The scientific activity of the Institute of Engineering Materials and Biomaterials of the Silesian University of Technology in Gliwice, Poland
• 13th International Materials Symposium, 12-15.10.2010, Denizli, Turkey:
- Comparison of the PVD coatings deposited onto plasma nitrited hot work tool steel
• International Conference on Science and Education, 12-22.02.2010, Colombo, Sri Lanka:
- Hot-working of advanced high-manganese C-Mn-Si-Al steel
• 4th Symposium on Vacuum based Science and Technology, 21-23.09.2009, Koszalin – Kołobrzeg:
- Gradient PVD and CVD coatings on the cutting sintered tools
• Materiały Inżynierskie w Podwyższeniu Efektywności Technologii Produkcyjnych, 12-13.09. 2009, Khmelnytsky, Ukraine (lecture inaugurating conference invited by organisers):
- Współczesne zadania inżynierii materiałowej i inżynierii powierzchni
• International Conference of IFHTSE 2009 “New Challenges in Heat Treatment and Surface Engineering Conference, 9-11.06.2009, Dubrownik – Cavtat, Croatia:
- Laser Surface Treatment of Mg-Al-Zn Alloys
• 18th Brazilian Congress of Materials Science and Engineering, CBECIMAT’2008, 24-28.11. 2008, Brasilia, Brazil (keynote lecture):
- Laser surface treatment of the light metals alloy and tool steels
• 9th Global Congress on Manufacturing and Management, GCMM’2008, 12-14.11.2008, Brisbane, Australia (keynote lecture):
- Mg light and tool gradient materials produced using laser or PVD surface treatment
• Advances in Materials and Processing Technologies, AMPT’2008, 2-5.11.2008, Manama, Bahrain, (lecture inaugurating conference invited by organisers):
- Laser treated surface layers and PVD gradient coatings on Mg light alloys and tool sintered materials
• Twelfth International Materials Symposium, IMSP’2008, 15-17.10.2008, Denizli, Turkey:
- Microstructure and selected properties of heat treated composite materials reinforced with TiAl particles
• II International Conference on Modern Achievements of Science and Education, 25.09-2.10. 2008, Netanya, Israel:
- Laser surface treatment of magnesium alloy with side injection of titanium carbide
• XIX International Congress of Mechanical Engineering COBEM’2007, 4-11.11.2007, Brasilia, Brazil (keynote lecture):
- Effect of aluminium on structure and properties of casting Mg-Al-Zn alloys
• 8th Global Congress on Manufacturing and Management, 27.10-3.11.2007, Brisbane – Gold Coast, Australia:
- Structure and properties of WC/HS6-5-2 graded tool materials
• 10th International Conference on Advances in Materials and Processing Technologies, AMPT 2007, 7-11.10.2007, Daejeon, South Korea:
- Laser surface treatment of multicrystalline silicon for enhancing optical properties
• 11th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology", TMT 2007, 5-9.09.2007, Hammamet, Tunisia, (keynote lecture):
- Multilayer and gradient on PVD coatings on sintered tool materials
• International Conference on Surfaces, Coatings and Nanostructured Materials, nanoSMat’2007, 9-11.07.2007, Algarve, Portugal:
- Comparison of the structure and antiwear properties of PVD coatings deposited onto heat treated and plasma nitrited hot work tool steel
• 8th International Symposium of Ukrainian Mechanical Engineers, 23-25.05.2007, Lviv, Ukraine:
- Structure and properties of nanocrystalline composite materials
• 12. Internationalen Metallographie-Tagung, Fortschritte in der Metallographie, 27-29.09.2006, Leoben, Austria:
- Comparison of structure and properties of the structure layer of the 32CrMoV12-20 and X40CrMoV5-1 steel alloyed with high power diode laser
• 15th Congress of International Federation for Heat Treatment and Surface Engineering, 25-27.09.2006, Vienna, Austria:
- Comparison of the influence of surface laser alloying of the 2CrMoV2-2 tool steel using NbC and TaC powder
• 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, 30.07-3.08.2006, Las Vegas, USA:
- FEM application for modeling of PVD coatings properties
• 5th International Conference on Processing & Manufacturing of Advanced Materials – Processing, Fabrication, Properties, Application, THERMEC’2006, 4-8.07.2006, Vancouver, Canada (keynote lecture):
- Gradient, multicomponent and multilayers coating deposited on sintered tool materials
• 5th International Surface Engineering Congress ISEC’2006, 15-18.05.2006, Seattle, USA (keynote lecture):
- Wear resistant PVD coatings on advanced ceramics
• Polsko-Ukraińska Konferencja Naukowo-Techniczna – Mechanika i Informatyka, 26-29.04. 2006, Khmelnytsky, Ukraine:
- Modyfikacja powierzchni krzemowych ogniw słonecznych
• 2nd Pacific International Conference on Application of Laser and Optics, PICALO’2006, 31.03-9.04.2006, Melbourne, Australia:
- Comparison of the structures of the hot-work tool steels laser modified gradient layers
• 18th International Congress of Mechanical Engineering, COBEM’2005, 6-11.11.2005, Ouro Preto, Brazil (keynote lecture):
- Hard, wear resistance coatings deposits on sintered tool materials
• International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, 7-9.09.2005, Aveiro, Portugal:
- Characteristics of nanocrystalline coatings deposited on the cutting tool ceramics
• 9th International Research/Expert Conference on Trends in Development of Machinery and Associated Technology, TMT 2005, 26-30.09.2005, Antalaya, Turkey:
- Structure and properties of gradient and multi (Ti,Al,Si)N+TiN nanocrystalline coatings deposited on cermet and ceramic tool materials
• International Forum on Advances in Materials Processing Technology IFAMPT’2005, 29.08-1.09.2005, Glasgow, Great Britain:
- The structure and functional properties of PVD and CVD coated Al2O3+ZrO2 oxide tool ceramics
• 2nd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, 20-22.06.2005, Riva del Garda, Italy:
- Characterisation of the gradient coatings TiN+(Ti,Al,Si)N+TiN type deposited on sintered tool materials
• 1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, IFHTSE 2005, 8-11.06.2005, Pula, Croatia:
- Improvement of wear resistance of hot work tool steel by plasma nitriding and PVD coatings
• 3rd International Conference on Advanced Materials Processing (ICAMP-3) and the Australasian Ceramic Society Biannual International Conference (Austceram 2004), 29.11-1.12.2004, Melbourne, Australia:
- Development of surface layers alloyed by HPDL laser on hot-work tool steel
• 23rd International Congress on Application of Lasers and Electro-Optics ICALEO’2004, 4-7.10.2004, San Francisco, USA:
- Laser alloyed hot-work tool steel with WC carbides
• 12th International Conference on Experimental Mechanics ICEM12, 29.08-2.09.2004, Bari, Italy:
- Softmagnetic nanocomposite with silicon polymer matrix and powdered Co77Si11,5B11,5
• 54th CIRP General Assembly, 22-28.08.2004, Kraków (lecture inaugurating conference invited by organisers):
- Significance of materials science for advances in products design and manufacturing
• 8th Cairo University Conference on Mechanical Design and Production, MDP-8, 4-8.01.2004, Cairo, Egypt (keynote lecture):
- Significance of materials science for the future development of societies
• XVII International Congress of Mechanical Engineering COBEM’2003, 10-14.11.2003, Sao Paulo, Brazil (keynote lecture):
- Materials design as an important element of advanced products’ engineering design and manufacturing
• I Ukraińsko-Polska Konferencja Naukowa nt. Współczesne techniki wytwarzania w rozwoju ekonomicznej integracji oraz przedsiębiorczości, 16-18.10.2003, Satanov, Ukraine (lecture inaugurating conference invited by organisers):
- Znaczenie rozwoju nauki o materiałach i inżynierii materiałowej dla poprawy jakości życia współcze-snych społeczeństw
• International Conference on Advanced Materials and Processing Technologies, AMPT 2003, 8 11.07.2003, Dublin, Ireland:
- Application of neural networks for prediction of critical values of temperatures and time of the supercooled austenite transformation
• 6th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology”, 18-22.09.2002, Neum, Bosnia and Herzegovina:
- Structure and properties of the sintered tool materials coated with hard surface layers
• International Conference Advances in Materials and Processing Technologies AMPT’2001, 18-21.09.2001, Leganes, Spain:
- Microstructural development during sintering under nitrogen rich atmosphere of T15 and M2 high speed steels produced by a modified metal injection moulding process
• 8th Seminar of International Federation for Heat Treatment and Surface Engineering IFHTSE’2001, 12-14.09.2001, Dubrownik – Cavtat, Croatia:
- Heat treatment as the fundamental technological process of formation of structure and properties of the metallic engineering materials (lecture inaugurating conference invited by organisers)
• 12th International Conference Design Tools and Methods in Industrial Engineering ADM’2001, 5-7.09.2001, Rimini, Italy:
- Materials’ design as an important element of engineering design of machine and their parts
• 8th Annual International Conference on Composites Engineering ICCE/8, 5-11.08.2001, Tenerife, Spain:
- Structure, erosion resistance and mechanical properties of the PVD coatings on PM HSS steels of the ASP30 type
Zestawienie innych referatów na zagranicznych Konferencjach naukowych – przedstawionych w formie prezentacji lub posteru, * oznacza osobisty udział w konferencji
• *The Advances in Materials and Processing Technologies Conference, AMPT 2015, 13-17.12.2015, Madrid, Spain:
- Computer aided design and selective laser melting of porous biomimetic materials
• BIT’s 6th Annual World Gene Convention-2015, “More Advanced, More Healthy and More Safety”, WGC-2015, 13-15.11.2015, Qingdao, China:
- Electrospinned nanofibers and nanocomposites for regenerative medicine
• *XXIV International Materials Research Congress, IMRC 2015, 16-20.08.2015, Cancun, Mexico:
- Additive manufacturing of metallic scaffolds for orthopedic application
- The aluminium matrix nanocomposites with halloysite and carbon nanotubes
• *22nd International Symposium on Metastable, Amorphous and Nanostructured Materials, ISMANAM 2015, 13-17.07.2015, Paris, France:
- Phase Transformations under Cold Plastic Deformation of High Manganese X11MnSiAl17-1-3 Steel
- Fabrication and Microstructure of Aluminium Matrix Composites Reinforced with MWCNT
• *International Conference On Frontiers In Materials Processing, Applications, Research, & Technology, FiMPART’2015, 12-15.06.2015 Hyderabad, India:
- Structure and properties of the biomimetic composite consisting of the Ti6Al4V sintered scaffolds coated by polymeric surface layer
• 2nd International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC2015, 4-6.02.2015, Bali, Indonesia:
- Effect of milling conditions on microstructure and properties of AA6061/halloysite composites
• *3rd International Conference on Recent Trends in Structural Materials, COMAT 2014, 19-21.11.2014, Pilsen, Czech Republic:
- Mechanical properties and wear resistance of PM composite materials reinforced with the halloysite particles
- Influence of thermo-mechanical treatments on structure and mechanical properties of high-Mn steel
• *8th International Conference on Processing & Manufacturing of Advanced Materials THERMEC’2013, 2-6.12.2013, Las Vegas, USA:
- TEM and XRD study of nanostructured composite materials reinforced with the halloysite particles
• 14th International Scientific Conference Electric Power Engineering, 28-30.05.2013, Kouty nad Desnou, Czech Republic:
- The use of conventional technique to shape the properties of the front side metallization of monocrystalline solar cell and its structure
• 11th Global Congress on Manufacturing and Management, GCMM2012, 28-30.11.2012, Auckland, New Zealand:
- Structure and properties of high manganese TWIP, TRIP & TRIPLEX steels
• BIT's 2nd New Energy Forum, 19-21.10.2012, Guangzhou, China:
- Application of Crystalline Silicon Laser Micro-Treatment for High Efficiency Solar Cells
• *14th International Materials Symposium, IMSP'2012, 10-12.10.2012, Denizli, Turkey:
- Analysis of PVD and CVD Coatings Properties Influence on Durability of the Cutting Edge
- Characterization of Aluminasilicate Nanoparticles as a Reinforcement in Composite Materials Based on Polymeric Matrix
- Heat Treatment Remanium 2000+ Cobalt Alloy Used as Substrate on Dentures
- Mechanically Milled Aluminium Matrix Composites Reinforced with Halloysite Nanotubes
- Metallisation Technology of Silicon Solar Cells Using the Convectional and Laser Technique
- Possibility of Wettability Improvement of Al2O3 Preforms Infiltrated by Liquid Aluminium Alloy by Deposition Ni-P Coating
- Properties of Magnetostrictive Composite Materials With Polyurethane Matrix Reinforced With Terfenol-D Particles
- Reinforcement of Polymer Nanocomposites by Injection Moulding
- Simulation of Powder Injection Moulding Conditions Using Cadmould Program
- Virtual Examinations of Heat Treatment Influence on Structural Steels Mechanical Properties
• 16. Internationales Dresdner Leichtbausymposium. Erfolgsfaktor Systemleichtbau im globalen Wettbewerb - Internationalisierung der Vernetzung von Leichtbau-Kompetenzclustern, 14-15.06.2012, Dresden, Germany:
- Laser surface treatment of cast magnesium alloys
- Laser texturing and microtreatment of silicon for photovoltaics
- Magnetostrictive composities in polyurethane matrix
- A nanostructural aluminium matrix composites reinforced with halloysite nanotubes
• *12th International Scientific an Technical Conference on Engineering Polymers and Composites, COMPOSITES 2012, 7-11.05.2012, Prague, Czech Republic:
- Wpływ nanorurek węglowych na własności wytrzymałościowe nanokompozytów
• *International Scientific and Technical Conference on DIAGNOSTICS 2011, 9-18.12.2011, Val Di Sole, Italy:
- “FORSURF”, Foresight wiodących technologii kształtowania własności powierzchni materiałów inżynierskich i biomedycznych
• *XII. Vedecka Konferencia sa zahranicnou ucast’ou “Degradacia Konstrukcnych Materialov 2011”, 12-14.09.2011, Terchova-Biely Potok, Slovak Republic:
- Definition of magnesium alloy structure by quantity evaluation
- Microstructure and mechanical properties of heat treated AlSi12Cu1Fe cast alloy
• *7th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC’2011, 1-5.08.2011, Quebec, Canada:
- Influence of laser processing on multicrystalline silicon surface
- Hot-rolling of advanced high-manganese C-Mn-Si-Al steels
• The 2011 International Conference on Advanced Engineering Materials and Technology, AEMT 2011, 29-31.07.2011, Sanya, China:
- Effect of laser surface melting on structure and properties of a high speed tool steel
- Surface layer properties of sintered ferritic stainless steel remelted and alloyed with FeNi and Ni by HPDL laser
• *14th International Conference on Advances in Materials & Processing Technologies, AMPT 2011, 13-16.07.2011, Istambul, Turkey:
- Comparison of conventional and unconventional methods for the front side metallization of silicon solar cells
• *13th International Materials Symposium, IMSP’2010, 13-15.10.2010, Denizli, Turkey:
- Abrasive wear resistance of the hot work tool steels remelted or alloyed by HPDL laser
- Laser surface remelting and alloying of sintered stainless steels
• Seventh Pacific Rim International Conference on Advanced Materials and Processing, PRICM-7, 2-6.08. 2010, Cairns, Australia:
- Hot-working behaviour of advanced high-manganese C-Mn-Si-Al steels
- Characterization performance of laser melted commercial tool steels
- The laser surface remelting of austenitic stainless steel
• *International Conference on Science and Education, 12-22.02.2010, Colombo, Sri Lanka:
- Laser surface remelting of wrought and sintered austenitic stainless steel
• Soft Magnetic Materials Conference SMM19, 6-9.09.2009, Turin, Italy:
- Structure and properties of nanocomposite soft magnetic materials
• 6th International Conference on Processing and Manufacturing of Advanced Materials – Processing, Fabrication, Properties, Applications, THERMEC’2009, 25-29.08.2009, Berlin, Germany:
- Phases and structure characteristics of the near eutectic Al-Si-Cu alloy using derivative thermo analysis
- Microstructure evolution of C-Mn-Si-Al-Nb high-manganese steel during the thermomechanical processing
- Comparison of structure and properties of hard coatings on commercial tool materials manufactured with the pressureless forming method or laser treatment
- Optimization of heat treatment conditions of magnesium cast alloys
- Magnetostrictive properties of epoxy-bonded Tb0,3Dy0,7Fe1,9 composites
• 4th International Conference on Powder Metallurgy, RoPM 2009, 8-11.07.2009, Craiova, Cluj-Napoca, Romania:
- Stainless steels sintered form the mixture of prealloyed stainless steel and alloying element powders
• *Advances in Materials and Processing Technologies, AMPT’2008, 2-5.11.2008, Manama, Bahrain:
- Structure and properties of VC/HS6-5-2 gradient tool materials
- Structure and properties of the 32CrMoV12-28 hot work tool steels alloyed with BN and Si3N4 powder using HPDL laser
- Comparison of the PVD gradient coatings deposited onto X40CrMoV5-1, HS6-5-2 tool steels and sialon substrate
- The influence of Ni-P layer deposited onto reinforcement on the properties of Al-Al2O3 composite materials
• *II International Conference on Modern Achievements of Science and Education, 25.09-2.10. 2008, Netanya, Israel:
- Properties of sintered gradient tool WC/HS6-5-2 materials
• International Conference on Electronic Materials, IUMRS-ICEM, 28.07-1.08.2008, Sydney, Australia:
- On the implementation of virtual machines in computer aided education
• 6th International Latin-American Conference on Powder Technology, PTECH’2007, 7-10.11.2007, Búzios, Rio de Janeiro, Brazil:
- Structure and properties of aluminum matrix composites reinforced by Al2O3 particles
- Comparison of structure and properties of the electroplating, hybrid (electroplating + PVD) and PVD coatings deposited onto the brass substrate
- Structure and properties of a gradient tool materials manufactured using the conventional powder metallurgy method
- Influence of heat treatment on the structure, properties and corrosion resistance of PM composite materials based on EN AW-Al Cu4Mg1 (A) aluminum alloy reinforced with the Al2O3 ceramic particles
• *10th International Conference on Advances in Materials and Processing Technologies, AMPT 2007, 7-11.10.2007, Daejeon, South Korea:
- Laser surface treatment of multicrystalline silicon for enhancing optical properties
- Structure and mechanical properties of gradient PVD coatings
• *International Conference on Surfaces, Coatings and Nanostructured Materials, nanoSMat’2007, 9-11.07.2007, Algarve, Portugal:
- Mechanical properties of gradient coatings deposited by PVD techniques onto the X40CrMoV5-1 steel substrate
- Characterization and performance of laser melted commercial tool steels
• 8th International Scientific Conference „Customer Satisfaction is the Reason of Prosperity and the Future Development of all Castings Components Companies in the European Union“, 9-11.05.2007, Truskavec, Ukraine:
- Microstructure of MCMgAl12Zn1 magnesium alloy
- Quality analysis of the Al-Si-Cu alloy castings
- The effect of copper concentration on the microstructure of Al-Si-Cu alloys
• 13th International Symposium on Metallography, 1-4.05.2007, Stara Lesna, Slovak Republic:
- Softmagnetic composite materials polymer – particles powder Co68Fe4Mo1Si13.5B13.5 alloy
• MATERIALS 2007 – 13th Conference of Sociedade Portuguesa de Materiais, IV International Materials Conference Symposium – A Materials Science Forum: “Global Materials for the XXI Century: Challenges to Academia and Industry”, 1-4.04.2007, Porto, Portugal:
- The thermomechanical processing conditions and the mechanical properties of injection molded PP/PC blends
• *7th Asia Pacific Conference on Materials Processing, APCMP 2006, 4-8.12.2006, Singapur:
- Structure and properties of gradient tool materials with HS6-5-2 high-speed steel
- Structure and properties of magnesium cast alloys
- Applications of the artificial intelligence methods for modeling of the ACAlSi7Cu alloy crystallization process
- Modelling of CCT diagrams for engineering and constructional steels
- Computer simulation of hard magnetic composite materials Nd-Fe-B properties
• *International Conference Vacuum and Plasma Surface Engineering, 26-28.10.2006, Liberec, Czech Republic:
- PVD and CVD coatings and laser surface layers
• 20th International Conference on Scientific Data and Knowledge within the Information Society, CODATA 2006, 22-25.10.2006, Beijing, China:
- Concept of distance learning based on course management system applied in Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice, Poland
• Euro PM2006, European Powder Metallurgy Congress & Exhibition, 2-5.10.2006, Prague, Czech Republic:
- Effect of cooling rate on the properties of Ni Mo and Ni-Mo-W sintered steels
• *12. Internationalen Metallographie-Tagung, Fortschritte in der Metallographie, 27-29.09.2006, Leoben, Austria:
- Influence of the structure on the properties of new magnetic composite materials
• *15th Congress of International Federation for Heat Treatment and Surface Engineering, 25-27.09.2006, Vienna, Austria:
- Comparision of the influence of surface laser alloying of the 2CrMoV2-2 tool steel using NbC and TaC powder
- Multifractal characteristic of surface topography of the coatings on cemented carbides
- Sintered duplex stainless steels and their properties
• 2006 Powder Metallurgy, World Congress & Exhibition, PM 2006, 24-28.09.2006, Busan, Korea:
- Structure and properties of EN AC-AlSi12 alloy reinforced by ceramic fibres and particles
- Sintered duplex stainless steels corrosion properties
• 12th International Manufacturing Conference in China, IMCC 2006, 21-23.09.2006, Xi’an, China:
- Diode laser modification of surface gradient layer properties of a hot-work tool steel
• International Science and Engineering Conference “Machine-Building and Technosphere of the XXI Century”, 11-16.09.2006, Sevastopol, Ukraine:
- Optimisation of the rivet joint of the ceramic composite material and 6061 aluminium alloy
• *9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, 30.07-3.08.2006, Las Vegas, USA:
- Corrosion behavior of vacuum sintered duplex stainless steels
- New composite materials with specific magnetic properties
- Methodology of automatic quality control of Al-Si casting alloys
- Surface laser alloying with TiC and WC powder of the 32CrMoV12-28 tool steel
- Comparison of the surface alloying of the 32CrMoV12-18 tool steel using TiC and WC powder
- Influence of cooling rate on the size of the β precipitation and thermal characteristic results of Al-Si cast alloys
- Structure and wear resistance of the PVD coatings deposited onto heat treated and plasma nitrited hot work tool steel
- Influence of heat treatment on properties and corrosion resistance of PM composite materials based on aluminum alloy reinforced with ceramic particles
- Multifractal characteristic of surface topography of the wear resistant PVD coatings on sintered tool materials
- Laser processing of multicrystalline silicon for texturizaton of solar cells
• 22th International Conference on CAD/CAM, Robotics and Factories of the Future, CARs & FOF 2006, 19-22.07.2006, Vellore, India:
- Distance learning in Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice, Poland
• *5th International Conference on Processing & Manufacturing of Advanced Materials – Processing, Fabrication, Properties, Application, THERMEC’2006, 4-8.07.2006, Vancouver, Canada:
- Influence of cooling rate on the size of the precipitates and thermal characteristic of Al-Si cast alloys
- Structure and properties of PM composite materials based on EN AW-AlCu4Mg1(A) aluminium alloy reinforced with the Ti(C,N) particles
- Influence of heat treatment on structure and properties of the cast magnesium alloys
- Effect of manufacturing methods on structure and properties of the gradient tool materials with the non-alloy steel matrix reinforced with the HS6-5-2 type high-speed steel
- Properties of vacuum sintered duplex stainless steels
- Methodology for automatic control of automotive Al-Si cast components
• 14th International Conference on Composites/Nano Engineering, ICCE-14, 2-8.07.2006, Boulder, Colorado, USA:
- New possibilities of application of composite materials with specific magnetic properties
• 16th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2006, 26-28.06.2006, Limerick, Ireland:
- Properties of vacuum sintered duplex stainless steels
- Structure and properties of the X40CrMoV5-1 and 55NiCrMoV7 hot work tool steels with the surface layers laser alloyed with the ceramic powders
• *5th International Surface Engineering Congress ISEC’2006, 15-18.05.2006, Seattle, USA:
- Finite Element Method application for modeling of PVD coatings properties
- Surface properties modification of hot-work tool steel by the use HPDL laser treatment
• 9th CIRP International Workshop on Modeling of Machining Operations, 11-12.05.2006, Bled, Slovenia, 2006:
- Functional properties of PVD and CVD coated tool ceramics
• *7th International Tooling Conference “Tooling Materials and their applications from research to market”, 2-5.05.2006, Turin, Italy:
- Characterizations and wear properties of gradient and multilayer coatings deposited on the sintered tool materials
- Comparison of structure and mechanical properties of HS12-1-5-5 type high-speed steels produced by PIM method and heat treated
- Improvement of hot work steels wear resistance by plasma nitriding and PVD coatings
- Employment of the finite element method for determining stresses in coatings obtained on high speed steel with the PVD process
- Diode laser surface treatment of hot-work tool steel
• 3rd International Conference on Thermal Process Modelling and Simulation, 27-29.04.2006, Budapest, Hungary:
- Modelling of magnetic, mechanical properties and corrosive wear of hard magnetic composite materials Nd-Fe-B
- Methodology of quality assessment of castings from Al-Si
• 6th Scientific/Research Symposium with International Participation “Metal and Non-metal Inorganic Materials: production – properties – application”, 27-28.04.2006, Zenica, Bosnia and Herzegovina:
- Effect of cooling rate on the solidification behavior of ACAl7Si2Cu
• *9th International Conference on Material Forming, ESAFORM, 26-28.04.2006, Glasgow, Great Britain:
- Diversity of processing induced morphologies in polymer/polymer composites and nanocomposites and their effect on the mechanical properties
• *2nd Pacific International Conference on Application of Laser and Optics, PICALO’2006, 31.03-9.04.2006, Melbourne, Australia:
- Surface laser alloying with ceramic powders of the X40CrMoV5-1 tool steel
• 1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufacturing and Materials Processing, ICMM 2006, 14-15.03.2006, Kuala Lumpur, Malisia:
- Properties and structures of gradient layer surface of 32CrMoV12-28 hot work steel alloyed using high power diode laser
• International Conference on Superhard Coatings, 27.02-1.03.2006, Ein Gedi, Israel:
- Nanocrystalline gradient and multilayers coatings deposited onto sintered tool materials
• Seminar on Application of Lasers in Material Processing, 3-4.02.2006, Kolkata, India:
- The influence of laser alloying conditions on the structure and properties of hot work tool steels surface
• *Konferencja Grupy Roboczej Ekspertów CIRP, 25-27.01.2006, Paris, France:
- Cutting ability improvement of sintered tool materials by deposition if gradient and multilayers coatings
• Teheran International Congress on Manufacturing Engineering TICME2005, 12-15.12.2005, Teheran, Iran:
- Fundamental understanding of crystallisation mechanism of laser alloyed tool steel
• International Advanced Technology Congress, ATCi’2005, 6-8.12.2005, Putrajaya, Malisia:
- The sense of artificial intelligence in designing new materials
• International Symposium on Functional Materials, 5-8.12.2005, Kuala Lumpur, Malisia:
- Hard magnetic composite materials and Nd-Fe-B with additions of iron and X2CrNiMo-17-12-2 steel
• 4th International Conference on Materials Processing for Properties and Performance (MP3), 30.11-2.12.2005, Tsukuba Science City Ibaraki, Japan:
- Diode laser surface treatment of X40CrMoV5-1 hot-work tool steel
- Characterization of cutting tools made from cemented carbides coated with wear resistance surface layers
• 24th International Congress on Application of Laser & Electro-Optics, ICALEO 2005, 31.10-3.11.2005, Miami, Florida, USA:
- Laser modification of hot-work tool steels gradient layers
• 5th International Latin-American Conference on Powder Technology, PTECH2005, 26-29.10. 2005, Costa do Sauípe – Salvador, Brazil:
- Structural characteristics of the modern sintered tool materials
- Composite materials based on EN AW-Al Cu4Mg1(A) aluminium alloy reinforced with the Ti(C,N) ceramic particles
• 2nd International Conference on Manufacturing Engineering, ICMEN, 5-7.10.2005, Kallithea – Chalkidiki, Greece:
- Influence of vanadium carbide ceramic powder on structure and properties of hot work tool steel alloyed with HPDL laser
- Application of high power diode laser for alloying the X38CrMoV5-3 steel surface layer with tungsten carbide
• *International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, 7-9.09.2005, Aveiro, Portugal:
- Laser modification of hot-work tool steels gradient layers
- Tool steel faze transformations in HPDL laser assisted heat treatment
- Structure and properties of the anti-wear and corrosion resistant coatings deposited by PVD and CVD technique onto the nitride tool ceramics substrate
- Application of high power diode laser for alloying the X38CrMoV5-3 steel surface layer with tungsten carbide
• *9th International Research/Expert Conference on Trends in Development of Machinery and Associated Technology, TMT 2005, 26-30.09.2005, Antalaya, Turkey:
- Structure and properties of cemented carbides and Al2O3 oxide ceramics deposited by PVD coatings
• RIVA 5 – 5th Iberian Vacuum Meeting, XI Spanish Vacuum Meeting, 18-21.09.2005, Guimaraes, Portugal:
- Characterisation of the TiN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrided hot work tool steel
• 10th International Conference on Theoretical and Experimental Problems of Materials Engineering, Progress in Materials Engineering, PiME'05, 30.08-1.09.2005, Roznov pod Radhostem, Czech Republic:
- Surface hardening of hot work tool steel using a high power diode laser
• *International Forum on Advances in Materials Processing Technology IFAMPT’2005, 29.08-1.09.2005, Glasgow, Great Britain:
- Computer aided classification of flaws occurred during casting of aluminium
• *2nd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, 20-22.06.2005, Riva del Garda, Italy:
- Effect of diode laser surface alloying of hot-work tool steel
• *1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, IFHTSE 2005, 8-11.06.2005, Pula, Croatia:
- Effect of laser HPDL surface modification of X40CrMoV5-1 hot-work tool steel
- Computer simulation of the hardenability of heat-treatable steels
• *5th International Conference on Industrial Tools, ICIT’2005, 12-15.04.2005, Velenje, Cejle, Slovenia:
- Properties of cutting ability of the nitride tool ceramics coated by PVD and CVD coatings
- Effect of depositing multilayers on properties of the selected cemented carbides, cermets and tool ceramics
- Influence of debinding process on microstructure and properties of HS6-5-2- HSS parts produced by powder injection moulding
- Employment of neural networks for modelling of corrosive wear of hard magnetic composite materials
• Seventh International Conference on Applied Mechanics 2005, 28.03-1.04.2005, Hrotovice, Czech Republic:
- Structure and properties of the surface layer obtained by laser treatment of the X38CrMoV5-3 hot work tool steel
• *Conference on Processing and Fabrication of Advanced Materials XIII, PFAM 2004, 6-8.12.2004, Singapur:
- Composite materials Nd-Fe-B
- Magnetic properties and structure of the finemet alloy powders bound with polymer
- Influence of temperature annealing on structure and magnetic properties of cobalt-matrix powders alloys obtained in high-energy ball milling
- Continuous cooling transformations diagrams of engineering steels predicted by the use of artificial intelligence methodology
- Influence of atmosphere and temperature of debinding on microstructure of HS6-5-2 HSS parts produced by powder injection moulding
- Coatings deposited onto the cermets
- Adhesion of monolayers coatings deposited by magnetron sputtering process onto the brass substrate
- Tribological and mechanical properties of the hard wear resistant coatings deposited onto the nitride tool ceramics
- Structure and properties of PVD and CVD coated oxide ceramic tool materials based on Al2O3
- Characteristics of the laser alloyed hot-work steels
• *3rd International Conference on Advanced Materials Processing (ICAMP-3) and the Australasian Ceramic Society Biannual International Conference (Austceram 2004), 29.11-1.12.2004, Melbourne, Australia:
- Development of surface layers alloyed by HPDL laser on hot-work tool steel
- Structure and properties of the Si3N4 nitride ceramics with PVD and CVD coatings
• *3rd International Conference on Materials Processing for Properties and Performance (MP3), 24-26.11.2004, Singapur:
- The investigation of microstructures and properties of X40CrMoV5-1 hot work tool steel after laser alloying
- Structure and properties of polymer matrix hard magnetic composite materials Nd-Fe-B
• EURO PM2004, European Powder Metallurgy, World Congress & Exhibition, 17-21.10.2004, Vienna, Austria:
- Properties of vacuum sintered Duplex Stainless Steels
- Microstructure and mechanical properties of T15 high-speed steels parts produced by powder injection moulding using a polyethylene based binder
• Workshop on Functional Materials, FMA’2004, 23-26.09.2004, Athens, Greece:
- Employment of a high power diode laser for alloying the X40CrMoV5-1 steel surface layer with tungsten carbide
• Scientific Conference with International Participation “Manufacturing and Management in the 21st Century”, 16-17.09.2004, Ohrid, Macedonia:
- Structure and mechanical properties of sintered duplex steels
- Structure and application properties of polymer matrix hard magnetic composite materials reinforced with Nd-Fe-B nanocrystalline particles with metal addition
- Modelling relationship between the steel chemical composition and the temperature of the pearlitic transformation start
• 11th International Science and Engineering Conference “Machine-Building and Technosphere of the 21st Century”, 13-18.09.2004, Sevastopol, Ukraine:
- Tribological behaviour of the X40CrMoV5-1 steel alloyed with tungsten carbide using the high power diode laser
- Effect of the hard surface coatings on properties of the sintered tool materials
• 11th International Conference on Composites/Nano Engineering, ICCE-11, 8-14.08.2004, South Carolina, USA:
- Tribological properties of the Al2O3+TiC based tool ceramic reinforced with PVD wear resistant coatings
• Workshop WS-15 on Surface Engineering for Hard Coatings, Recent Advances in Thin Films and Hard Coatings, 4-8.07.2004, Ávila, Spain:
- Effect of the hard surface coatings on properties of the sintered tool materials
• E-MRS 2004 Spring Meeting, Symposium N, Laser interactions in materials: nanoscale to mesoscale, 24-28.05.2004, Strasbourg, France:
- Alloying the X40CrMoV5-1 steel surface layer with tungsten carbide by the use of a High Power Diode Laser
• 4th International Latin-American Conference on Powder Technology, PTECH 2003, 19-21.11. 2003, Guarujá, Sao Paulo, Brazil:
- Structure and properties of the selected cemented carbides and cermets covered with the TiN(Ti,Al,Si)N/TiN coatings in the Cathodic Arc Evaporation process
• *XVII International Congress of Mechanical Engineering COBEM’2003, 10-14.11.2003, Sao Paulo, Brazil:
- Structure and properties of nanocrystalinne soft magnetic composite materials with polymer matrix
- Effects of alloying elements concentration and cooling transformations predicted by neural network
• European Powder Metallurgy Conference on Meeting the Challenges of a Changing Market Place, Euro PM2003, 20-22.10.2003, Valencia, Spain:
Mechanically milled AA6061/(Ti3Al)p MMC reinforced with intermetallics
• *I Ukraińsko-Polska Konferencja Naukowa nt. Współczesne techniki wytwarzania w rozwoju ekonomicznej integracji oraz przedsiębiorczości, 16-18.10.2003, Satanov, Ukraine:
- Własności trybologiczne warstwy wierzchniej stali X40CrMoV5-1 stopowanej węglikiem wolframu przy użyciu lasera diodowego dużej mocy HPDL
- Modelowanie hartowności stali z zastosowaniem sztucznych sieci neuronowych
• 6th International Conference on Modern Technologies in Manufacturing, MTeM’2003, 2-4.10. 2003, Cluj-Napoca, Romania:
- Tribology of PVD thin coatings
- Fractal character of surface topography of Ti+Ti(C,N) coatings obtained using magnetron sputtering
• 1st International Conference on Computer Aided Design and Manufacturing, CADAM 2003, 30.09-3.10.2003, Sibenik, Croatia:
- Effect of the chemical composition on secondary hardness of the high speed steels
• 7th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology”, TMT 2003, 15-16.09.2003, Lloret de Mar, Barcelona, Spain:
- Corrosion resistance of the PVD coatings deposited on the brass substrate
- Influence of heat-treatment on structure and properties of the HS6-5-2 and HS12-1-5-5 high-speed steels produced by PIM process
- Investigation of properties of the Si3N4 nitride tool ceramics covered with hard surface layers in the process of CVD and PVD
• Tenth Annual International Conference on Composites/Nano Engineering, ICEE-10, 20-26.07.2003, New Orlean, USA:
- Structures and properties of the hard surface coatings depositing on cemented carbides and cermets
- Structures and chemical compositions of primary carbides in HS6-5-2 and HS12-1-5-5 high-speed steels manufactured with PIM method
- The structure and properties of nanocrystalline powders obtained by high-energy ball milling process
• *International Conference on Advanced Materials and Processing Technologies, AMPT 2003, 8 11.07.2003, Dublin, Ireland:
- Application of high power diode laser (HPDL) for alloying of X40CrMoV5-1 steel surface layer by tungsten carbides
- The structure and magnetic properties of magnetically soft cobalt base nanocystalline powders and nanocomposites with silicon binding
- Improvement of hot work steels wear resistance by PVD coatings deposition
- Mechanically milled AA6061/(Ti3Al)p MMC reinforced with intermetallics – the structure and properties
• *2nd International Conference on Materials for Advanced Technologies, ICMAT 2003, 29.06-4.07.2003, Singapur:
- Structure and properties of hot-work tool steels alloyed by WC carbides by a use of High Power Diode Laser
• 4th International Conference on Industrial Tool, ICIT 2003, 8-12.04.2003, Bled – Celje, Slovenia:
- Effect of laser HPDL surface alloying of X40CrMoV5-1 hot-work tool steel
• *2nd International Conference Advanced Materials Processing, ICAMP 2002, 2-4.12.2002, Singapur:
- Properties of PVD coatings on the brass substrate
- Application of neural networks for prediction of hardness and volume fractions of structural compo-nents in constructional steels cooled from the austenitizing temperature
- Surface layer’s structure of X40CrMoV5-1 steel remelted and/or WC alloyed with HPDL laser
- Structure and properties of nanocrystalline composite materials
- Structure and properties of the heat-treated high-speed steel HS6-5-2 and HS12-1-5-5 produced by Powder Injection Molding process
- Structure and properties of TiN/TiAlSiN/TiN PVD coatings on cemented carbides and cermets
- Effect of heat treatment on structure and properties of experimental hot-work tool steel 47CrMoWVTiCeZr16-26-8
• *6th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology”, 18-22.09.2002, Neum, Bosnia and Herzegovina:
- Effects of the substrate potential on the Ti+Ti(C,N) coatings’ properties obtained in the PVD process on the sintered high speed steel
- Wear behavior on PVD coated end mills in high-speed machining
• 11th International Metallurgical and Material Conference, Metal 2002, 14-16.05.2002, Hradec nad Moravici, Czech Republic:
- PVD coatings on the ASP30 sintered high speed steel
• *16th Brazilian Congress of Mechanical Engineering, COBEM 2001, Uberlândia, Brazil, 26-30.11.2001:
- The role of materials design in engineering design process of product and their elements
- Structure, corrosion resistance and mechanical properties of the PVD coatings deposited on the brass substrate
• *6th International Conference on Advanced Mechanical Engineering & Technology, AMTECH 2001, Sozopol, Bulgaria, 3-5.10.2001:
- Obtaining of (TiMe)/(TiMe)CxN1-x coating in the vacuum furnace by magnetron sputtering on a titanium alloy
• *International Conference Advances in Materials and Processing Technologies AMPT’2001, 18-21.09.2001, Leganes, Spain:
- Properties of PVD multi-layers Ti/CrN and Ti/TiAlN coatings on brass-structure
• *8th Seminar of International Federation for Heat Treatment and Surface Engineering IFHTSE’2001, 12-14.09.2001, Dubrownik – Cavtat, Croatia:
- The modelling of high speed steels properties using neutral networks
- Application of neutral networks for prediction of structural steels properties
• *8th Annual International Conference on Composites Engineering ICCE/8, 5-11.08.2001, Tenerife, Spain:
- Effect of depositing hard surface coatings on properties of the selected cemented carbides and tool cermets
• Zestawienie innych referatów na międzynarodowych Konferencjach naukowych w Polsce – przedstawionych
w formie prezentacji lub posteru, * oznacza osobisty udział w konferencji (Konferencji krajowych nie uwzględniono)
• *22nd Winter International Scientific Conference on "Achievements in Mechanical and Materials Engineering", Winter-AMME’2015, 6-9.12.2015, Zakopane:
- Transparent platinum counter electrode for dye-sensitized solar cells
- Atomic layer deposition of TiO2 onto porous biomaterials
- The use of artificial neural networks for the prediction of sulphur content in hot metal produced in blast furnace
- Influence of the milling time and MWCNT content on the wear properties of the AA6061/MWCNT nanocomposites
- Effect of nanowires and nanoparticles of copper on the structure and properties of the nanocomposite polymeric materials
- Comparative analysis of mechanical properties of scaffolds sintered from Ti and Ti6Al4V powders
- The influence of natural and synthetic dyes on the absorbance of nanocrystalline TiO2 used in dye sensitized solar cells
- Microstructure and properties of the hot work tool steel gradient surface layer obtained using laser alloying with tungsten carbide ceramic powder
- Manufacturing of ceramic porous preforms by sintering of Al2O3 powder
- Surface morphology and optical properties of Al2O3 thin films deposited by ALD method
- Graphene oxide film as semi-transparent counter electrode for dye-sensitized solar cell
- Obtaining copper nanoparticles from poly(vinyl) alcohol matrix nanocomposite
• *International Conference on Innovative Manufacturing Technology IMT 2014, 3-5.12.2014, Zakopane:
- Scale minimization as a symptom of development in the surface engineering research
- Fabrication of the aluminium matrix nanocomposites with halloysite and carbon nanotubes
• *International Conference on Innovative Manufacturing Technology IMT 2013, 18-20.11.2013, Kraków:
- Structure and properties of the high-manganese TWIP austenitic steels for automotive industry
• *21st International Scientific Conference on "Achievements in Mechanical and Materials Engineering", AMME’2013, 23-26.06.2013, Gliwice – Kraków:
- Composite materials based on EN AW-AlMg1SiCu aluminium alloy reinforced with halloysite particles
- Effect of water dilution and alcohol mixing on erosive potential of orange juice on bovine enamel
- Selection of components for photovoltaic system
- Computer aided design in Selective Laser Sintering (SLS) – application in medicine
- Biodegradable PVA and PEO polimeric nanofibers received in electrostatic field
- Investigations of coatings obtained by PVD process on ceramic tool materials
- Structure and properties of PVD coatings deposited on cermets
- Research of the wear resistant PVD coatings deposited on the sintered tool materials
- The influence of reinforcement portion on wear coefficient of composite materials manufactured by pressure infiltration
- Influence analysis of admixtures on mechanical properties of non-alloy structural steels
- Influence of manufacturing process of organic coated galvanized metal sheets on their properties
- Structure of X11MnSiAl17-1-3 steel after hot-rolling and Gleeble simulations
- Al2O3 antireflection coatings for silicon solar cells
- Properties of stainless steel based on ferritic steel X6Cr13 made by powder metallurgy
- Surface quality in selective laser melting of metal powders
- Influence of technological parameters of the SLS method on AM steel parts
- Towards a design for ecological management & product sustainability – european and brazilian approaches
- The comparison of computer methods for porosity evaluation in sintered constructional steels
- Aluminasilicates as an reinforcement in polymer matrix composites
- Biomechanical analysis of stabilizer for the treatment of long bone fractures - comparison of the two computing environments
- Influence the heat treatment of two base metal alloys used on dental prosthesis on corrosion resistance
- Influence of introducing silver nanoparticles on tribological characteristics of soft liner
- Electrical properties of mono and polycrystalline solar cells
- Structure and mechanical properties of high-manganese austenitic TWIP type steels
- Improvement of wear resistance of the hot work tool steel by laser surface feeding with ceramic powder
- The influence of carbon nanotubes at the mechanical properties of nanocomposites
- Finite Element Method application for modelling of internal oesophageal prosthesis
- Influence of the casting temperature on dental Co-base alloys properties
- The simulation of a mastication efficiency of the mucous-borne complete dentures
- HPDL laser alloying of Al-Si-Cu alloy with Al2O3 powder
- Properties determination of two-layer coatings deposited by PVD techniques using computer simulation
- TEM microstructure investigations of aluminium alloys used as coating substrate
• *20th International Scientific Conference on "Achievements in Mechanical and Materials Engineering", AMME’2012, 9-12.09.2012, Gliwice – Kołobrzeg:
- Sol gel TiO2 antireflection coatings for silicon solar cells
- Informative technologies in the material products designing
- The comparison of computer methods to porosity evaluation in sintered constructional steels
- Physical properties of magnetostrictive composite materials with polyurethane matrix
- Comparison of the CrN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrited steel
- Effect of mechanical alloying on the morphology and microstructure of EN AW6061/HNT composites
- Thermo-mechanical processing and microstructure evolution of high-manganese austenitic TRIP-type steels
- The computer simulation of internal stresses of tool gradient materials reinforced with the WC-Co
- Comparision of the abrasion wear resistance of the laser alloyed hot work tool steels
- Fabrication methods and heat treatment conditions effect on structure and properties of the gradient tool materials
- Monocrystalline silicon solar cells applied in photovoltaic system
- Corrosion resistance of polymer matrix nanocomposite
- TEM investigations of laser texturized polycrystalline silicon solar cell
- Effect of age hardening on corrosion resistance and hardness of CoCrMo alloys used in dental engineering
- PVD gradient coatings on sialon tool ceramics
- Nanostructured composite materials
- Computational materials science
- Biomaterials for medical implantation
• 18h International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S'2012, 27-29.02.2012, Gliwice – Ustroń:
- Własności eksploatacyjne powłok PVD na spiekanych materiałach narzędziowych
- Odporność na zużycie ścierne aluminiowych materiałów kompozytowych
- Cienkie warstwy organiczne stosowane w optoelektronice i fotowoltaice
- Wykorzystanie metody elementów skończonych w procesie tłoczenia aluminium
- Odporność korozyjna stopów kobaltu stosowanych w inżynierii stomatologicznej
- Własności powłok PVD na azotowanej plazmowo stali typu X37CrMoV5-1
- Odporność na zużycie ścierne stali obrabianej laserowo
- Struktura spiekanych gradientowych materiałów narzędziowych na osnowie kobaltu
- Wykorzystanie technik informatycznych w zarządzaniu BHP
- Materiały kompozytowe EN AW6061/HNT wytwarzane przez mechaniczne mielenie
- Magnetostrykcyjne materiały kompozytowe o osnowie poliuretanowej
- Wykorzystanie mikroskopii sił atomowych w badaniach cienkich warstw
- Struktura powłok PVD na ceramice sialonowej
- Eksperymentalna metoda badania ścieralności rur polimerowych
- Symulacja MES procesu przetapiania austenitycznej stali odpornej na korozję
- Techniczne znaczenie elektrody przedniej ogniwa fotowoltaicznego
- Ogniwa fotowoltaiczne 3D
- Badania morfologii grafitu ekspandowanego przy użyciu SEM
- Ocena struktury stopów Mg na podstawie analizy termiczno-derywacyjnej
- Odporność korozyjna materiałów kompozytowych Al/Al2O3
- Spiekane materiały gradientowe
- Wydzielenia fazy σ w stali ferrytyczno-austenitycznej X2CrNiMoN25-7-4
- Modelowanie ubytku masy przez zużycie ścierne przy zastosowaniu sztucznych sieci neuronowych
- Struktura nanowłókien PAN otrzymywanych w procesie elektroprzędzenia
- Zintegrowany model obliczeniowy zależności dla stali konstrukcyjnych
- Otrzymywanie polimerowych materiałów kompozytowych wzmacnianych haloizytem
- Badania powłok uzyskanych techniką PVD na ceramicznych materiałach narzędziowych
- Wyznaczenie własności elektrycznych krzemowego ogniwa fotowoltaicznego
- Własności elektryczne wykonanego modułu fotowoltaicznego
- Topografia laserowo teksturowanej powierzchni krzemu polikrystalicznego
- Metodologia projektowania powłok nanostrukturalnych
- Charakterystyka stali wysokomanganowych
- Nanokompozyty polimerowe o osnowie polipropylenu formowane wtryskowo
- Komputerowe wspomaganie CAD/CAM w inżynierii stomatologicznej
- Własności stali austenitycznych wysokomanganowych typu TRIP
• 6th Symposium on Vacuum based Science and Technology, 19-22.09.2011, Koszalin – Kołobrzeg:
- The effect of the PVD coatings structure on the sintered cutting edges durability
• 19th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME`2011, 29.05-1.06.2011, Gliwice – Wrocław:
- Hot deformation and recrystallization of advanced high-manganese austenitic TWIP steels
- Surface modification of sialon ceramics and cemented carbides by PVD coating deposition
- Analysis of alloying elements influence on properties of structural steel with use of materials science virtual laboratory
- Gradient PVD coatings deposited on the sintered tool materials
- Thermo-mechanical processing and microstructure evolution of high-manganese austenitic TRIP-type steels
- Characterization of the structure features of CeZrO2 and Ni/CeZrO2 catalysts for tar gasification with steam
- Thermal, structure and mechanical characteristic of the MB MgAl6Zn3 alloy
- Dynamic magnetic properties of magnetostrictive Td0.3Dy0.7Fe1.9 / polyurethane composite materials
- Application of halloysite nanotubes as an reinforcement in polyethylene nanocomposites
- Corrosion of NdFeB hard magnetic materials in NaCl solution
- The influence of Ni-P layer deposited onto Al2O3 on structure and properties of Al-Al2O3 composite materials
- Application of feature method to the modeling of composite structural elements
- Mechanical properties of polymer nanocomposites with diversified level of saturation of nanoparticles
- Laser surface alloying of sintered stainless steels with SiC powder
- Structure and electrical properties of screen printed contacts on silicon solar cells
- Non-standard test methods for long-fibrous reinforced composite materials
- Characteristics of structure and properties of a sintered graded tool materials with cobalt matrix
- The concept of preparation of oesophageal prosthesis based on long-fiber composite material
- The preparation of aramid fibres in silicone based composite materials
- Compared composite materials used as filler in dentistry
- Determination of internal stresses in (Ti,Al)N coatings with use of FEM
- Effect of Al additions and heat treatment on corrosion properties of Mg–Al based alloys
• XI Międzynarodowa Konferencja Naukowo-Techniczna „Polimery i kompozyty konstrukcyjne”, KOMPOZYTY 2011, 16-19.05.2011, Olsztyn,
- Koncepcja wewnątrzustrojowej protezy przełyku z wykorzystaniem wzmocnienia długowłóknistego
- Badania długowłóknistych materiałów kompozytowych z wykorzystaniem metod niestandardowych
- Kompozyty polimerowe wytwarzane metodami formowania wtryskowego
- Wirtualna wtryskarka tworzyw sztucznych
• 2010 E-MRS Fall Meeting, Symposium L: Novel Materials, Coats and Nanoengineering, 13-17.09.2010, Warsaw:
- Structure and properties investigation of a magnesium alloy processed by heat treatment and laser surface treatment
• 16h International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S'2010, 22-25.11.2010, Gliwice – Ustroń:
- Crystallization kinetics of Zn alloys modified with Ce, La, Sr, Ti, B
- Laser surface remelting and alloying of sintered stainless steels
- The influence of reinforcement shape on wear behaviour of aluminium matrix composite materials
- Magnetic properties of Co-based amorphous ribbon under cyclic heating and cooling
- Selective laser sintering method of manufacturing front electrode of silicon solar cell
- Image analysis used for aluminium alloy microstructure investigation
- The investigations of (Ti,Al)N and (Al,Ti)N coatings obtained by PVD process onto sintered cutting tools
- Image analysis used for aluminium alloy microstructure investigation
- Microstructure and properties of laser surface alloyed PM austenitic stainless steel
- Mechanical approach of PP/MMT polymer nanocompozites
- Microstructure forming processes of the 26Mn-3Si-3Al-Nb-Ti steel during hot-working conditions
- Laser surface treatment of cast magnesium alloys
- Manufacturing, properties and application of composite materials with specific magnetic properties
- Development of the laser method of multicrystalline silicon surface texturization
- Microstructure evolution of high-manganese steel during the thermomechanical processing
- Effect of the sintering parameters on structure of the gradient tool materials
- The materials science virtual laboratory project
- Abrasive wear resistance of the hot work tool steels remelted or alloyed by HDPL laser
- Effect of cooling rate on the solidification behavior of magnesium alloys
- Structure, texture and chemical composition of coatings deposited by PVD techniques
- Laser surface treatment of magnesium alloys with silicon carbide powder
- Structure and mechanical properties of PVD coatings for tool materials
- Structure of TiBN coatings deposited onto cemented carbides and sialon tool ceramics
- Selection of heat treatment condition of the Mg-Al-Zn alloys
- Intelligent epoxy matrix composite materials consisting of TbDyFe magnetostrictive particulates
- Stereometry specification of anodized and PVD coated surface of aluminium alloy
- Phases morphology and distributions of the Al-Si-Cu alloy
- Comparison of the PVD coatings deposited onto plasma nitrited hot work tool steel
- Computer simulation of stress in coatings obtained in PVD process
- The calculation of CCT diagrams for engineering steels
- Corrosion resistance of the sintered composite materials with the en AW-AlCu4Mg1(A) alloy matrix reinforced with Al2O3 and Ti(C,N) ceramic particles
- Corrosion resistance of the composite materials: nanocrystalline powder polymer type in acid environment
- The idea of material science virtual laboratory
- The comparison of tribological properties of the surface layer of the hot work tool steels obtained by laser alloying
- Application of FEM for solving various issues in material engineering
- Investigations of microstructure and dislocations of cast magnesium alloys
- Microstructure and mechanical properties of nanocomposite coatings deposited by cathodic arc evaporation
• 18th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME`2010, 13-16.06.2010, Gliwice – Wieliczka – Zakopane:
- Synthesis and characterization of carbon nanotubes decorated with platinum nanoparticles
- Investigation of the screen printing contacts by Transmissions Line Model measurements
- Laser surface processing of multicrystalline silicon
- Constructional model of internal oesophageal prosthesis
- Ti(C,N) and (Ti,Al)N hard wear resistant coatings
- Hardness to toughness relationship on WC-Co tool gradient materials by Palmqvist
- Mechanical approach of PP/MMT polymer nanocomposite
- The application of statistical models in wear resistance simulations of Al-Al2O3 composites
- Comparison of nanostructure and duplex PVD coatings deposited onto hot work tool steel substrate
- Composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the BN ceramic particles
- Application of artificial neural networks in modelling of quenched and tempered constructional steels mechanical properties
- The influence of laser modification on the structure and properties of the X40CrMoV5-1 and 32CrMoV12-28 hot work tool steels
- Effect of high power diode laser surface alloying on structure of MCMgAl12Zn1 alloy
- TEM investigations of laser texturised multicrystalline silicon solar cell
- Cooling rate influence on microstructure of the Zn-Al cast alloy
- Derivative thermo-analysis application to assess the cooling rate influence on the microstructure of Al-Si alloy cast
- Comparison of surface laser alloying of chosen tool steel using Al2O3 and ZrO2
- Microstructures of Mg-Al-Zn and Al-Si-Cu cast alloys
- Evaluation of the alloying elements effect on selected steels properties
- Laser surface remelting of wrought and sintered austenitic stainless steel
- Microstructure and properties of laser surface alloyed PM austenitic stainless steel
- Properties of Ti(B,N) coatings deposited onto cemented carbides and sialon tool ceramics
- Microstructure and mechanical properties of the high-manganese steels
- Thermal analysis, structure and mechanical properties of the MC MgAl3Zn1 cast alloy
- Microstructure forming processes of the 26Mn-3Si-3Al-Nb-Ti steel during hot-working conditions
- Polymer matrix composite materials reinforced by Tb0.3Dy0.7Fe1.9 magnetostrictive particles
- Microstructure and mechanical properties of nanocomposite coatings deposited by cathodic arc evaporation
- Gradient-structured, sintered MMC reinforced with hard carbide phases
- ECAP methods application on selected non-ferrous metals and alloys
- Finite Element Method application for determining feedstock distribution during powder injection moulding
- FEM application for modelling of PVD coatings properties
• 50. Międzynarodowa Konferencja Naukowa „Krzepnięcie i Krystalizacja Metali 2009”, 28-30.09.2009, Cedzyna, Kielce:
- Thermal and mechanical characteristics of cast Mg-Al-Zn alloy
- Derivative thermo analysis of the Al-Si cast alloy with addition of rare earths metals
• Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT’2009 (including: Scientific Conference on Computational Materials Science CMS'2009, Scientific Conference on Biomaterials and Bioengineering BIO'2009, 17th International Scientific Conference on Achievements of Mechanical and Materials Engineering AMME'2009, 15th Jubilee International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2009, Scientific Conference on Surface Engineering SE'2009, Scientific Conference on Nanotechnology and Nanomaterials NANO'2009, Scientific Conference on Polymers’ Technologies and Recycling PTR'2009), 14-17.06.2009, Gliwice – Gdańsk:
- Aluminium matrix composites fabricated by infiltration method
- Structure and mechanical properties of Mg-Si alloys at elevated temperatures
- Structure of TiBN coatings deposited onto cemented carbides and sialon tool ceramics
- Effect of cooling rate on the solidification behavior of magnesium alloys
- Functional properties of the sintered tool materials with (Ti,Al)N coating
- Finite element method application for modelling of mechanical properties
- FEM modelling of internal stresses in PVD coated
- Characteristic of vacuum sintered stainless steels
- Structure and properties of alloys of the Mg-Al-Zn system
- The influence of simultaneous impact of temperature and time on the properties and structure of X10CrWMoVNb9-2 steel
- Laser surface treatment of magnesium alloys with silicon carbide powder
- Influence of the laser modification of surface on properties and structure of magnesium alloys
- Laser surface treatment of cast magnesium alloys
- Selection of heat treatment condition of the Mg-Al-Zn alloys
- Manufacturing, properties and application of composite materials with specific magnetic properties
- Development of the laser method of multicrystalline silicon surface texturization
- Intelligent epoxy matrix composite materials consisting of Tb0.3Dy0.7Fe1.9 magnetostrictive particulates
- Studying of kinetic growth of organic thin films
- Effect of the sintering parameters on structure of the gradient tool materials
- Computer aid in examination of the chemical composition and treatment parameters influence on mechanical properties of structural steels
- Corrosion resistance of the composite materials: nanocrystalline powder – polymer type in acid environment
- Morphological aspect of multilaminar PP composite
- Laser surface treatment of the hot work tool steel with TaC and VC carbide powders
- Structure, texture and chemical composition of coatings deposited by PVD techniques
- Structure changes and mechanical properties of laser alloyed magnesium cast alloys
- Microstructure analysis of the modified casting magnesium alloys after heat and laser treatment
- Stereometry specification of anodised and PVD coated surface of aluminium alloy
- Structure investigation of the Al-Si-Cu alloy using derivative thermo analysis
- Phases morphology and distribution of the Al-Si-Cu alloy
- Computer aided determination of porosity in sintered steels
- Microstructure evolution of high-manganese steel during the thermomechanical processing
- The elimination of micropores and surface defects in aramid-silicon laminated materials with special properties
- Comparison of the PVD coatings
- The calculation of CCT diagrams for engineering steels
• 4th International Conference on Mechatronic Systems and Materials, MSM 2008, 14-17.07. 2008, Bialystok:
- Materials Science Virtual Laboratory – Innovatory Didactic Tool in the Teaching of Material Engineering Performed by Traditional and e-learning Methods
• 49. Międzynarodowa Konferencja Naukowa „Krzepnięcie i Krystalizacja Metali 2008”, 23-25.09.2008, Cedzyna, Kielce:
- Derivative thermo analysis of the near eutectic Al-Si-Cu alloy
- Anodization of cast aluminium alloys produced by different casting methods
• 16th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME`2008, 22-25.06.2008, Gliwice – Ryn:
- Gradient tool WC/HS6-5-2 materials produced using the powder metallurgy method
- Thermal characteristics of the AM50 magnesium alloy
- Laser surface treatment of magnesium alloy with WC powder
- Polymer composite strengthening by developed injection moulding technique
- The study of properties of laser modified hot-work tool steel surface layer
- Automatic classification of the 13CrMo4-5 steel worked in creep conditions
- XPS and AES analysis of PVD coatings
- Structure and properties of tool gradient materials reinforced with the WC carbides
- Investigation of the MCMgAl12Zn1 magnesium alloys structure after heat treatment
- Neural network application in simulations of composites Al-Al2O3 tribological properties
- Influence of hot-working conditions on a structure of high-manganese austenitic steels
- Sintered composite gradient tool materials
- Finite element method application for modeling of PVD coatings properties
- Microstructure and mechanical properties of the Al-Ti alloy with calcium addition
- Laser texturization in technology of multicrystalline silicon solar cells
- Virtual tensile test machine as an example of Material Science Virtual Laboratory post
- The significance of multimedia didactic aids in the informative society
- Innovative PM duplex stainless steels obtained basing on the Schaeffler diagram
- E-learning on the example of materials science
- Stereometry specification of anodization surface of casting aluminium alloys
- Application of the artificial neural networks for prediction of magnetic saturation of metallic amorphous alloys
- Comparison of the PVD gradient coatings deposited onto X40CrMoV5-1 and HS6-5-2 tool steel substrate
- Development of a feedstock formulation based on PP for MIM of carbides reinforced M2
- Comparison of the structure, properties and wear resistance of the TiN PVD coatings
- Manufacturing of aluminium matrix composite materials reinforced by Al2O3 particles
- Corrosion resistance of composite materials Fe73.5Cu1Nb3Si13.5B9 – PE type in acid environment
- Structure analysis of Al cast alloy
- Modelling of hardness prediction of magnesium alloys using artificial neural networks applications
- Surface modification of the X40CrMoV5-1 steel by laser alloying and PVD coatings deposition
- Microstructure and mechanical properties of polypropylene/polycarbonate blends
- Influence of the ageing on mechanical properties of the aluminium alloy AlSi9Mg
- Project of neural network for steel grade selection with the assumed CCT diagram
- Aramid-silicon laminated materials with special properties – new perspective of its usage
- Gradient nanocomposites obtained by injection moulding technique
- Thermo-mechanical processing of high-manganese austenitic steels
- Ferritic-austenitic duplex stainless steels sintered with convection cooling
- Tool gradient materials on the matrix cobalt
- Laser surface treatment of magnesium alloys Mg-Al-Zn
- Laser texturing of multicrystalline silicon surface
- Quality management of education in the university
- Sintered tool materials with PVD coatings
- Sintering gradient tool materials with the unalloyed steel matrix
- The Materials Science Virtual Laboratory Project
- Structure and properties of the surface layer of the X40CrMoV5-1 steel laser alloyed
- Artificial Intelligence methods in steel products properties prediction
- The application of laser for properties modification of lightweigth alloys surface
- The educational platform – interactive tool of distance learning
- Project of neural network for steel grade selection with the assumed CCT diagram
- The structure of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel
- Modelling properties of the hot work tool steels after laser surface treatment
- PVD gradient coatings deposited onto tool ceramics
- Polymer-bonded magnetostrictive composites
- PVD gradient coatings for sintered tool materials
- Investigations of PVD coatings with use of AES and XPS techniques
- Hard magnetic composite materials Nd-Fe-B with polymer matrix
- Multiscale modeling in material science
- Employment of Prolog for metallographic microsections technology design
- Sintered gradient tool materials reinforced with high speed steel
- Structure and properties of nanocomposite soft magnetic materials
- Modern composite materials fabricated by infiltration method
- Thermal-derivation analysis of magnesium casting alloys
- Defects classification of aluminium alloys casts using artificial intelligence methods
- Multifractal characteristics of PVD and CVD coatings
- Alloying of the 32CrMoV12-28 steel with ceramic powders using HPDL laser
- Structure and mechanical properties of gradient coatings deposited by PVD technology
- PVD and CVD coatings deposited on the nitride tool ceramics
- PVD coatings deposited onto plasma nitrited X37CrMoV5-1 type hot work tool steel
- Influence of age-hardening on selected properties of aluminium alloy AlSi9Mg
- FEM application for modeling of stresses in the PVD coatings
- Precipitation hardening of the Mg-Al-Zn alloys
- Employment of the artificial neural networks for prediction of magnetic saturation
- Structure and properties metal matrix composites
• 48. Międzynarodowa Konferencja Naukowa „Krzepnięcie i Krystalizacja Metali 2007”, 25-27.09.2007, Sielpia, Kielce:
- Microstructure analysis of the automotive Al-Si-Cu casting
- Microstructure analysis of MCMgAl16Zn1 MCMgAl8Zn1 MCMgAl4Zn1 cast magnesium alloys
• Fall 2007 MRS Forum on Materials Science Education, Symposium Genetic Algorithms in Materials Science and Engineering, GAMS2007, 17-21.09.2007, Warsaw:
- On the implementation of virtual machines in computer aided education
• XVIII Physical Metallurgy and Materials Science Conference Advanced Materials & Technologies, AMT 2007, 18-21.06.2007, Warsaw – Jachranka:
- Characteristics of structure and properties of a sintered graded tool materials
- Characteristics of MCMgAl9Zn1 and MCMgAl6Zn1 magnesium alloys structure
- Aluminium matrix composites fabricated by pressure infiltration process
- Multicomponent and gradient PVD coatings deposited on the sintered tool materials
- Application of neural networks for analysis of relationship between the service properties of CVD coatings and their multifractal parameters
• Worldwide Congress on Materials and Manufacturing Engineering and Technology COMMENT’2007 (including: 15th Jubilee International Scientific Conference on Achievements of Mechanical and Materials Engineering AMME'2007, 13th International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2007, Bidisciplinary Occasional Scientific Session BOSS'2007, Scientific Conference on Polymeric Materials Engineering POLYMERS'2007, Scientific Conference on Contemporary Achievements in Biomaterials and Biomedical Engineering CABBE'2007, International Scientific Conference on Foundry Technologies FOUND'2007, Scientific Conference on Total Management in Manufacturing Technologies TMMT'2007), 27-30.05.2007, Gliwice – Kraków – Zakopane:
- Mechanical properties of magnesium casting alloys
- A novel approach to the design and optimization of aluminum cast component heat treatment processes using advanced UMSA physical simulations
- Sinter-hardening process applicable to stainless steels
- Utilization of sinter-hardening treatment for various sintered steels
- Influence of hard ceramic particles on structure and properties of TGM
- Investigation of hard gradient PVD (Ti,Al,Si)N coating
- Application of pressure infiltration to the manufacturing of aluminum matrix composite materials with different reinforcement shape
- Hard magnetic materials Nd-Fe-B/Fe with epoxy resin matrix
- Hard and wear resistant coatings for cutting tools
- Mechanical properties of the PVD gradient coatings deposited onto the hot work tool steel X40CrMoV5-1
- PVD and CVD coating systems on oxide tool ceramics
- Investigation of the structure and properties of PVD and CVD coatings deposited on the Si3N4 nitride ceramics
- Application of nanostructural materials in manufacturing of soft magnetic composite materials Fe73.5Cu1Nb3Si13.5B9-PEHD type
- Structure and properties of hot-work tool steel alloyed by WC carbides by a use of high power diode laser
- Mechanical properties and structure of the Cr-Mo-V low-alloyed steel after long-term service in creep condition
- Mechanical properties of the surface layer of the laser alloyed 32CrMoV12-28 steel
- Computer aided system for selection of parameters for making metallographic microsections
- Usage of e-learning in teaching fundamentals of materials science
- Comparison of the secondary hardness effect after tempering of the hot-work tool steels
- Modelling of properties of the PVD coatings using neural network
- Computer program for prediction steel parameters after heat treatment
- Material science virtual laboratory as an example of the computer aid in material engineering
- Computer aided method for quality control of automotive Al-Si-Cu cast components
- Microstructure and mechanical properties of AC AlSi9CuX alloys
- Functional properties of surface layers of X38CrMoV5-3 hot work tool steel using HPDL laser
- The computer simulation of stresses in the Ti+Ti(CxN1-x) coatings obtained in the PVD process
- Structure and properties of gradient tool materials with the high-speed steel matrix
- Structure of multicomponent and gradient PVD coatings on SiAlON
- Comparison of the thermal fatigue surface layers of the X40CrMoV-1 hot work tool steel laser alloyed
- Structure and properties of HS6-5-2 type HSS manufactured by different P/M methods
- Comparison of the PVD coatings deposited onto hot work tool steel and brass substrates
- Influence of heat treatment on corrosion resistance of PM composite materials
- Self reinforced polymer-polymer composites
- Fracture analysis of selected magnesium alloys after different testing methods
- Application of laser in multicrystalline silicon surface processing
- Quality management in university education
- Magnetic properties of hot pressed powder Co68Fe4Mo1Si13.5B13.5 alloy
- Fractal and multifractal characteristics of PVD coatings
• 12th International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S'2006, 27-30.11.2006, Gliwice – Zakopane:
- Optimisation of the rivet joints of the CFRP composite material and aluminium alloy
- Improvement of the hot work tool steel surface layers properties using a high power diode laser
- Evaluation of chemical composition effect on materials properties using AI methods
- Methodology of automatic quality control of aluminium casting
- Crystallisation mechanism of laser alloyed gradient layer on tool steel
- Modelling of gradient layer properties of the 32CrMoV12-27 surface layer alloyed with WC powder
- Improvement of the hot work tool steel surface layers properties using a high power diode laser
- Mechanical and tribological properties of the laser alloyed surface coatings
- Influence of temperature on structure and magnetic properties of powders alloys
- New possibilities of application of composite materials with soft magnetic properties
- Structure of multicomponent and gradient PVD coatings deposited on sintered tool materials
- Corrosion of Nd-Fe-B permanent magnets
- Properties of a Nb-V-Ti microalloyed steel influenced by cold rolling and annealing
- Structure and properties of TGM manufactured on the basis of cobalt
- Modelling of mechanical properties of Al-Si-Cu cast alloys using the neural network
- Influence of sintering parameters on the properties of duplex stainless steel
- Composite materials based on porous ceramic preform infiltrated by aluminium alloy
- Sinter-hardening of Ni-Mo pre-alloyed powders with tungsten addition
- Mechanical properties of monolayer coatings deposited by PVD techniques
- Analysis of influence of chemical composition of Al-Si-Cu casting alloy on formation of casting defects
- Application of neural networks to classification of internal damages in steels working in creep service
- Fractal and multifractal characteristics of CVD coatings deposited onto the nitride tool ceramics
- Heat treatment impact on the structure of die-cast magnesium alloys
- Structure of laser treated multicrystalline silicon wafers
- Development of the virtual light microscope for material science virtual laboratory
- The computer simulation of internal stresses in coatings obtained by the PVD process
- Project of computer program for designing the steel with the assumed CCT diagram
- Effect of WC concentration on structure and properties of the gradient tool materials
- Structure and magnetic properties of powder soft magnetic materials
- Comparison of the adhesion and wear resistance of the PVD coatings
- Influence of heat treatment on properties and corrosion resistance of Al-composite
• 47. Międzynarodowa Konferencja Naukowa „Krzepnięcie i Krystalizacja Metali 2006”, 26-28.09.2006, Sielpia, Kielce:
- Zastosowanie metod sztucznej inteligencji do klasyfikacji wad w odlewach ze stopów Al-Si-Cu
- Zastosowanie sieci neuronowych do modelowania temperatury solidus podeutektycznych stopów Al-Si-Cu
- Mikrostruktura i własności mechaniczne odlewniczych stopów magnezu Mg-Al
• 14th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME`2006, 4-7.06.2006, Gliwice – Wisła:
- Laser powder surfacing of the Si-Mo spheroidal cast iron with nickel powder
- Influence of cold rolling and annealing on mechanical properties of steel QStE 420
- Cutting ability improvement of coated tool materials
- Mechanical properties of magnesium alloy AZ91 at elevated temperatures
- Influence of the crystallization condition on Al-Si-Cu casting alloys structure
- Structure and tribological behavior of surface layer of laser modified X40CrMoV5-1 steel
- Effect of carbon concentration on structure and properties of the gradient tool materials
- Fabrication of ceramic preforms based on Al2O3 Cl 2500 powder
- Structure of monolayer coatings deposited by PVD techniques
- Structure and corrosion resistance of gradient and multilayer coatings
- Influence of Al addition on structure of magnesium casting alloys
- Wear phenomena of spinning rolls for stone wool production
- Structure and properties of functionally gradient tool materials manufactured on the basis of high speed-steel HS6-5-2 type reinforced by WC, VC or HS12-1-5-5 high speed-steel powder
- Selection method of steel grade with required hardenability
- Functional properties of laser modified surface of tool steel
- Processing of silicon surface by Nd:YAG laser
- Mechanical properties and structure changes of the laser alloyed 32CrMoV12-20 steel
- The effect of cast Al-Si-Cu alloy solidification rate on alloy thermal characteristics
- Influence Zr and Ce on the structure of experimental hot-work tool steel
- Simulation of the microhardness measurement of PVD coatings by use of FEM
- The computer simulation of stresses in the Ti+TiC coatings obtained in the PVD process
- Comparison of electrical characteristic of silicon solar cells
- The structure and properties of chosen metals after ECAP
- Methodology of analysis of casting defects
- Materials with specific magnetic properties
- Mechanical properties and the structure of magnetic composite materials
- Structure and properties of the powder obtained from the amorphous ribbon
- Application of artificial intelligence method for evaluation of chemical composition effect on materials properties
- An artificial intelligence approach in designing new materials
- Corrosion resistance of sintered duplex stainless steel evaluated by electrochemical method
- Application of interactive course management system in distance learning of material science
- Microstructural characteristic and mechanical properties of Ni-Mo-(W) steels
- Structure and properties of surface layers obtained by alloying of the hot work tool steels
- Robotized GMA surfacing of cermetalic layers
- Fractal and multifractal characteristics of coatings deposited on pure oxide ceramics
• 11th International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S'2005, 6-9.12.2005, Gliwice – Zakopane:
- Mechanical properties of metallic ribbons based on cobalt by depth sensing indentation technique
- Laser modification of surface layer properties of a hot-work tool steel
- Corrosion resistance of sintered duplex stainless steels in the salt fog spray test
- TiN+gradient or multi(Ti,Al,Si)N+TiN coatings deposited on cermets by CAE process: characteristic of structure and properties
- Mechanical and microstructural properties of Ni-Mo and Ni-Mo-W sintered steels
- FEM application for modeling of critical compressive stresses located on the edges of PVD coatings
- Multifractal characterization of PVD and CVD coatings obtained onto the Al2O3+TiC substrate
- Morphology diversity of injection moulded polymer composites
- Filament winding of thermoplastic composites
- On the identification of composite beam dynamics based upon experimental data
- Effect of manufacturing methods on structure and properties of the gradient tool materials with the non-alloy matrix reinforced with the HS6-5-2 type high-speed steel
- Corrosion resistance of coatings deposited by PVD and CVD techniques
- Characterisation of the CrN, TiN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrided hot work tool steel
- Residual macro-stresses of PVD and CVD coatings deposited on tool ceramics substrates, measured with the application of the grazing angle X-ray diffraction geometry
- Properties and corrosion resistance of PM composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the Ti(C,N) particles
- Comparison of structure and properties of HS6-5-2 type high-speed steel fabricated by different powder forming methods
- Application of neural networks for selection of steel with the assumed hardness after cooling from the austenitising temperature
- Comparison of the abrasion wear resistance of the X40CrMoV5-1 and 55NiCrMoV7 hot work tool steel with their surface layer enriched with the ceramic powders
- Laser alloying and its effects on microstructure and properties of hot work tool steel
- Effect of laser treatment on changes of the surface layers properties of the hot work alloy tool steels
- Mechanical properties and microstructure of Mg-Al alloys after forming
- Modeling of surface layer of the 32CrMoV12-28 tool steel using HPDL laser for alloying with TiC powder
- Mechanical properties of multilayer coatings deposited by PVD techniques onto the brass substrate
- Permanent magnets Nd-Fe-B
- The use of artificial intelligence methods for the identification of casting defects
- Application of artificial neural networks for calculation of the solidus temperature for hypoeutectic aluminum silicon alloys
- Influence of heat treatment on structure and property of the casting magnesium alloys
- Methodical foundations of optimization of technological processes on basis of technological efficiency analysis
- Manufacturing technology of the composite materials: nanocrystalline material – polymer type
• Worldwide Congress on Materials and Manufacturing Engineering and Technology COMMENT’2005 (including: 8th International Conference on Advances in Materials and Processing Technologies AMPT'2005, 13th International Scientific Conference on Achievements of Mechanical and Materials Engineering AMME'2005, 7th International Conference on Computer Integrated Manufacturing – Intelligent Manufacturing Systems CIM'2005, 10th Jubilee Countrywide Conference on Contemporary Achievements in Materials Science CAMS'2005, International Scientific Conference on Environmental Friendly Technologies ENT'2005, 46th International Scientific Conference on Foundry – Solidification and Crystallisation of Metals FOUND'2005, 3rd Scientific Conference on Materials, Mechanical and Manufacturing Engineering MMME'2005), 16-19.05.2005, Gliwice – Wisła:
- Methodology of the mechanical properties prediction for the metallurgical products from the engineering steels using the Artificial Intelligence methods (keynote lecture)
- Design criteria used for optimization of the solution treatment for 3xxx series cast alloys (keynote lecture)
- Comparison of the structures of the hot-work tool steels laser modified surface layers
- Properties of vacuum sintered duplex stainless steels
- Structure, properties and corrosion resistance of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the Al2O3 ceramic particles
- Soft magnetic nanocomposite with powdered metallic ribbon based on cobalt and polymer matrix
- Comparison of structure and properties of the HS12-1-5-5 type high-speed steel fabricated using the pressureless forming and PIM methods
- Mathematical modeling for ECAP technology of multiple forming
- Structure and properties of the composite materials consisting of the nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloy powders and polyethylene
- Employment of the Finite Element Method for determining stresses in coatings obtained on high speed steel with the PVD process
- Structure, physical properties and fractal character of surface topography of the Ti+TiC coatings on sintered high speed steel
- Application of genetic methods in materials’ design
- Cutting properties of the Al2O3+SiC(w) based tool ceramic reinforced with the PVD and CVD wear-resistant coatings
- Application of neural networks for designing the chemical composition of steel with the assumed hardness after cooling from the austenitising temperapture
- Structure and properties of the cutting tools made from cemented carbides and cermets with the TiN+mono, gradient or multi (Ti,Al,Si)N+TiN nanocrystalline coatings
- Corrosion resistance of multilayer coatings deposited by PVD techniques onto the brass substrate
- Structure and properties of PVD and CVD coated Al2O3+TiC mixed oxide tool ceramics for dry on high speed cutting processes
- Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B
- Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel
- Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramics
- Abrasion resistance of GMA metal cored wires surfaced deposits
- Structure characteristics after rolling of magnesium alloys
- Laser treatment of surface layer over choosen hot work tool steels
- Laser texturisation of crystalline silicon for solar cells
- Effect of laser treatment on changes of the surface layers properties of the hot work alloy tool steels
- Employment of the artificial neural networks for prediction of the mechanical properties of constructional steels
- Influence of modification with chemical elements on structure of magnesium casting alloys
- Computer assisted classification of flaws identified with the radiographical methods in castings from the aluminium alloys
- Applications of the derivation analysis for assessment of the ACAlSi7Cu alloy crystallization process cooled with different cooling rate
- Microstructure investigations and hardness measurement in Al-Ti alloy with additions of Ce after heat treatment
- Characteristics of the surface layer of X40CrMoV5-1 hot work tool alloy steel hardened by means of high power diode laser
- Materials design as a main goal of materials
- Corrosion resistance of sintered duplex stainless steels
- Hard magnetic composite materials Nd-Fe-B with addition of powder of iron ad high alloy steel X2CrNiMo17-1-2-2
- Significance of addition of aluminum or CuSn10 casting alloy of cooper with tin in hard magnetic composite materials Nd-Fe-B with polymer matrix covered by protective coatings
- Structure and properties of the compound coatings type TiN+gradient or multi (Ti,Al,Si)N +TiN deposited on cermet tool materials
- Mechanism of laser wire surfacing process
- Application of the methods of artificial intelligence for prediction of properties of metallurgical products made of constructional steels
- Composite materials based on porous ceramic Al2O3 infiltrated by EN AC-AlSi12 alloy
- Structure and properties of the anti-wear and corrosion resistant multilayer coatings deposited by PVD technique onto the brass substrate
- Structure and properties of sintered high speed-steel HS6-5-2 type formed by injection moulding
- 47CrMoWVTiCeZr16-26-8 hot-work tool steel
- Structure and properties of the Al2O3+TiC oxide ceramic tools with PVD or CVD coatings used for high speed machining without cooling
- Laser surface treatment of selected hot work tool steels
- Structure and properties of PVD coatings deposited on nitrided X37CrMoV5-1 hot work tool steel
- Computer aided classification of damage of steel working in creep conditions
- Computer simulation of internal stress status in wear resisting PVD coatings deposited on sintered high speed steels
- Corrosion resistance of the sintered composite materials with the EN AW-AlCu4Mg1(A) alloy matrix reinforced with Al2O3 and Ti(C,N)
- GTA and plasma GTA welding technology of thin sheets of titanium alloy TiAl6V4
- Effect of the PVD process conditions on properties and fractal character of the surface topography of the two-layer coatings on the sintered high-speed steel substrate
- Wear resisting PVD and CVD coatings deposited on the Si3N4 ceramic tools
- Computer aided materials selection for machine parts
- Modelling of transformations occuring during quenching in engineering steels
• XVII Physical Metallurgy and Materials Science Conference Advanced Materials and Technologies, AMT'2004, 20-24.06.2004, Łódź:
- Employment of neural networks for analysis of chemical composition and cooling rate effect on CCT diagrams shape
- Computer simulation of the influence of the alloying elements on secondary hardness of the high-speed steels
- Structure and properties of surface layers obtained by laser treatment of the hot-work tool steel
- Structure and properties of the wear resistant coatings obtained in the PVD and CVD processes on tool ceramics
- Deposition conditions effect on physical properties and surface topography fractal dimension of the Ti+Ti(CxN1-x) coatings obtained in the PVD process
- Employment of neural networks for modelling of corrosive wear of hard magnetic composite materials
• 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME`2003, 7-10.12.2003, Gliwice – Zakopane:
- The PM route for duplex stainless steels
- Study of selected properties of magnesium alloy AZ91 after heat treatment and forming
- Employment of a high power diode laser for alloying the X40CrMoV5-1 steel surface layer with tungsten carbide
- Analysis of the Al-Si alloy structure development using thermal analysis and rapid quenching techniques
- Properties of the mono-layer ceramic coatings deposited by PVD process
- Injection Moulding of HS12-1-5-5 high-speed using a PW-HDPE based binder
- Determination of the reduced stress and deformation that had occurred in the sample under thermal fatigue testing of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel
- Cutting properties of the ceramic tool materials based on Si3N4 and Al2O3 coated with PVD and CVD Process
- Tribological properties of the PVD and CVD coatings put down onto the nitride tool ceramics
- Structure and properties of aluminium alloys reinforced with the Al2O3 particles
- Materials for solar cells-state of the art and perspectives
- Fractal nature of surface topography and physical properties of the TiN coatings obtained in the PVD process
- Structure and properties of the Fe73,5Cu1Nb3Si13,5B9 alloy powders bound with polyethylene
• 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME`2002, 15-18.12.2002, Gliwice – Zakopane:
- Structure and properties of AA6061/(Ti3Al)p composite materials obtained by mechanical milling and hot extrusion
- Tribological properties of the surface layer of the X40CrMoV5-1 steel remelted using the high power diode laser (HPDL)
- The effect of deposition of the anti-wear coatings of the TiN+TiAlSiN+TiN type on working properties of tool cermets
- The effect of the solidification shrinkage and heat treatment process on the structural damage of the interface between the 319 alloy and cast iron
- Effect of the substrate bias on structure and properties of the Ti+Ti(C,N) coatings obtained in the PVD process
- Structure of the PVD coatings deposited using the reactive magnetron sputtering method
- Structure and properties of high speed steels formed from powders
- Characteristics of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel
- Application of neural networks for forecasting the CCT curves for constructional steels
• 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engi-neering, AMME`2001, 9-13.12.2001, Gliwice – Kraków – Zakopane:
- PM AA6061/(Ti3Al)p composite powder obtained by mechanical milling
- Wear of PVD coated solid carbide and mills in dry high-speed cutting (HSC)
- Precipitation processes occurring during heat treatment of the newly developed Al-Mg-Cu-Zn alloy for car chassis