417. L.A. Dobrzański, Ł. Reimann, M. Kujawa, B. Tomiczek: Corrosion behaviour of aluminium matrix composites reinforced with sintered halloysite nanotubes, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 73, 2015, Issue 2, pp. 92-99
418. E. Jonda, K. Labisz, L.A. Dobrzański: Microstructure and properties of the hot work tool steel gradient surface layer obtained using laser alloying with tungsten carbide ceramic powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 73, 2015, Issue 2, pp. 214-221
419. L.A. Dobrzański, M. Prokopiuk vel Prokopowicz, K. Lukaszkowicz, A. Drygała, M. Szindler: Graphene oxide film as semi-transparent counter electrode for dye-sensitized solar cell, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 73, 2015, Issue 1, pp. 13-20
420. L.A. Dobrzański, B. Nieradka-Buczek: Obtaining copper nanoparticles from nanocomposites of poly(vinyl alcohol) matrix, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 72, 2015, Issue 2, pp. 85-92
421. L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, T.G. Gaweł: Ti6Al4V porous elements coated by polymeric surface layer for biomedical applications, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 71, 2015, Issue 2, pp. 53-59
422. L.A. Dobrzański, W. Borek, J. Mazurkiewicz: TWIP mechanism in processing of high-manganese austenitic steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 71, 2015, Issue 1, pp. 22-27
423. L.A. Dobrzański, J. Trzaska, M. Gawron, M. Berliński: The use of artificial neural networks for the prediction of sulphur content in hot metal produced in blast furnace, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 70, 2015, Issue 2, pp. 86-92
424. E. Jonda, K. Labisz, L.A. Dobrzański, Ł. Siomin: Evaluation of microstructure and chosen properties of zinc and its alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 70, 2015, Issue 1, pp. 22-28
425. L.A. Dobrzański, M.M. Szindler, M. Szindler, A. Dudek, K. Krawiec: The influence of natural and synthetic dyes on the absorbance of nanocrystalline TiO2 used in dye sensitized solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 69, 2015, Issue 2, pp. 53-58
426. A.J. Nowak, L.A. Dobrzański: Wear abrasive resistance of intracorporeal prosthesis of oesophagus, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 69, 2015, Issue 1, pp. 26-32
427. B. Tomiczek, L.A. Dobrzański, M. Adamiak, K. Labisz: Effect of milling conditions on microstructure and properties of AA6061/halloysite composites, Procedia Manufacturing, Vol. 2, 2015, pp. 402-407
428. L.A. Dobrzański, M. Adamiak, M. Karoń, B. Nieradka: Influence of inorganic additives on morphology of electrospun fibres, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 68, 2015, Issue 2, pp. 64-71
429. L.A. Dobrzański, M. Szindler, M. Prokopiuk vel Prokopowicz, A. Drygała, K. Lukaszkowicz, T. Jung, M.M. Szindler: Transparent platinum counter electrode for dye-sensitized solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 68, 2015, Issue 1, pp. 5-10
430. R. Honysz, L.A. Dobrzański: Optimization of chemical composition and heat treatment condition of structural steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 64, 2014, Issue 1, pp. 27-33
431. L.A. Dobrzański, M. Musztyfaga-Staszuk, A. Łuckoś: The comparison of computer methods for porosity evaluation in sintered constructional steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 61, 2013, Issue 2, pp. 395-402
432. R. Honysz, L.A. Dobrzański: Influence analysis of admixtures on mechanical properties of non-alloy structural steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 61, 2013, Issue 2, pp. 336-342
433. A. Hudecki, M. Pawlyta, L.A. Dobrzański G. Chladek: Micro and ceramic nanoparticles surface properties examination with gas adsorption method and microscopic transmission, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 61, 2013, Issue 2, pp. 257-262
434. J. Konieczny, I. Czaja, L.A. Dobrzański: Microstructural characterisation of sintered soft magnetic nanocomposite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 61, 2013, Issue 2, pp. 202-209
435. L.A. Dobrzański, M. Czaja, W. Borek, K. Labisz: Influence of thermo-plastic deformation on grain size of high-manganese austenitic X11MnSiAl17-3-1 steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 61, 2013, Issue 2, pp. 169-174
436. T. Tański, M. Król, L.A. Dobrzański, S. Malara, J. Domagała-Dubiel: Precipitation evolution and surface modification of magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 61, 2013, Issue 2, pp. 97-149
437. B. Tomiczek, L.A. Dobrzański: Composite materials based on AlMg1SiCu aluminium alloy reinforced with halloysite particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 61, 2013, Issue 1, pp. 39-46
438. L.A. Dobrzański, A. Achtelik-Franczak, M. Król: Computer aided design in Selective Laser Sintering (SLS) – application in medicine, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 60, 2013, Issue 2, pp. 66-75
439. L.A. Dobrzański, M. Szczęsna, M. Szindler, A. Drygała: Electrical properties mono- and polycrystalline silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 59, 2013, Issue 2, pp. 67-74
440. L.A. Dobrzański, M. Szindler: Al2O3 antireflection coatings for silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 59, 2013, Issue 1, pp. 13-19
441. Ł. Reimann, L.A. Dobrzański, B. Nieradka, M. Kusy, R. Riedlmajer: Influence the heat treatment of two base metal alloys used on dental prosthesis on corrosion resistance, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 57, 2013, Issue 2, pp. 83-90
442. L.A. Dobrzański, M. Król: Structure and properties investigation of MCMgAl12Zn1 magnesium alloy, Archives of Foundry Engineering, Vol. 13, 2013, Issue 1, pp. 9-14
443. L.A. Dobrzański, B. Tomiczek, M. Adamiak, K. Gołombek: Mechanically milled aluminium matrix composites reinforced with halloysite nanotubes, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 654-660
444. L.A. Dobrzański, M. Bilewicz: Influence of phyllosilicates 2:1 on structure of polymer nanocomposite, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 644-653
445. G.F. Batalha, A. Farias, R. Magnabosco, S. Delijaicov, M. Adamiak, L.A. Dobrzański: Evaluation of an AlCrN coated FSW tool, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 607-615
446. G. Matula, L.A. Dobrzański, M. Ambroziak: Simulation of powder injection moulding conditions using cadmould program, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 556-560
447. L.A. Dobrzański, Ł. Reimann: Digitization procedure of creating 3D model of dental bridgework reconstruction, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 469-476
448. L.A. Dobrzański, R. Honysz: Heat treatment influence on mechanical properties of structural steels for quenching and tempering, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 461-468
449. L.A. Dobrzański, A.E. Tomiczek, A.W. Pacyna: Properties of the magnetostrictive composite materials with the polyurethane matrix reinforced with Terfenol-D particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 316-322
450. L.A. Dobrzański, M. Musztyfaga, M. Giedroć, P. Panek: Investigation of various properties of monocrystalline silicon solar cell, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 307-315
451. L.A. Dobrzański, M. Górniak, Ł. Reimann, M. Staszuk: Characterization of aluminosilicate nanoparticles as a reinforcement in composite materials based on polymeric matrix, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 239-244
452. L.A. Dobrzański, W. Borek: Mechanical properties and microstructure of high-manganese TWIP, TRIP and TRIPLEX type steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55, 2012, Issue 2, pp. 230-238
453. L.A. Dobrzański, W. Borek, M. Ondrula: Thermo-mechanical processing and microstructure evolution of high-manganese austenitic TRIP-type steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 53, 2012, Issue 2, pp. 59-66
454. L.A. Dobrzański, A. Drygała, M. Giedroć, M. Macek: Monocrystalline silicon solar cells applied in photovoltaic system, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 53, 2012, Issue 1, pp. 7-13
455. L.A. Dobrzański, M. Szindler: Sol gel TiO2 antireflection coatings for silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 52, 2012, Issue 1, pp. 7-14
456. A. Włodarczyk-Fligier, L.A. Dobrzański, J. Konieczny: Structure of EN AW-Al Cu4Mg1(A) composite materials reinforced with the Ti(C,N) ceramic particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 51, 2012, Issue 1, pp. 22-29
457. L.A. Dobrzański, M. Pawlyta, A. Hudecki: Conceptual study on a new generation of the high-innovative advanced porous and composite nanostructural functional materials with nanofibers, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 49, 2011, Issue 2, pp. 550-565
458. L.A. Dobrzański: Report on the main areas of the materials science and surface engineering own research, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 49, 2011, Issue 2, pp. 514-549
459. A. Śliwa, L.A. Dobrzański, W. Kwaśny, M. Tisza, L. Toth, S. Szabolcs, S. Pudmer: Innovative method of properties determination for tools covered with PVD coatings using computer simulation, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 49, 2011, Issue 2, pp. 375-382
460. L.A. Dobrzański, L.W. Żukowska, A. Śliwa, J. Mikuła: FEM modelling of internal stresses in advanced PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 49, 2011, Issue 2, pp. 259-268
461. L.A. Dobrzański, R. Honysz: Virtual examinations of alloying elements influence on alloy structural steels mechanical properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 49, 2011, Issue 2, pp. 251-258
462. L.A. Dobrzański, Ł. Reimann: Influence of Cr and Co on hardness and corrosion resistance CoCrMo alloys used on dentures, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 49, 2011, Issue 2, pp. 193-199
463. L.A. Dobrzański, M. Staszuk: Surface modification of sialon ceramics and cemented carbides by PVD coating deposition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 49, 2011, Issue 2, pp. 158-165
464. L.A. Dobrzański, B. Tomiczek, M. Adamiak: Manufacturing of EN AW6061 matrix composites reinforced by halloysite nanotubes, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 49, 2011, Issue 1, pp. 82-89
465. L.A. Dobrzański, M. Musztyfaga: Effect of the front electrode metallisation process on electrical parameters of a silicon solar cell, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 48, 2011, Issue 2, pp. 115-144
466. K. Labisz, L.A. Dobrzański, R. Maniara, A. Olsen: Microstructure evaluation of the Al-Ti alloy with magnesium addition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 47, 2011, Issue 1, pp. 75-82
467. Z. Brytan, L.A. Dobrzański, W. Pakieła: Laser surface alloying of sintered stainless steels with SiC powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 47, 2011, Issue 1, pp. 42-56
468. E. Tillová, M. Chalupová, L. Hurtalová, M. Bonek, L.A. Dobrzański: Structural analysis of heat treated automotive cast alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 47, 2011, Issue 1, pp. 19-25
469. L.A. Dobrzański, M. Król: Thermal and structure analysis of the MA MgAl6Zn3 magnesium alloy, Journal of Achie-vements in Materials and Manufacturing Engineering, Vol. 46, 2011, Issue 2, pp. 189-195
470. L.A. Dobrzański, M. Kremzer, J. Konieczny: The influence of Ni-P layer deposited onto Al2O3 on structure and properties of Al-Al2O3 composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 46, 2011, Issue 2, pp. 147-153
471. L.A. Dobrzański, W Borek: Hot deformation and recrystallization of advanced high-manganese austenitic TWIP steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 46, 2011, Issue 1, pp. 71-78
472. L.A. Dobrzański, A.J. Nowak, W. Błażejewski, R. Rybczyński: The concept of preparation of oesophageal prosthesis based on long-fibre composite material, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 46, 2011, Issue 1, pp. 18-24
473. L.A. Dobrzański, M. Krupiński, K. Labisz, Z. Rdzawski: Influence of thermo-derivative analysis conditions on microstructure of the Al-Si-Cu alloy, Archives of Foundry Engineering, Vol. 11, 2011, Special Issue 2, pp. 19-22
474. L.A. Dobrzański, M. Musztyfaga, A. Drygała, W. Kwaśny, P. Panek: Structure and electrical properties of screen printed contacts on silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 45, 2011, Issue 2, pp. 141-147
475. L.A. Dobrzański, A.J. Nowak, A. Pusz, M. Górniak: The preparation of aramid fibres in silicone based composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 45, 2011, Issue 2, pp. 125-131
476. L.A. Dobrzański, L.W. Żukowska: Structure and properties of gradient PVD coatings deposited on the sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 44, 2011, Issue 2, pp. 115-139 & Open Access Library, Vol. 1, 2011, pp. 187-234
477. T. Tański, K. Labisz, L.A. Dobrzański: Effect of Al additions and heat treatment on corrosion properties of Mg-Al based alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 44, 2011, Issue 1, pp. 64-72
478. L.A. Dobrzański, M. Hetmańczyk, E. Łągiewka: Current state and development perspectives of Materials Science and Engineering in Poland, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 782-789
479. L.A. Dobrzański, B. Dołżańska: Structure and properties of sintered tool gradient materials, Journal of Achie-vements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 711-733 & Open Access Library, Vol. 1, 2011, pp. 89-132
480. A. Śliwa, L.A. Dobrzański, W. Kwaśny, M. Staszuk: Simulation of the microhardness and internal stresses measurement of PVD coatings by use of FEM, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 684-691 & Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 4, pp. 213-220
481. L.A. Dobrzański, M. Król, T. Tański: Effect of cooling rate and aluminum contents on the Mg Al-Zn alloys’ structure and mechanical properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 613-633 & Open Access Library, Vol. 1, 2011, pp. 9-54
482. L.A. Dobrzański, M. Staszuk: PVD and CVD gradient coatings on sintered carbides and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 552-576 & Open Access Library, Vol. 1, 2011, pp. 133-186
483. L.A. Dobrzański, A. Tomiczek, A. Nabiałek, R. Żuberek: Structure and magnetic properties of magnetostrictive Tb0.3Dy0.7Fe1.9 / polyurethane composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 527-532
484. L.A. Dobrzański, W. Borek: Hot-working of advanced high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 2010, Issue 2, pp. 507-526 & Open Access Library, Vol. 1, 2011, pp. 55-88
485. L.A. Dobrzański, R. Honysz: The idea of material science virtual laboratory, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 196-203
486. M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak: Comparison of the PVD coatings deposited onto plasma nitrited steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 172-179
487. K. Lukaszkowicz, L.A. Dobrzański, W. Kwaśny, K. Labisz, M. Pancielejko: Microstructure and mechanical properties of nanocomposite coatings deposited by cathodic arc evaporation, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 156-163
488. L.A. Dobrzański, M. Staszuk, M. Pawlyta, J. Konieczny: The investigations of (Ti,Al)N and (Al,Ti)N coatings obtained by PVD process onto sintered cutting tools, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 148-155
489. L.A. Dobrzański, E. Jonda, K. Labisz, M. Bonek, A. Klimpel: The comparision of tribological properties of the surface layer of the hot work tool steels obtained by laser alloying, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 142-147
490. L.A. Dobrzański, A. Pusz, A.J. Nowak, M. Górniak: Application of FEM for solving various issues in material engineering, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 134-141
491. A. Włodarczyk-Fligier, M. Adamiak, L.A. Dobrzański: Corrosion resistance of the sintered composite materials with the EN AW-AlCu4Mg1(a) alloy matrix reinforced with ceramic particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 120-126
492. L.A. Dobrzański, M. Musztyfaga, A. Drygała: Selective laser sintering method of manufacturing front electrode of silicon solar cell, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 111-119
493. T. Tański, L.A. Dobrzański, K. Labisz: Investigations of microstructure and dislocations of cast magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 94-102
494. M. Krupiński, K. Labisz, L.A. Dobrzański, Z. Rdzawski: Image analysis used for aluminium alloy microstructure investigation, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 58-65
495. B. Krupińska, K. Labisz, L.A. Dobrzański, Z. Rdzawski: Crystallization kinetics of Zn alloys modified with Ce, La, Sr, Ti, B, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 50-57
496. J. Konieczny, A. Borisjuk, M. Pashechko, L.A. Dobrzański: Magnetic properties of Co-based amorphous ribbon under cyclic heating and cooling, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 42-49
497. L.A. Dobrzański, A. Śliwa, L.W. Żukowska, J. Mikuła, K. Gołombek: Structure and mechanical properties of PVD coatings for tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 33-41
498. L.A. Dobrzański, M. Kremzer, M. Adamiak: The influence of reinforcement shape on wear behaviour of aluminium matrix composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42, 2010, Issues 1-2, pp. 26-32
499. L.A. Dobrzański, M. Król, T. Tański: Influence of cooling rate on crystallization, structure and mechanical properties of MCMgAl6Zn1 alloy, Archives of Foundry Engineering, Vol. 10, 2010, Issue 3, pp. 105-110
500. A. Śliwa, M. Matula, L.A. Dobrzański: Finite Element Method application for structure determining of powder injection moulding samples, Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 3, pp. 157-164
501. L.A. Dobrzański, M. Król, T. Tański: Application a neural networks in crystallization process of Mg-Al-Zn alloys, Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 3, pp. 149-156
502. L.A. Dobrzański, M. Staszuk, R. Honysz: Application of artificial neural networks in properties modelling of PVD and CVD coatings, Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 3, pp. 141-148
503. M. Polok-Rubiniec, K. Lukaszkowicz, L.A. Dobrzański: Comparison of nanostructure and duplex PVD coatings deposited onto hot work tool steel substrate, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41, 2010, Issues 1-2, pp. 187-194
504. A. Śliwa, J. Mikuła, L.A. Dobrzański: FEM application for modelling of PVD coatings properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41, 2010, Issues 1-2, pp. 164-171
505. L.A. Dobrzański, M. Staszuk, K. Gołombek, M. Pancielejko: Properties of Ti(B,N) coatings deposited onto cemented carbides and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41, 2010, Issues 1-2, pp. 66-73
506. L.A. Dobrzański, M. Musztyfaga, A. Drygała, P. Panek: Investigation of the screen printed contacts of silicon solar cells using Transmission Line Model, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41, 2010, Issues 1-2, pp. 57-65
507. L.A. Dobrzański, M. Król, T. Tański: Thermal analysis, structure and mechanical properties of the MC MgAl3Zn1 cast alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010, Issue 2, pp. 167-174
508. Z. Brytan, M. Bonek, L.A. Dobrzański: Microstructure and properties of laser surface alloyed PM austenitic stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010, Issue 1, pp. 70-78
509. L.A. Dobrzański, R. Honysz: Application of artificial neural networks in modelling of quenched and tempered structural steels mechanical properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010, Issue 1, pp. 50-57
510. L.A. Dobrzański, W. Borek: Microstructure forming processes of the 26Mn-3Si-3Al-Nb-Ti steel during hot-working conditions, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40, 2010, Issue 1, pp. 25-32
511. L.A. Dobrzański, M. Pawlyta, A. Krztoń, B. Liszka, K. Labisz: Synthesis and characterization of carbon nanotubes decorated with platinum nanoparticles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 39, 2010, Issue 2, pp. 184-189
512. K. Labisz, L.A. Dobrzański, E. Jonda, J. Lelątko: Comparison of surface laser alloying of chosen tool steel using Al2O3 and ZrO2 powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 39, 2010, Issue 1, pp. 87-94
513. M. Krupiński, K. Labisz, L.A. Dobrzański, Z. Rdzawski: Derivative thermo analysis of the Al Si cast alloy with addition of rare earths metals, Archives of Foundry Engineering, Vol. 10, 2010, Issue 1, pp. 79-82
514. L.A. Dobrzański, M. Król: Thermal and mechanical characteristics of cast Mg-Al-Zn alloy, Archives of Foundry Engineering, Vol. 10, 2010, Issue 1, pp. 27-30
515. M. Krupiński, K. Labisz, L.A. Dobrzański, Z.M. Rdzawski: Derivative thermo-analysis application to assess the cooling rate influence on the microstructure of Al-Si alloy cast, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 38, 2010, Issue 2, pp. 115-122
516. T. Tański, L.A. Dobrzański, R. Maniara: Microstructures of Mg-Al-Zn and Al-Si-Cu cast alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 38, 2010, Issue 1, pp. 64-71
517. L.A. Dobrzański, M. Musztyfaga: Effect of cooling rates on sinter-hardened steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 630-638
518. L.A. Dobrzański, K. Labisz, R. Maniara, A. Olsen: Microstructure and mechanical properties of the Al-Ti alloy with cerium addition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 622-629
519. L.A. Dobrzański, E. Jonda, K. Labisz: Structure and properties of surface layer of hot-work tool steels alloyed using high power diode laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 617-621
520. L.A. Dobrzański, A. Drygała, A. Januszka: Formation of photovoltaic modules based on polycrystalline solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 607-616
521. M. Bilewicz, L.A. Dobrzański, J.C. Viana: Morphological aspect of multilaminar PP composite, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 598-606
522. A. Śliwa, M. Matula, L.A. Dobrzański: Finite Element Method application for determining feedstock distribution during powder injection moulding, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 584-591
523. L.A. Dobrzański, M. Król: Application of the neural network for Mg-Al-Zn mechanical properties modelling, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 549-555 & Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 4, pp. 181-188
524. J. Weszka, L.A. Dobrzański, P. Jarka, J. Jurusik, B. Hajduk, M. Bruma, J. Konieczny, D. Mańkowski: Studying of spin-coated oxad-Si properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 505-511
525. L.A. Dobrzański, A. Pusz, A.J. Nowak: The effect of micropores on output properties of laminate materials with assumed medical implantation, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 408-415
526. L.A. Dobrzański, W. Borek: Processes forming the microstructure evolution of high-manganese austenitic steel in hot-working conditions, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 397-407
527. Z. Brytan, L.A. Dobrzański, M. Actis Grande, M. Rosso: The influence of sintering time on the properties of PM duplex stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 387-396
528. K. Labisz, M. Krupiński, L.A. Dobrzański: Phases morphology and distribution of the Al-Si-Cu alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 309-316
529. L.A. Dobrzański, T. Tański, J. Domagała, S. Malara, M. Król: Effect of high power diode laser surface melting and cooling rate on microstructure and properties of magnesium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 238-257 & Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 1, pp. 24-43
530. L.A. Dobrzański, A. Kloc-Ptaszna: Structure and properties of the gradient tool materials based on a high-speed steel HS6-5-2 reinforced with WC or VC carbides, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 2, pp. 213-237
531. L.A. Dobrzański, S. Malara, T. Tański: Laser surface treatment of magnesium alloys with aluminium oxide powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 70-77
532. L.A. Dobrzański, M. Król, T. Tański, R. Maniara: Effect of cooling rate on the solidification behaviour of MC MgAl6Zn1 alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 65-69
533. L.A. Dobrzański, J. Domagała-Dubiel, K. Labisz, E. Hajduczek, A. Klimpel: Effect of laser treatment on microstructure and properties of cast magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 57-64
534. L.A. Dobrzański, M. Staszuk, A. Křiž, K. Lukaszkowicz: Structure and mechanical properties of PVD gradient coatings deposited onto tool steels and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 36-43
535. L.A. Dobrzański, M. Musztyfaga: Influence of cooling rates on properties of pre-alloyed PM materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 28-35
536. L.A. Dobrzański, A. Tomiczek, B. Tomiczek, A. Ślawska-Waniewska, O. Iesenchuk: Polymer matrix composite materials reinforced by Tb0.3Dy0.7Fe1.9 magnetostrictive particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37, 2009, Issue 1, pp. 16-23
537. L.A. Dobrzański, L.W. Żukowska, J. Mikuła, K. Gołombek, P. Podstawski: Functional properties of the sintered tool materials with (Ti,Al)N coating, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009, Issue 2, pp. 134-141
538. B. Ziębowicz, M. Drak, L.A. Dobrzański: Corrosion resistance of the composite materials: nanocrystalline powder – polymer type in acid environment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009, Issue 2, pp. 126-133
539. L.A. Dobrzański, M. Kremzer, J. Trzaska, A. Nagel: Examination and simulation of composite materials Al-Al2O3 tribological properties, Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009, Issue 4, pp. 205-212
540. A. Śliwa, J. Mikuła, K. Gołombek, L.A. Dobrzański: FEM modelling of internal stresses in PVD coated FGM, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009, Issue 1, pp. 71-78 & Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 1, pp. 16-23
541. L.A. Dobrzański, J. Hajduczek, A. Kloc-Ptaszna: Effect of sintering parameters on structure of the gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36, 2009, Issue 1, pp. 33-40
542. A. Śliwa, L.A. Dobrzański, W. Kwaśny, W. Sitek: The computer simulation of internal stresses on the PVD coatings, Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009, Issue 3, pp.183-188
543. L.A. Dobrzański, S. Skrzypek, D. Pakuła, J. Mikuła, A. Křiž: Influence of the PVD and CVD technologies on the residual macro-stresses and functional properties of the coated tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 2, pp. 162-168
544. L.A. Dobrzański, R. Honysz: Computer modelling system of the chemical composition and treatment parameters influence on mechanical properties of structural steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 2, pp. 138-145
545. L.A. Dobrzański, A. Pusz, A.J. Nowak: The elimination of micropores and surface defects in aramid-silicon laminated materials with special properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 2, pp. 121-128
546. L. Čížek, A. Hanus, O. Blahož, T. Tański, L.A. Dobrzański, M. Prażmowski, L. Pawlica: Structure and mechanical properties of Mg-Si alloys at elevated temperatures, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 1, pp. 37-46
547. J.P. Weszka, P. Jarka, D. Pakuła, L.A. Dobrzański, M. Domański, J. Jurusik: Studying of kinetic growth of organic thin films, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 1, pp. 29-36
548. L.A. Dobrzański, M. Kremzer, A. Nagel: Structure and properties of ceramic preforms based on Al2O3 particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35, 2009, Issue 1, pp.7-13
549. M. Krupiński, K. Labisz, L.A. Dobrzański: Structure investigation of the Al-Si-Cu alloy using derivative thermo analysis, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 34, Issue 1, 2009, pp. 47-54
550. L.A. Dobrzański, A. Zieliński, M. Sroka: The influence of simultaneous impact of temperature and time on the properties and structure of X10CrWMoVNb9-2 steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 34, 2009, Issue 1, pp. 7-14
551. Z. Brytan, L.A. Dobrzański, M. Actis Grande, M. Rosso: Characteristic of vacuum sintered stainless steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 33, 2009, Issue 2, pp. 126-134
552. L.A. Dobrzański, A. Śliwa, T. Tański: Finite Element Method application for modelling of mechanical properties, Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009, Issue 1, pp. 25-28
553. L.A. Dobrzański, M. Król, T. Tański, R. Maniara: Effect of cooling rate on the solidification behavior of magnesium alloys, Archives of Computational Materials Science and Surface Engineering, Vol. 1, 2009, Issue 1, pp. 21-24
554. L.A. Dobrzański, T. Tański, L. Čížek, J. Madejski: Selection of heat treatment condition of the Mg-Al-Zn alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 2, pp. 203-210
555. L. Čížek, M. Greger, I. Juřička, R. Kocich, L. Pawlica, L.A. Dobrzański, T. Tański: Structure and properties of alloys of the Mg-Al-Zn system, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 2, pp. 179-187
556. L.A. Dobrzański, K. Labisz, A. Klimpel: Structure and properties of the laser alloyed 32CrMoV12-28 with ceramic powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 1, pp. 53-60
557. L.A. Dobrzański. R. Honysz: Application of artificial neural networks in modelling of normalised structural steels mechanical properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 1, pp. 37-45 & Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 1, pp. 44-52
558. G. Matula, K. Gołombek, J. Mikuła, L.A. Dobrzański: Structure of sintered gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 1, pp. 23-28
559. L.A. Dobrzański, T. Tański, J. Domagała, M. Bonek, A. Klimpel: Microstructure analysis of the modified casting magnesium alloys after heat and laser treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32, 2009, Issue 1, pp. 7-12
560. L.A. Dobrzański, M. Staszuk, M. Pawlyta, W. Kwaśny, M. Pancielejko: Characteristic of Ti(C,N) and (Ti,Zr)N gra-dient PVD coatings deposited onto sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 629-634
561. J. Konieczny, I. Wnuk, L.A. Dobrzański: Structure and magnetic properties of hot pressed powder Co77Si11.5B11.5 alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 335-340
562. J. Konieczny, L.A. Dobrzański, L. Pešek, P. Zubko: Mechanical properties of Co-based amorphous ribbons, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 254-261
563. L.A. Dobrzański, A. Grajcar, W. Borek: Microstructure evolution and phase composition of high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 218-225
564. L.A. Dobrzański, M. Bilewicz, J.C. Viana, A. Cunha: Non-conventionally obtained polymer nanocomposites with different nano-clay ratios, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 212-217
565. L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła: Multilayer and gradient PVD coatings on the sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 170-190
566. L.A. Dobrzański, M. Bonek, E. Hajduczek, K. Labisz, M. Piec, E. Jonda, A. Polok: Structure and properties laser alloyed gradient surface layers of the hot-work tool steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 148-169
567. L.A. Dobrzański, T. Tański, J. Domagała, M. Król, S. Malara, A. Klimpel: Structure and properties of the Mg alloys in as-cast state and after heat and laser treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 2, pp. 123-147
568. M. Drak, B. Ziębowicz, L.A. Dobrzański: Manufacturing of hard magnetic composite materials Nd-Fe-B, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 91-96
569. L.A. Dobrzański, T. Tański, L. Čížek, J. Domagała: Mechanical properties and wear resistance of magnesium casting alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 83-90
570. L.A. Dobrzański, A. Drygała: Surface texturing of multicrystalline silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 77-82
571. M. Bilewicz, J.C. Viana, L.A. Dobrzański: Development of microstructure affected by in-mould manipulation in polymer composites and nanocomposites, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 71-76
572. K. Gołombek, J. Mikuła, D. Pakuła, L. Żukowska, L.A. Dobrzański: Sintered tool materials with multicomponent PVD gradient coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 15-22
573. L.A. Dobrzański, A. Grajcar, W. Borek: Hot-working behaviour of high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31, 2008, Issue 1, pp. 7-14
574. L.A. Dobrzański, M. Krupiński, K. Labisz: Derivative thermo analysis of the near eutectic Al Si-Cu alloy, Archives of Foundry Engineering, Vol. 8, 2008, Issue 4, pp. 37-40
575. L.A. Dobrzański, F. Brom: The assessment of teaching materials science subjects using e-learning method, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 204-210
576. L.A. Dobrzański, M. Roszak: Implementation and functioning of quality management in the research centre, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 197-203
577. L.A. Dobrzański, K. Labisz, M. Bonek, A. Klimpel: Comparison of 32CrMoV12-28 steel alloyed with WC, VC and TaC powder using HPDL laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 187-192
578. M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak: The properties and wear resistance of the CrN PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 165-171
579. A. Włodarczyk-Fligier, L.A. Dobrzański, M. Adamiak: Wear resistance of PM composite materials reinforced with the Ti(C,N) ceramic particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 147-150
580. L.A. Dobrzański, M. Kremzer, M. Drak: Modern composite materials manufactured by pressure infiltration method, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 30, 2008, Issue 2, pp. 121-128
581. K. Labisz, L.A. Dobrzański, J. Konieczny: Anodization of cast aluminium alloys produced by different casting methods, Archives of Foundry Engineering, Vol. 8, 2008, Special Issue 3, pp. 45-50
582. W. Kasprzak, J.H. Sokolowski, M. Sahoo, L.A. Dobrzański: Thermal characteristics of the AM50 magnesium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 2, pp. 179-182
583. L.A. Dobrzański, A. Grajcar, W. Borek: Influence of hot-working conditions on a structure of high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 2, pp. 139-142
584. L.A. Dobrzański, F. Brom: E-learning on the example of materials science, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 1, pp. 99-102
585. L.A. Dobrzański, K. Labisz, E. Jonda: Laser treatment of the surface layer of 32CrMoV12-28 and X40CrMoV5-1 steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 1, pp. 63-70
586. L.A. Dobrzański, T. Tański, L. Čížek: Investigation of the MCMgAl12Zn1 magnesium alloys structure after heat treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 1, pp. 23-30
587. L.A. Dobrzański, A. Drygała: Laser texturisation in technology of multicrystalline silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 29, 2008, Issue 1, pp. 7-14
588. L.A. Dobrzański, J. Domagała, T. Tański, A. Klimpel, D. Janicki: Laser surface treatment of magnesium alloy with WC and TiC powders using HPDL, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 2, pp. 179-186
589. M. Greger, V. Vodárek, L.A. Dobrzański, L. Kander, R. Kocich, B. Kuřetová: The structure of austenitic steel AISI 316 after ECAP and low-cycle fatigue, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 2, pp. 151-158
590. W. Kasprzak, J.H. Sokolowski, M. Sahoo, L.A. Dobrzański: Thermal and structural characteristics of the AM50 mag-nesium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 2, pp. 131-138
591. M. Bonek, M. Piec, L.A. Dobrzański: The study of properties of laser modified hot-work tool steel surface layer, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 1, pp. 75-78
592. L.A. Dobrzański, B. Dołżańska, G. Matula: Structure and properties of tool gradient materials reinforced with the WC carbides, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 1, pp. 35-38
593. L.A. Dobrzański, A. Pusz, A.J. Nowak: Aramid-silicon laminated materials with special properties – new perspective of its usage, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28, 2008, Issue 1, pp. 7-14
594. L.A. Dobrzański, A. Jagiełło, R. Honysz: Virtual tensile test machine as an example of Material Science Virtual Laboratory post, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 207-210
595. G. Matula, L.A. Dobrzański, A. Várez, B. Levenfeld: Development of a feedstock formulation based on PP for MIM of carbides reinforced M2, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 195-198
596. L.A. Dobrzański, E. Jonda, K. Lukaszkowicz, K. Labisz, A. Klimpel: Surface modification of the X40CrMoV5-1 steel by laser alloying and PVD coatings deposition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 179-182
597. A. Śliwa, L.A. Dobrzański, W. Kwaśny, W. Sitek: Finite Element Method application for modeling of PVD coatings properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 171-174
598. L.A. Dobrzański, S. Malara, J. Trzaska: Project of neural network for steel grade selection with the assumed CCT diagram, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 155-158
599. J. Konieczny, K. Labisz, J. Wieczorek, L.A. Dobrzański: Stereometry specification of anodisation surface of casting aluminium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 2, pp. 143-146
600. A. Włodarczyk-Fligier, L.A. Dobrzański, M. Kremzer, M. Adamiak: Manufacturing of aluminium matrix composite materials reinforced by Al2O3 particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 99-102
601. M. Polok-Rubiniec, L.A. Dobrzański, K. Lukaszkowicz, M. Adamiak: Comparison of the structure, properties and wear resistance of the TiN PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 87-90
602. K. Lukaszkowicz, L.A. Dobrzański, M. Staszuk, M. Pancielejko: Comparison of the PVD gradient coatings deposited onto X40CrMoV5-1 and HS6-5-2 tool steel substrate, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 79-82
603. L.A. Dobrzański, M. Krupiński, B. Krupińska: Structure analysis of Al cast alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 23-26
604. L.A. Dobrzański, M. Król, M. Bilewicz, J.C. Viana: Microstructure and mechanical properties of Polypropylene/Polycarbonate blends, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27, 2008, Issue 1, pp. 19-22
605. L.A. Dobrzański, T. Tański, J. Trzaska, L. Čížek: Modelling of hardness prediction of magnesium alloys using artificial neural networks applications, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 26, 2008, Issue 2, pp. 187-190
606. L.A. Dobrzański, K. Labisz, A. Olsen: Microstructure and mechanical properties of the Al-Ti alloy with calcium addition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 26, 2008, Issue 2, pp. 183-186
607. M. Krupiński, L.A. Dobrzański, J.H. Sokolowski: Microstructure analysis of the automotive Al-Si-Cu casting, Archives of Foundry Engineering, Vol. 8, 2008, Issue 1, pp. 71-74
608. L.A. Dobrzański, M. Roszak: Quality management in university education, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 223-226
609. L.A. Dobrzański, R. Honysz: Material science virtual laboratory as an example of the computer aid in material engineering, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 219-222
610. L.A. Dobrzański, F. Brom, Z. Brytan: Use of e-learning in teaching fundamentals of materials science, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 215-218
611. M. Polok-Rubiniec, K. Lukaszkowicz, L.A. Dobrzański, M. Adamiak: Comparison of the PVD coatings deposited onto hot work tool steel and brass substrates, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 195-198
612. L.A. Dobrzański, M. Piec, K. Labisz, M. Bonek, A. Klimpel: Functional properties of surface layers of X38CrMoV5-3 hot work tool steel alloyed with HPDL laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 191-194
613. L.A. Dobrzański, J. Otręba, Z. Brytan, M. Rosso: Utilisation of sinter-hardening treatment for various sintered steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 187-190
614. L.A. Dobrzański, M. Kremzer, A. Nagel: Application of pressure infiltration to the manufacturing of aluminium matrix composite materials with different reinforcement shape, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 183-186
615. L.A. Dobrzański, A. Drygała, P. Panek, M. Lipiński, P. Zięba: Application of laser in multicrystalline silicon surface processing, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 179-182
616. M. Bonek, L.A. Dobrzański, A. Klimpel: Structure and properties of hot-work tool steel alloyed by WC carbides by a use of high power diode laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 175-178
617. J. Trzaska, L.A. Dobrzański, A. Jagiełło: Computer program for prediction steel parameters after heat treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 171-174
618. W. Kwaśny, W. Sitek, L.A. Dobrzański: Modelling of properties of the PVD coatings using neural networks, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 163-166
619. W. Kwaśny, L.A. Dobrzański, M. Król, J. Mikuła: Fractal and multifractal characteristics of PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 159-162
620. L.A. Dobrzański, A. Śliwa, W. Kwaśny: The computer simulation of stresses in the Ti+Ti(CxN1-x) coatings obtained in the PVD process, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 155-158
621. L.A. Dobrzański, M. Krupiński, R. Maniara, J.H. Sokolowski: Computer aided method for quality control of automotive Al-Si-Cu cast components, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 151-154
622. L.A. Dobrzański, M. Gumińska: Computer aided system for selection of parameters for making metallographic microsections, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 147-150
623. L.A. Dobrzański, M. Kasprzak, W. Kasprzak, J.H. Sokolowski: A novel approach to the design and optimisation of aluminium cast component heat treatment processes using advanced UMSA physical simulations, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 139-142
624. L.A. Dobrzański, E. Jonda, A. Polok, A. Klimpel: Comparison of the thermal fatigue surface layers of the X40CrMoV5-1 hot work tool steels laser alloyed, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 135-138
625. L. Čížek, M. Greger, L.A. Dobrzański, R. Kocich, T. Tański, M. Praźmowski: Fracture analysis of selected magnesium alloys after different testing methods, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 131-134
626. A. Włodarczyk-Fligier, L.A. Dobrzański, M. Adamiak: Influence of heat treatment on corrosion resistance of PM composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 127-130
627. J. Mazurkiewicz, L.A. Dobrzański, E. Hajduczek: Comparison of the secondary hardness effect after tempering of the hot-work tool steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 119-122
628. K. Lukaszkowicz, L.A. Dobrzański, M. Pancielejko: Mechanical properties of the PVD gradient coatings deposited onto the hot work tool steel X40CrMoV5-1, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 115-118
629. J. Konieczny, L.A. Dobrzański, I. Wnuk: Magnetic properties of hot pressed powder Co68Fe4Mo1Si13.5B13.5 alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 111-114
630. K. Gołombek, L.A. Dobrzański: Hard and wear resistant coatings for cutting tools, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 107-110
631. L.A. Dobrzański, T. Tański, J. Domagała, L. Čížek: Mechanical properties of magnesium casting alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 99-102
632. L.A. Dobrzański, B. Dołżańska, G. Matula: Influence of hard ceramic particles on structure and properties of TGM, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 95-98
633. B. Ziębowicz, L.A. Dobrzański: Application of nanostructural materials in manufacturing of soft magnetic composite materials Fe73.5Cu1Nb3Si13.5B9 – PEHD type, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 91-94
634. D. Pakuła, L.A. Dobrzański: Investigation of the structure and properties of PVD and CVD coatings deposited on the Si3N4 nitride ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 79-82
635. J. Mikuła, L.A. Dobrzański: PVD and CVD coating systems on oxide tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 75-78
636. G. Matula, L.A. Dobrzański, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Structure and properties of HS6-5-2 type HSS manufactured by different P/M methods, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 71-74
637. M. Drak, L.A. Dobrzański: Hard magnetic materials Nd-Fe-B/Fe with epoxy resin matrix, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 63-66
638. L.A. Dobrzański, L. Wosińska, J. Mikuła, K. Gołombek, T. Gawarecki: Investigation of hard gradient PVD (Ti,Al,Si)N coating, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 59-62
639. L.A. Dobrzański, M. Staszuk, J. Konieczny, J. Lelątko: Structure of gradient coatings deposited by CAE-PVD techniques, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 55-58
640. L.A. Dobrzański, R. Maniara, M. Krupiński, J.H. Sokolowski: Microstructure and mechanical properties of AC AlSi9CuX alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 51-54
641. L.A. Dobrzański, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Structure and properties of gradient tool materials with the high-speed steel matrix, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 47-50
642. M. Bilewicz, J.C. Viana, L.A. Dobrzański: Self reinforced polymer-polymer composites, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 43-46
643. L.A. Dobrzański, K. Labisz, M. Piec, A. Klimpel: Modelling of surface layer of the 32CrMoV12-28 tool steel using HPDL laser for alloying with TiC powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 27-34
644. L.A. Dobrzański, A. Kloc-Ptaszna, G. Matula, J.M. Contreras, J.M. Torralba: The impact of production methods on the properties of gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 19-26
645. L.A. Dobrzański, Z. Brytan, M. Rosso: Sinter-hardening process applicable to stainless steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24, 2007, Issue 2, pp. 11-18
646. L.A. Dobrzański, T. Tański, J. Domagała: Microstructure analysis of MCMgAl16Zn1 MCMgAl8Zn1 MCMgAl4Zn1 cast magnesium alloys, Archives of Foundry Engineering, Vol. 7, 2007, Issue 4, pp. 33-38
647. L.A. Dobrzański, A. Drygała, J. Konieczny, J. Lelątko: Structure of laser treated multicrystalline silicon wafers, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21, 2007, Issue 2, pp. 69-72
648. L.A. Dobrzański, M. Krupiński, P. Zarychta, R. Maniara: Analysis of influence of chemical composition of Al-Si-Cu casting alloy on formation of casting defects, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21, 2007, Issue 2, pp. 53-56
649. R. Maniara, L.A. Dobrzański, M. Krupiński, J.H. Sokołowski: The effect of copper concentration on the microstructure of Al-Si-Cu alloys, Archives of Foundry Engineering, Vol. 7, 2007, Issue 2, pp. 119-124
650. L.A. Dobrzański, M. Krupiński, R. Maniara, J.H. Sokolowski: Quality analysis of the Al-Si-Cu alloy castings, Archives of Foundry Engineering, Vol. 7, 2007, Issue 2, pp. 91-94
651. A. Włodarczyk-Fligier, L.A. Dobrzański, M. Adamiak: Influence of heat treatment on properties and corrosion resi-stance of Al-composite, Journal of Achievements in Materials and Manufacturing Engineering, 2007, Vol. 21, Issue 1, pp. 55-58
652. L.A. Dobrzański, M. Piec, A. Klimpel: Improvement of the hot work tool steel surface layers properties using a high power diode laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21, 2007, Issue 1, pp. 13-22
653. L.A. Dobrzański, R. Honysz: Development of the virtual light microscope for a material science virtual laboratory, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 571-574
654. L.A. Dobrzański, T. Tański, L. Čížek: Heat treatment impact on the structure of die-cast magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 431-434
655. L.A. Dobrzański, J. Otręba, M. Actis Grande, M. Rosso: Sinter-hardening of Ni-Mo pre-alloyed powders with tungsten addition, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 427-430
656. L.A. Dobrzański K. Lukaszkowicz, A. Zarychta: Mechanical properties of monolayer coatings deposited by PVD techniques, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 423-426
657. M. Bonek, L.A. Dobrzański, M. Piec, E. Hajduczek, A. Klimpel: Crystallisation mechanism of laser alloyed gradient layer on tool steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 411-414
658. W. Sitek, J. Trzaska, L.A. Dobrzański: Evaluation of chemical composition effect on materials properties using AI methods, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 379-382
659. W. Kwaśny, D. Pakuła, M. Woźniak, L.A. Dobrzański: Fractal and multifractal characteristics of CVD coatings deposited onto the nitride tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 371-374
660. L.A. Dobrzański, A. Śliwa, W. Kwaśny: The computer simulation of internal stresses in coatings obtained by the PVD process, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 355-358
661. L.A. Dobrzański, S. Malara, J. Trzaska: Project of computer program for designing the steel with the assumed CCT diagram, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 351-354
662. L.A. Dobrzański, R. Maniara, J.H. Sokolowski, M. Krupiński: Modelling of mechanical properties of Al-Si-Cu cast alloys using the neural network, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 347-350
663. L.A. Dobrzański, K. Labisz, A. Klimpel, J. Lelątko: Modelling of gradient layer properties of the 32CrMoV12-27 surface layer alloyed with WC powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 343-346
664. L.A. Dobrzański, M. Sroka, J. Dobrzański: Application of neural networks to classification of internal damages in steels working in creep service, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 303-306
665. M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak: Comparison of the adhesion and wear resistance of the PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 279-282
666. M. Janošec, I. Schindler, J. Palát, L. Čížek, V. Vodárek, E. Místecký, M. Růžička, L.A. Dobrzański, S. Rusz, P. Suchánek: Properties of a Nb-V-Ti microalloyed steel influenced by cold rolling and annealing, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 251-254
667. M. Drak, L.A. Dobrzański: Corrosion of Nd-Fe-B permanent magnets, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 239-242
668. L.A. Dobrzański, M. Piec, M. Bonek, E. Jonda, A. Klimpel: Mechanical and tribological properties of the laser alloyed surface coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 235-238
669. L.A. Dobrzański, Z., M. Actis Grande, M. Rosso: Influence of sintering parameters on the properties of duplex stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 231-234
670. B. Ziębowicz, D. Szewieczek, L.A. Dobrzański: New possibilities of application of composite materials with soft magnetic properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 207-210
671. R. Nowosielski, L.A. Dobrzański, J. Konieczny: Influence of temperature on structure and magnetic properties of powders alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 163-166
672. G. Matula, L.A. Dobrzański, B. Dołżańska: Structure and properties of TGM manufactured on the basis of cobalt, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 151-154
673. J. Konieczny, L.A. Dobrzański, A. Przybył, J.J. Wysłocki: Structure and magnetic properties of powder soft magnetic materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 139-142
674. W. Hufenbach, L.A. Dobrzański, M. Gude, J. Konieczny, A. Czulak: Optimisation of the rivet joints of the CFRP composite material and aluminium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 119-122
675. L.A. Dobrzański, L. Wosińska, K. Gołombek, J. Mikuła: Structure of multicomponent and gradient PVD coatings deposited on sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 99-102
676. L.A. Dobrzański, M. Kremzer, A.J. Nowak, A. Nagel: Composite materials based on porous ceramic preform infiltrated by aluminium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 95-98
677. L.A. Dobrzański, A. Kloc-Ptaszna, A. Dybowska, G. Matula, E. Gordo, J.M. Torralba: Effect of WC concentration on structure and properties of the gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 91-94
678. L.A. Dobrzański, M. Krupiński, J.H. Sokolowski: Methodology of automatic quality control of aluminium castings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, 2007, Issues 1-2, pp. 69-78
679. L.A. Dobrzański, T. Tański, L. Čížek: Microstructure of MCMgAl12Zn1 magnesium alloy, Archives of Foundry Engineering, Vol. 7, 2007, Issue 1, pp. 179-182
680. L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła: Improvement of tool materials by deposition of gradient and multilayers coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006, Issue 2, pp. 86-91
681. L.A. Dobrzański, T. Tański, L. Čížek: Influence of Al addition on structure of magnesium casting alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006, Issue 2, pp. 49-55
682. L.A. Dobrzański, K. Labisz, A. Klimpel: Effect of laser alloying on thermal fatigue and mechanical properties of the 32CrMoV12-20 steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006, Issue 1, pp. 83-90
683. L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion resistance properties of sintered duplex stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 19, 2006, Issue 1, pp. 38-45
684. L.A. Dobrzański, J. Otręba, M. Actis Grande, M. Rosso: Microstructural characteristic and mechanical properties of Ni-Mo-(W) steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 347-350
685. L.A. Dobrzański, E. Jonda, K. Lukaszkowicz, A. Křiž: Structure and tribological behavior of surface layer of laser modified X40CrMoV5-1 steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 343-346
686. L.A. Dobrzański, M. Staszuk, A. Śliwa: Simulation of the microhardness measurement of PVD coatings by use of FEM, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 279-282
687. L.A. Dobrzański, K. Lukaszkowicz, K. Labisz: Structure of monolayer coatings deposited by PVD techniques, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 271-274
688. L.A. Dobrzański, M. Krupiński, J.H. Sokolowski, P. Zarychta, A. Włodarczyk-Fligier: Methodology of analysis of casting defects, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 267-270
689. I. Schindler, M. Janošec, E. Místecký, M. Růžička, L. Čížek, L.A. Dobrzański, S. Rusz, P. Suchánek: Influence of cold rolling and annealing on mechanical properties of steel QStE 420, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 231-234
690. L.A. Dobrzański, L. Wosińska, B. Dołżańska, A. Drygała: Comparison of electrical characteristics of silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 215-218
691. L.A. Dobrzański, W. Borek, R. Maniara: Influence of the crystallization condition on Al-Si-Cu casting alloys structure, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 211-214
692. L. Čížek, M. Greger, L.A. Dobrzański, I. Juřička, R. Kocich, L. Pawlica, T. Tański: Mechanical properties of magnesium alloy AZ91 at elevated temperatures, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 203-206
693. J. Konieczny, L.A. Dobrzański, J.E. Frąckowiak: Structure and properties of the powder obtained from the amorphous ribbon, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 143-146
694. M. Greger, R. Kocich, L. Čížek, L.A. Dobrzański, M. Widomská, B. Kuřetová, A. Silbernagel: The structure and properties of chosen metals after ECAP, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 103-106
695. L.A. Dobrzański, B. Ziębowicz, M. Drak: Mechanical properties and the structure of magnetic composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 79-82
696. L.A. Dobrzański, K. Lukaszkowicz, J. Mikuła, D. Pakuła: Structure and corrosion resistance of gradient and multilayer coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 75-78
697. L.A. Dobrzański, M. Kremzer, A. Nagel, B. Huchler: Fabrication of ceramic preforms based on Al2O3 CL 2500 powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, Issues 1-2, pp. 71-74
698. L.A. Dobrzański, R. Honysz, Z. Brytan: Application of interactive course management system in distance learning of material science, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 429-432
699. A. Klimpel, L.A. Dobrzański, A. Lisiecki, D. Janicki: Wear phenomena of spinning rolls for stone wool production, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 365-368
700. A. Klimpel, L.A. Dobrzański, T. Kik, A. Rzeźnikiewicz: Robotized GMA surfacing of cermetalic layers, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 361-364
701. L.A. Dobrzański, A. Polok, E. Jonda: Structure and properties of surface layers obtained by alloying of the hot work tool steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 329-332
702. L.A. Dobrzański, K. Labisz, A. Klimpel: Mechanical properties and structure changes of the laser alloyed 32CrMoV12-28 steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 325-328
703. L.A. Dobrzański, A. Drygała: Processing of silicon surface by Nd:YAG laser, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 321-324
704. L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion resistance of sintered duplex stainless steel evaluated by electrochemical method, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 317-320
705. M. Bonek, L.A. Dobrzański: Functional properties of laser modified surface of tool steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 313-316
706. J. Trzaska, W. Sitek, L.A. Dobrzański: Selection method of steel grade with required hardenability, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 289-292
707. W. Sitek, J. Trzaska, L.A. Dobrzański: An artificial intelligence approach in designing new materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 277-280
708. W. Kwaśny, J. Mikuła, L.A. Dobrzański: Fractal and multifractal characteristics of coatings deposited on pure oxide ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 257-260
709. L.A. Dobrzański, A. Śliwa, W. Kwaśny, W. Sitek: The computer simulation of stresses in the Ti+TiC coatings obtained in the PVD process, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 241-244
710. L.A. Dobrzański, T. Tański, L. Čížek: Influence of Al addition on structure of magnesium casting alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 221-224
711. L.A. Dobrzański, R. Maniara, J.H. Sokolowski: The effect of cast Al-Si-Cu alloy solidification rate on alloy thermal characteristics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 217-220
712. G. Matula, L.A. Dobrzański: Structure and properties of FGM manufactured on the basis of HS6-5-2, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 101-104
713. L.A. Dobrzański, J. Mazurkiewicz, E. Hajduczek: Influence of the Zr and Ce on the structure of experimental hot-work tool steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 49-52
714. L.A. Dobrzański, A. Kloc, G. Matula, J. Domagała, J.M. Torralba: Effect of carbon concentration on structure and properties of the gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 45-48
715. L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła: Cutting ability improvement of coated tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 41-44
716. L.A. Dobrzański, M. Drak, B. Ziębowicz: Materials with specific magnetic properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 37-40
717. A. Klimpel, L.A. Dobrzański: Laser powder surfacing of the Si-Mo spheroidal cast iron with nickel powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, 2006, Issues 1-2, pp. 21-26
718. J. Trzaska, L.A. Dobrzański: Application of neural networks for selection of steel with the assumed hardness after cooling from the austenitising temperature, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 16, 2006, Issues 1-2, pp. 145-150
719. L.A. Dobrzański, R. Honysz, S. Fassois: On the identification of composite beam dynamics based upon experimental data, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 16, 2006, Issues 1-2, pp. 114-123
720. M. Bilewicz, J.C. Viana, A.M. Cunha, L.A. Dobrzański: Morphology diversity and mechanical response of injection moulded polymer nanocomposites and polymer-polymer composites, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 15, 2006, Issues 1-2, pp. 159-165
721. K. Lukaszkowicz, L.A. Dobrzański, A. Zarychta, L. Cunha: Mechanical properties of multilayer coatings deposited by PVD techniques onto the brass substrate, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 15, 2006, Issues 1-2, pp. 47-52
722. L.A. Dobrzański, E. Jonda, A. Polok: Comparison of the abrasion wear resistance of the X40CrMoV5-1 and 55NiCrMoV7 hot work tool steels with their surface layer enriched with the ceramic powders, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 15, 2006, Issues 1-2, pp. 32-38
723. L.A. Dobrzański: Synergic effects of the scientific cooperation in the field of materials and manufacturing engineering, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 15, 2006, Issues 1-2, pp. 9-20
724. M. Bonek, L.A. Dobrzański, E. Hajduczek, A. Klimpel: Laser modification of surface layer properties of a hot-work tool steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 14, 2006, Issues 1-2, pp. 152-156
725. L.A. Dobrzański, K. Gołombek: Gradient coatings deposited by Cathodic Arc Evaporation: characteristic of structure and properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 14, 2006, Issues 1-2, pp. 48-53
726. B. Ziębowicz, D. Szewieczek, L.A. Dobrzański: Manufacturing technology of the composite materials: nanocrystalline material – polymer type, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 14, 2006, Issues 1-2, pp. 37-42