Zestawienie artykułów w języku angielskim w czasopismach umieszczonych w Journal Citation Reports of Thomson Reuters w Filadelfii w USA (na tzw. „liście filadelfijskiej”)

74.    M. Pawlyta, B. Tomiczek, L.A. Dobrzański, M. Kujawa, B. Bierska-Piech: Transmission electron microscopy observations on phase transformations during aluminium/mullite composites formation by gas pressure infiltration, Materials Characterization, Vol. 114, 2016, pp. 9-17
75.    A. Drygała, L.A. Dobrzański, M. Szindler, M.M. Szindler, M. Prokopiuk vel Prokopowicz, E. Jonda, Influence of laser texturization surface and atomic layer deposition on optical properties of polycrystalline silicon, International Journal of Hydrogen Energy, Vol. 41, 2016, pp. 5 (in print)
76.    A.E. Tomiczek, R. Mech, L.A. Dobrzański: Variation of magneto-mechanical properties in giant magnetostrictive composite materials, Polymer Composites, Vol. 36, 2015, Issue 6, pp. 1-6, DOI:10.1002/pc.23640 (in print)
77.    A.E. Tomiczek, L.A. Dobrzański, M. Macek: Effect of milling time on microstructure and properties of AA6061/MWCNTS composite powders, Archives of Metallurgy and Materials, Vol. 60, 2015, Issue 4, pp. 3029-3034
78.    L.A. Dobrzański, M. Szindler, M.M. Szindler, B. Hajduk, S. Kotowicz: The impact of atomic layer deposition technological parameters on optical properties and morphology of Al2O3 thin films, Optica Applicata, Vol. XLV, 2015, No. 4, 573-583
79.    L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, T.G. Gaweł, A. Achtelik-Franczak: Selective laser sintering and melting of pristine titanium and titanium Ti6Al4V alloy powders and selection of chemical environment for etching of such materials, Archives of Metallurgy and Materials, Vol. 60, 2015, Issue 3, pp. 2039-2045
80.    A.E. Tomiczek, R. Mech, L.A. Dobrzański, T. Tański: Magnetomechanical properties of composite materials with giant magnetostriction, Archives of Metallurgy and Materials, Vol. 60, 2015, Issue 3, pp. 1819-1823
81.    L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, P. Malara, T. Gaweł, L.B. Dobrzański, A. Achtelik-Franczak: Fabrication of scaffolds from Ti6Al4V powders using the computer aided laser method, Archives of Metallurgy and Materials, Vol. 60, 2015, Issue 2, pp. 1065-1070
82.    B. Tomiczek, M. Pawlyta, M. Adamiak, L.A. Dobrzański: Effect of milling time on microstructure of AA6061 composites fabricated via mechanical alloying, Archives of Metallurgy and Materials, Vol. 60, 2015, Issue 2, pp. 789-793
83.    L.A. Dobrzański, M. Czaja, W. Borek, K. Labisz, T. Tański: Influence of hot-working conditions on a structure of X11MnSiAl17-1-3 steel for automotive industry, International Journal of Materials and Product Technology, Vol. 51, 2015, No. 3, pp. 264-280
84.    B. Tomiczek, M. Kujawa, G. Matula, M. Kremzer, T. Tański, L.A. Dobrzański: Aluminium AlSi12 alloy matrix composites reinforced by mullite porous preforms, Materialwissenschaft und Werkstofftechnik, Vol. 46, 2015, Issue 4-5, pp. 368-376
85.    Ł. Reimann, J. Żmudzki, L.A. Dobrzański: Strength analysis of a three-unit dental bridge framework with the Finite Element Method, Acta of Bioengineering and Biomechanics, Vol. 17, 2015, No. 1, pp. 51-59
86.    M. Musztyfaga-Staszuk, L.A. Dobrzański: The use of laser technology to shape properties of the contacts of silicon solar cells and their structure, Central European Journal of Physics, Vol. 12, 2014, Issue 12, pp. 836-842
87.    L.A. Dobrzański, M. Szindler, A. Drygała, M.M. Szindler: Silicon solar cells with Al2O3 antireflection coating, Central European Journal of Physics, Vol. 12, 2014, Issue 9, pp. 666-670
88.    L.A. Dobrzański, B. Tomiczek, M. Pawlyta, M. Król: Aluminium AlMg1SiCu matrix composite materials reinforced with halloysite particles, Archives of Metallurgy and Materials, Vol. 59, 2014, Issue 1, pp. 335-338
89.    M. Staszuk, L.A. Dobrzański, T. Tański, W. Kwaśny, M. Musztyfaga-Staszuk: The effect of PVD and CVD coating structures on the durability of sintered cutting edges, Archives of Metallurgy and Materials, Vol. 59, 2014, Issue 1, pp. 269-274
90.    M. Musztyfaga-Staszuk, L.A. Dobrzański, S. Rusz, M. Staszuk: Application examples for the different measurement modes of electrical properties of the solar cells, Archives of Metallurgy and Materials, Vol. 59, 2014, Issue 1, pp. 247-251
91.    J. Żmudzki, G. Chladek, J. Kasperski, L.A. Dobrzański: One Versus Two Implant-Retained Dentures: Comparing Biomechanics Under Oblique Mastication Forces, Journal of Biomecha¬nical Engineering, Vol. 135, 2013, Issue 5, pp. 054503-1-054503-4
92.    L.A. Dobrzański, M. Musztyfaga, A. Drygała: Final Manufacturing Process of Front Side Metallisation on Silicon Solar Cells Using Conventional and Unconventional Techniques, Strojniški Vestnik – Journal of Mechanical Engineering, Vol. 59, 2013, Issue 3, pp. 175-182
93.    L.A. Dobrzański, W. Borek: Thermo-mechanical treatment of Fe-Mn-(Al, Si) TRIP/TWIP steels, Archives of Civil and Mechanical Engineering, Vol. 12, 2012, Issue 3, pp. 299-304
94.    K. Lukaszkowicz, L.A. Dobrzański, G. Kokot, P. Ostachowski: Characterization and properties of PVD coatings applied to extrusion dies, Vacuum, Vol. 86, 2012, Issue 12, pp. 2082-2088
95.    L.A. Dobrzański, M. Staszuk, K. Gołombek, A. Śliwa, M. Pancielejko: Structure and properties PVD and CVD coatings deposited onto edges of sintered cutting tools, Archives of Metallurgy and Materials, Vol. 55, 2010, Issue 1, pp.187-193
96.    L.A. Dobrzański, M. Pawlyta, A. Krztoń, B. Liszka, C.W. Tai, W. Kwaśny: Synthesis and characterization of carbon nanotubes decorated with gold nanoparticles, Acta Physica Polonica A, Vol. 118, 2010, No. 3, pp. 483-486
97.    G. Matula, L.A. Dobrzański, B. Dołżańska: Influence of cobalt portion on structure and pro¬perties of FGHM, International Journal of Materials and Product Technology, Vol. 33, 2008, No. 3, pp. 280-290
98.    L.A. Dobrzański, B. Ziębowicz, M. Drak: Magnetic nanocomposite materials: structure and mechanical properties, International Journal of Materials and Product Technology, Vol. 33, 2008, No. 3, pp. 240-251
99.    L.A. Dobrzański, M. Polok-Rubiniec, M. Adamiak: PVD coatings deposited onto plasma nitrided X37CrMoV5-1 type steel, International Journal of Materials and Product Technology, Vol. 33, 2008, No. 3, pp. 226-239
100.    M. Adamiak, L.A. Dobrzański: Microstructure and selected properties of hot-work tool steel with PVD coatings after laser surface treatment, Applied Surface Science, Vol. 254, 2008, Issue 15, pp. 4552-4556
101.    L.A. Dobrzański, L.W. Żukowska, J. Mikuła, K. Gołombek, D. Pakuła, M. Pancielejko: Stru¬cture and mechanical properties of gradient PVD coatings, Journal of Materials Processing Technology, Vol. 201, Issues 1-3, 2008, pp. 310-314
102.    L.A. Dobrzański, A. Drygała, K. Gołombek, P. Panek, E. Bielańska, P. Zięba: Laser surface treatment of multicrystalline silicon for enhancing optical properties, Journal of Materials Processing Technology, Vol. 201, Issues 1-3, 2008, pp. 291-296
103.    K. Lukaszkowicz, L.A. Dobrzański: Structure and mechanical properties of gradient coatings deposited by PVD technology onto the X40CrMoV5-1 steel substrate, Journal of Materials Science, Vol. 43, 2008, No. 10, pp. 3400-3407
104.    L.A. Dobrzański, M. Drak: Hard magnetic composite materials Nd-Fe-B with additions of iron and X2CrNiMo-17-12-2 steel, Journal of Alloys and Compounds, Vol. 449, 2008, Issues 1-2, pp. 88-92
105.    L.A. Dobrzański, M. Drak, J. Trzaska: Computer simulation of hard magnetic composite materials Nd-Fe-B properties, Journal of Materials Processing Technology, Vols. 192-193, 2007, pp. 595-601
106.    L.A. Dobrzański, R. Maniara, J. Sokolowski, W. Kasprzak, M. Krupiński, Z. Brytan: Appli¬ca¬tions of the artificial intelligence methods for modeling of the ACAlSi7Cu alloy crystallization process, Journal of Materials Processing Technology, Vols. 192-193, 2007, pp. 582-587
107.    L.A. Dobrzański, T. Tański, L. Čížek, Z. Brytan: Structure and properties of magnesium cast alloys, Journal of Materials Processing Technology, Vols. 192-193, 2007, pp. 567-574
108.    J. Trzaska, L.A. Dobrzański: Modelling of CCT diagrams for engineering and constructional steels, Journal of Materials Processing Technology, Vols. 192-193, 2007, pp. 504-510
109.    L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion resistance of sintered duplex stainless steels in the salt fog spray test, Journal of Materials Processing Technology, Vols. 192-193, 2007, pp. 443-448
110.    L.A. Dobrzański, M. Drak, B. Ziębowicz: New possibilities of composite materials application – Materials of specific magnetic properties, Journal of Materials Processing Technology, Vol. 191, 2007, Issues 1-3, pp. 352-355
111.    L.A. Dobrzański, K. Labisz, E. Jonda, A. Klimpel: Comparison of the surface alloying of the 32CrMoV12-28 tool steel using TiC and WC powder, Journal of Materials Processing Tech¬nology, Vol. 191, 2007, Issues 1-3, pp. 321-325
112.    L.A. Dobrzański, R. Maniara, J. Sokolowski, W. Kasprzak: Effect of cooling rate on the solidification behavior of AC AlSi7Cu2 alloy, Journal of Materials Processing Technology, Vol. 191, 2007, Issues 1-3, pp. 317-320
113.    L.A. Dobrzański, A. Drygała: Laser processing of multicrystalline silicon for texturization of solar cells, Journal of Materials Processing Technology, Vol. 191, 2007, Issues 1-3, pp. 228-231
114.    L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion behavior of vacuum sin¬tered duplex stainless steels, Journal of Materials Processing Technology, Vol. 191, 2007, Issues 1-3, pp. 161-164
115.    L.A. Dobrzański, M. Piec, A. Klimpel, Z. Trojanowa: Surface modification of hot work tool steel by high-power diode laser, International Journal of Machine Tools and Manufacture, Vol. 47, 2007, Issue 5, pp. 773-778
116.    L. Pesek, L.A. Dobrzański, P. Zubko, J. Konieczny: Mechanical properties of metallic ribbons investigated by depth sensing indentation technique, Journal of Magnetism and Magnetic Materials, Vol. 304, 2006, Issue 2, pp. e645-e647
117.    B. Ziębowicz, D. Szewieczek, L.A. Dobrzański: Structure and properties of the Fe73,5Cu1Nb3Si13,5B9 alloy powders bound with polyethylene, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 457-462
118.    A. Klimpel, L.A. Dobrzański, A. Lisiecki, D. Janicki: The study of the technology of laser and plasma surfacing of engine valves face made of X40CrSiMo10-2 steel using cobalt-based powders, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 251-256
119.    L.A. Dobrzański, A. Włodarczyk, M. Adamiak: The structure and properties of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the BN or Al2O3 ceramic particles, Journal of Materials Processing Tech¬no¬logy, Vol. 175, 2006, Issues 1-3, pp. 186-191
120.    L.A. Dobrzański, D. Pakuła, A. Křiž, M. Soković, J. Kopač: Tribological properties of the PVD and CVD coatings deposited onto the nitride tool ceramics, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 179-185
121.    L.A. Dobrzański, G. Matula, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Metal inje¬ction moulding of HS12-1-5-5 high-speed steel using a PW-HDPE based binder, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 173-178
122.    L.A. Dobrzański, J. Madejski: Prototype of an expert system for selection of coatings for metals, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 163-172
123.    L.A. Dobrzański, K. Gołombek, E. Hajduczek: Structure of the nanocrystalline coatings obtained on the CAE process on the sintered tool materials, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 157-162
124.    L.A. Dobrzański, M. Drak: Properties of composite materials with polymer matrix reinforced with Nd-Fe-B hard magnetic particles, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 149-156
125.    L.A. Dobrzański: Significance of materials science for the future development of societies, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 133-148
126.    M. Bonek, L.A. Dobrzański, E. Hajduczek, A. Klimpel: Structure and properties of laser alloyed surface layers on the hot-work tool steel, Journal of Materials Processing Technology, Vol. 175, 2006, Issues 1-3, pp. 45-54
127.    L.A. Dobrzański, R. Nowosielski, J. Konieczny, A. Przybył, J. Wysłocki: Structure and pro¬perties of nanocrystalline soft magnetic composite materials with silicon polymer matrix, Journal of Magnetism and Magnetic Materials, Vols. 290-291, 2005, Part 2, pp. 1510-1512
128.    L.A. Dobrzański, M. Krupiński, J.H. Sokolowski: Computer aided classification of flaws occurred during casting of aluminum, Journal of Materials Processing Technology, Vol. 167, 2005, Issues 2-3, pp. 456-462
129.    L.A. Dobrzański, J. Mikuła: The structure and functional properties of PVD and CVD coated Al2O3 + ZrO2 oxide tool ceramics, Journal of Materials Processing Technology, Vol. 167, 2005, Issues 2-3, pp. 438-446
130.    J. Trzaska, L.A. Dobrzański: Application of neural networks for designing the chemical com¬po¬sition of steel with the assumed hardness after cooling from the austenitising temperature, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1637-1643
131.    W. Sitek, L.A. Dobrzański: Application of genetic methods in materials’ design, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1607-1611
132.    W. Kwaśny, L.A. Dobrzański: Structure, physical properties and fractal character of surface topography of the Ti+TiC coatings on sintered high speed steel, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1519-1523
133.    L.A. Dobrzański, M. Kowalski, J. Madejski: Methodology of the mechanical properties prediction for the metallurgical products from the engineering steels using the Artificial Intelligence methods, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1500-1509
134.    L.A. Dobrzański, A. Śliwa, W. Kwaśny: Employment of the finite element method for deter¬mining stresses in coatings obtained on high-speed steel with the PVD process, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1192-1196
135.    A. Klimpel, L.A. Dobrzański, A. Lisiecki, D. Janicki: The study of properties of Ni-W2C and Co-W2C powders thermal sprayed deposits, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1068-1073
136.    A. Klimpel, L.A. Dobrzański, D. Janicki: A study of worn wear plates of fan blades of steel mill fumes suction system, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1062-1067
137.    A. Klimpel, L.A. Dobrzański, D. Janicki, A. Lisiecki: Abrasion resistance of GMA metal cored wires surfaced deposits, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1056-1061
138.    A. Klimpel, L.A. Dobrzański, A. Lisiecki, D. Janicki: The study of properties of Ni-WC wires surfaced deposits, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1046-1055
139.    L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki: Comparison of the structures of the hot-work tool steels laser modified surface layers, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 1014-1024
140.    M. Soković, J. Mikuła, L.A. Dobrzański, J. Kopač, L. Kosec, P. Panjan, J. Madejski, A. Piech: Cutting properties of the Al2O3 + SiC(w) based tool ceramic reinforced with the PVD and CVD wear resistant coatings, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 924-929
141.    L.A. Dobrzański, M. Polok, M. Adamiak: Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 843-849
142.    L.A. Dobrzański, D. Pakuła: Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramics, Journal of Materials Processing Techno¬logy, Vols. 164-165, 2005, pp. 832-842
143.    L.A. Dobrzański, J. Mikuła: Structure and properties of PVD and CVD coated Al2O3 + TiC mixed oxide tool ceramics for dry on high speed cutting processes, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 822-831
144.    L.A. Dobrzański, K. Lukaszkowicz, A. Zarychta, L. Cunha: Corrosion resistance of multilayer coatings deposited by PVD techniques onto the brass substrate, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 816-821
145.    L.A. Dobrzański, K. Gołombek: Structure and properties of the cutting tools made from cemented carbides and cermets with the TiN + mono-, gradient- or multi(Ti,Al,Si)N + TiN nanocrystalline coatings, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 805-815
146.    L.A. Dobrzański, M. Drak, J. Trzaska: Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B, Journal of Materials Processing Technology, Vols. 164-165, 2005, pp. 795-804
147.    L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel: Alloying the X40CrMoV5-1 steel surface layer with tungsten carbide by the use of a high power diode laser, Applied Surface Science, Vol. 247, 2005, Issues 1-4, pp. 328-332
148.    L.A. Dobrzański, Z. Brytan, M.A. Grande, M. Rosso, E.J. Pallavicini: Properties of vacuum sintered duplex stainless steels, Journal of Materials Processing Technology, Vols. 162-163, 2005, pp. 286-292
149.    G. Matula, L.A. Dobrzański, A. Várez, B. Levenfeld, J.M. Torralba: Comparison of structure and properties of the HS12-1-5-5 type high-speed steel fabricated using the pressureless forming and PIM methods, Journal of Materials Processing Technology, Vols. 162-163, 2005, pp. 230-235
150.    B. Ziębowicz, D. Szewieczek, L.A. Dobrzański, J.J. Wysłocki, A. Przybył: Structure and properties of the composite materials consisting of the nanocrystalline Fe73,5Cu1Nb3Si13,5B9 alloy powders and polyethylene, Journal of Materials Processing Technology, 2005, Vols. 162-163, 2005, pp. 149-155
151.    L.A. Dobrzański, A. Włodarczyk, M. Adamiak: Structure, properties and corrosion resistance of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the Al2O3 ceramic particles, Journal of Materials Processing Technology, Vols. 162-163, 2005, pp. 27-32
152.    L.A. Dobrzański, R. Nowosielski, A. Przybył, J. Konieczny: Soft magnetic nano¬composite with powdered metallic ribbon based on cobalt and polymer matrix, Journal of Materials Processing Technology, Vols. 162-163, 2005, pp. 20-26
153.    A. Várez, B. Levenfeld, J.M. Torralba, G. Matula, L.A. Dobrzański: Sintering in different atmospheres of T15 and M2 high speed steels produced by modified metal injection moulding process, Materials Science and Engineering A, Vol. A366, 2004, Issue 2, pp. 318-324
154.    B. Ziębowicz, D. Szewieczek, L.A. Dobrzański: Magnetic properties and structure of nano¬composites of powder Fe73,5Cu1Nb3Si13,5B9 alloy–polymer type, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 776-780
155.    D. Szewieczek, L.A. Dobrzański, B. Ziębowicz: Structure and magnetic properties of nano¬com¬posites of nanocrystalline powder–polymer type, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 765-770
156.    R. Nowosielski, L.A. Dobrzański, P. Gramatyka, S. Griner, J. Konieczny: Magnetic pro¬perties of high-energy milled Fe78Si13B9 nanocrystalline powders and powder-based nano¬composites, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp.755-760
157.    J. Konieczny, L.A. Dobrzański, K. Labisz, J. Duszczyk: The influence of cast method and anodizing parameters on structure and layer thickness of aluminium alloys, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 718-723
158.    L.A. Dobrzański, R. Nowosielski, J. Konieczny, J. Wysłocki, A. Przybył: Properties and structure of the toroidal magnetically soft cores made from the amorphous strips, powder, and composite materials, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 669-678
159.    L.A. Dobrzański, G. Matula, A. Várez, B. Levenfeld, J.M. Torralba: Structure and mechanical properties of HSS HS6-5-2- and HS12-1-5-5-type steel produced by modified powder injection moulding process, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 658-668
160.    L.A. Dobrzański, M. Drak: Structure and properties of composite materials with polymer matrix reinforced Nd-Fe-B hard magnetic nanostructured particles, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 650-657
161.    L.A. Dobrzański, J. Mazurkiewicz, E. Hajduczek: Effect of thermal treatment on structure of newly developed 47CrMoWVTiCeZr16-26-8 hot-work tool steel, Journal of Materials Pro¬cessing Technology, Vols. 157-158, 2004, pp. 472-484
162.    L. Čížek, M. Greger, L. Pawlica, L.A. Dobrzański, T. Tański: Study of selected properties of magnesium alloy AZ91 after heat treatment and forming, Journal of Materials Pro¬cessing Technology, Vols. 157-158, 2004, pp. 466-471
163.    M. Soković, L. Kosec, L.A. Dobrzański: Diffusion across PVD coated cermet tool/work¬piece interface, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 427-433
164.    M. Soković, J. Kopač, L.A. Dobrzański, M. Adamiak: Wear of PVD-coated solid carbide end mills in dry high-speed cutting, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 422-426
165.    D. Pakuła, L.A. Dobrzański, K. Gołombek, M. Pancielejko, A. Křiž: Structure and properties of the Si3N4 nitride ceramics with hard wear resistant coatings, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 388-393
166.    K. Lukaszkowicz, L.A. Dobrzański, A. Zarychta: Structure, chemical and phase compo¬si¬tions of coatings deposited with the reactive magnetron sputtering onto the brass substrate, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 380-387
167.    W. Kwaśny, L.A. Dobrzański, S. Bugliosi: Ti+TiN, Ti+Ti(CxN1-x), Ti+TiC PVD coatings on the ASP 30 sintered high-speed steel, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 370-379
168.    K. Gołombek, L.A. Dobrzański, M. Soković: Properties of the wear resistant coatings depo¬sited on the cemented carbides substrates in the cathodic arc evaporation process, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 341-347
169.    L.A. Dobrzański, D. Pakuła, E. Hajduczek: Structure and properties of the multi-com¬ponent TiAlSiN coatings obtained in the PVD process in the nitride tool ceramics, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 331-340
170.    L.A. Dobrzański, G. Matula, A. Várez, B. Levenfeld, J.M. Torralba: Fabrication methods and heat treatment conditions effect on tribological properties of high speed steels, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 324-330
171.    L.A. Dobrzański, K. Lukaszkowicz: Erosion resistance and tribological properties of coatings deposited by reactive magnetron sputtering method onto the brass substrate, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 317-323
172.    L.A. Dobrzański, W. Kwaśny, Z. Brytan, R. Shishkov, B. Tomov: Structure and properties of the Ti + Ti(C,N) coatings obtained in the PVD process on sintered high speed steel, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 312-316
173.    L.A. Dobrzański, K. Gołombek, J. Kopač, M. Soković: Effect of depositing the hard surface coatings on properties of the selected cemented carbides and tool cermets, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 304-311
174.    W. Sitek, L.A. Dobrzański, J. Zacłona: The modelling of high-speed steels’ properties using neural networks, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 245-249
175.    W. Kwaśny, L.A. Dobrzański, M. Pawlyta, W. Gulbiński: Fractal nature of surface topo¬graphy and physical properties of the coatings obtained using magnetron sputtering, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 188-193
176.    L.A. Dobrzański, J. Trzaska: Application of neural networks to forecasting the CCT diagram, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 107-113
177.    L.A. Dobrzański, W. Sitek, M. Krupiński, J. Dobrzański: Computer aided method for evalua¬tion of failure class of materials working in creep conditions, Journal of Materials Processing Technology, Vols. 157-158, 2004, pp. 102-106
178.    L.A. Dobrzański, J. Trzaska: Application of neural networks for the prediction of continous cooling transformation diagrams, Computational Materials Science, Vol. 30, 2004, Issues 3-4, pp. 251-259
179.    M. Adamiak, J.B. Fogagnolo, E.M. Ruiz-Navas, L.A. Dobrzański, J.T. Torralba: Mecha¬nically milled AA6061/(Ti3Al)p MMC reinforced with intermetallics – the structure and properties, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 2002-2006
180.    L.A. Dobrzański, M. Polok, P. Panjan, S. Bugliosi, M. Adamiak: Improvement of wear resistance of hot work steels by PVD coatings deposition, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 1995-2001
181.    L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki: Application of high power diode laser (HPDL) for alloying of X40CrMoV5-1 steel surface layer by tungsten carbides, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 1956-1963
182.    L.A. Dobrzański, J. Trzaska: Application of neural networks for prediction of critical values of temperatures and time of the supercooled austenite transformations, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 1950-1955
183.    L.A. Dobrzański, R. Nowosielski, J. Konieczny: The structure and magnetic properties of magnetically soft cobalt base nanocrystalline powders and nanocomposites with silicon binding, Journal of Materials Processing Technology, Vols. 155-156, 2004, pp. 1943-1949
184.    L.A. Dobrzański, J. Trzaska: Application of Neural Networks for Prediction of Hardness and Volume Fractions of Structural Components in Constructional Steels Cooled from the Auste¬nitizing Temperature, Materials Science Forum, Vols. 437-438, 2003, pp. 359-362
185.    L.A. Dobrzański, J. Mazurkiewicz, E. Hajduczek: Effect of Heat Treatment on Structure and Properties of Experimental Hot-Work Tool Steel 47CrMoWVTiCeZr16-26-8, Materials Science Forum, Vols. 437-438, 2003, pp. 265-268
186.    L.A. Dobrzański, K. Lukaszkowicz, L. Cunha: Properties of PVD Coatings on a Brass Substrate, Materials Science Forum, Vols. 437-438, 2003, pp. 199-202
187.    L.A. Dobrzański, G. Matula, A. Várez, B. Levenfeld, J.M. Torralba: Structure and Pro¬perties of the Heat-Treated High-Speed Steel HS6-5-2 and HS12-1-5-5 Produced by Powder Injection Molding Process, Materials Science Forum, Vols. 437-438, 2003, pp. 133-136
188.    R. Nowosielski, L.A. Dobrzański, S. Griner, J. Konieczny: Structure and Properties on Nano¬crystalline Composite Materials, Materials Science Forum, Vols. 437-438, 2003, pp. 93-96
189.    L.A. Dobrzański, M. Bonek, A. Klimpel, A. Lisiecki: Surface-Layer’s Structure of X40CrMoV5-1 Steel Remelted and/or WC Alloyed with HPDL Laser, Materials Science Forum, Vols. 437-438, 2003, pp. 69-72
190.    L.A. Dobrzański, K. Gołombek, J. Kopač, M. Soković: Structure and Properties of TiN/TiAlSiN/TiN PVD Coatings on Cemented Carbides and Cermets, Materials Science Forum, Vols. 437-438, 2003, pp. 41-44
191.    L.A. Dobrzański, K. Lukaszkowicz, A. Křiž: Properties of the multi-layer Ti/CrN and Ti/TiAlN coatings deposited with the PVD technique onto the brass substrate, Journal of Materials Processing Technology, Vols. 143-144, 2003, pp. 832-837
192.    L.A. Dobrzański, M. Adamiak: Structure and properties of the TiN and Ti(C,N) coatings deposited in the PVD process on high-speed steels, Journal of Materials Processing Technology, Vol. 133, 2003, Issues 1-2, pp. 50-62
193.    M. Soković, L. Kosec, L.A. Dobrzański: An investigation of the diffusion across a PVD-coated cermet tool/workplece interface, Strojniski Vestnik – Journal of Mechanical Engineering, Vol. 48, 2002, 1, pp. 33-40
194.    L.A. Dobrzański, J. Mazurkiewicz, E. Hajduczek, J. Madejski: Comparison of the thermal fatigue resistance and structure of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel with X40CrMoV5-1 type one, Journal of Materials Processing Technology, Vol. 113, 2001, Issues 1-3, pp. 527 538
195.    L.A. Dobrzański, W. Kwaśny, R. Shishkov, J. Madejski: Effect of the deposition parameters on the properties of the two-layer surface coatings obtained using magnetron sputtering, Journal of Materials Processing Technology, Vol. 113, 2001, Issues 1-3, pp. 493-501
196.    L.A. Dobrzański, M. Adamiak: The Structure and Properties of PVD Coated PM High-Speed Steels, Key Engineering Materials, Vols. 189-191, 2001, pp. 381-386
197.    L.A. Dobrzański, W. Kasprzak: The influence of 5% cobalt addition on structure and working properties of the 9-2-2-5, 11-2-2-5 and 11-0-2-5 high-speed steels, Journal of Materials Processing Technology, Vol. 109, 2001, Issues 1-2, pp. 52-64
198.    L.A. Dobrzański: Structure and properties of high-speed steels with wear resistant cases or coatings, Journal of Materials Processing Technology, Vol. 109, 2001, Issues 1-2, pp. 44-51
199.    A. Bauchspiess, S.C. Absi Alfaro, L.A. Dobrzański: Predictive sensor guided robotic mani¬pulators in automated welding cells, Journal of Materials Processing Technology, Vol. 109, 2001, Issues 1-2, pp. 13-19
200.    L.A. Dobrzański, M. Adamiak, G.E. D’Errico: Relationship between erosion resistance and the phase and chemical composition of PVD coatings deposited onto high-speed steel, Journal of Materials Processing Technology, Vols. 92-93, 1999, pp. 184-189
201.    L.A. Dobrzański, W. Sitek: The modelling of hardenability using neural networks, Journal of Materials Processing Technology, Vols. 92-93, 1999, pp. 8-14
202.    L.A. Dobrzański, M. Adamiak, A. Zarychta: The structure and properties of heat-treated and coated W-Mo-V+Si+Nb high-speed steels, Journal of Materials Processing Techno¬logy, Vols. 89-90, 1999, pp. 520-527
203.    L.A. Dobrzański, W. Sitek, Designing of the chemical composition of constructional alloy steels, Journal of Materials Processing Technology, Vols. 89-90, 1999, pp. 467-472
204.    L.A. Dobrzański, W. Sitek: Application of a neural network in modelling of hardenability of con¬structional steels, Journal of Materials Processing Technology, Vol. 78, 1998, Issues 1-3, pp. 59-66
205.    L.A. Dobrzański, A. Zarychta: The structure and properties of W-Mo-V high-speed steels with increased contents of Si and Nb after heat treatment, Journal of Materials Processing Technology, Vol. 77, 1998, Issues 1-3, pp. 180-193
206.    L.A. Dobrzański, W. Sitek: Comparison of hardenability calculation methods of the heat-treatable constructional steels, Journal of Materials Processing Technology, Vol. 64, 1997, Issues 1-3, pp. 117-126
207.    L.A. Dobrzański, M. Ligarski: Role of Ti in the W-Mo-V high-speed steels, Journal of Materials Processing Technology, Vol. 64, 1997, Issues 1-3, pp. 101-116
208.    L.A. Dobrzański, W. Kasprzak, A. Zarychta, M. Ligarski, J. Mazurkiewicz: Structure and properties of W-Mo-V-Co 11-0-2-5 type and W-Mo-V 11-0-2 type high-speed steels, Journal of Materials Processing Technology, Vol. 64, 1997, Issues 1-3, pp. 93-99
209.    L.A. Dobrzański, A. Zarychta, M. Ligarski: High-speed steels with addition of niobium or titanium, Journal of Materials Processing Technology, Vol. 63, 1997, Issues 1-3, pp. 531-541
210.    L.A. Dobrzański: The structure and properties of W-V high-speed steels with increased content of silicon, Journal of Materials Processing Technology, Vol. 56, 1996, Issues 1-4, pp. 933-944
211.    L.A. Dobrzański, J. Madejski, W. Malina, W. Sitek: The prototype of an expert system for the selection of high-speed steels for cutting tools, Journal of Materials Processing Technology, Vol. 56, 1996, Issues 1-4, pp. 873-881
212.    L.A. Dobrzański, J. Dobrzański, J. Madejski, J. Zacłona: The conception of a computer aided deci¬sion making system connected with the residual life of the elements of power installations in the conditions of creep, Journal of Materials Processing Technology, Vol. 56, 1996, Issues 1-4, pp. 718-728
213.    L.A. Dobrzański, A. Zarychta, M. Ligarski: Phase transformations during heat treatment of W Mo-V 11-2-2 type high-speed steels with increased contents of Si and Nb or Ti, Journal of Materials Processing Technology, Vol. 53, 1995, Issues 1-2, pp. 109-120
214.    L.A. Dobrzański: Effects of chemical composition and processing conditions on the structure and properties of high-speed steels, Journal of Materials Processing Technology, Vol. 48, 1995, Issues 1-4, pp. 727-737
215.    L.A. Dobrzański, J. Dobrzański, J. Madejski, J. Zacłona: The computer system for forecasting of the residual life of the pressure loaded power installation elements, Journal of Materials Pro¬cessing Technology, Vol. 48, 1995, Issues 1-4, pp. 551-560
216.    L.A. Dobrzański, J. Madejski: Computer aided system for selection of the high speed steels and heat treatment technology synthesis of the tools, Journal of Materials Processing Technology, Vol. 38, 1993, Issues 1-2, pp. 135-143
217.    L.A. Dobrzański: High temperature thermo-mechanical treatment of 12-0-2+C type high-speed steel, Journal of Materials Processing Technology, Vol. 38, 1993, Issues 1-2, pp. 123-133
218.    L.A. Dobrzański: Melting and crystallization behaviour of W-V-Si high-speed steels, Steel Research, Vol. 57, 1986, Issue 1, pp. 37 45
219.    L.A. Dobrzański, J. Kwarciak: The use of DTA for determination of the equilibrium diagram for 9 0 2+Si high-speed steel, Thermochimica Acta, Vol. 93, 1985, Issue C, pp. 673 676