1204. L.A. Dobrzański, M. Król: Structure and properties investigation of MCMgAl12Zn1 magnesium alloy, Krzepnięcie i krystalizacja metali - 2012. 53 Międzynarodowa Konferencja Naukowa, Cedzyna – Kielce, 2012, CD-ROM, pp. 1-6
1205. L.A. Dobrzański, R. Honysz: Materials Science Virtual Laboratory - Innovatory Didactic Tool in the Teaching of Material Engineering Performed by Traditional and e-learning Methods, Proceedings of the 4th International Conference Mechatronic Systems and Materials, MSM 2008, Białystok, 2008, pp. 1-8
1206. B. Ziębowicz, D. Szewieczek, L.A. Dobrzański: Manufacturing technology of the composite materials: nanocrystalline material – polymer type, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 1080-1086
1207. J. Trzaska, L.A. Dobrzański: Application of neural networks for selection of steel with the assumed hardness after cooling from the austenitising temperature, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manu¬facturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 1000-1005
1208. D. Szewieczek, L.A. Dobrzański, B. Krupińska, M. Krupiński: Methodical foundations of optimization of technological processes on basis of technological efficiency analysis, Pro¬cee¬dings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 966-975
1209. G. Matula, L.A. Dobrzański, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Comparison of structure and properties of HS6-5-2 type high-speed steel fabricated by different powder forming methods, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 660-665
1210. K. Lukaszkowicz, L.A. Dobrzański, A. Zarychta, L. Cunha: Mechanical properties of multi¬layer coatings deposited by PVD techniques onto the brass substrate, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manu¬facturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 605-610
1211. K. Labisz, L.A. Dobrzański, M. Piec, A. Klimpel: Modeling of surface layer of the 32CrMoV12-28 tool steel using HPDL laser for alloying with TiC powder, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 568-573
1212. W. Kwaśny, L.A. Dobrzański, M. Pawlyta, J. Mikuła: Multifractal characterization of PVD and CVD coatings obtained onto the Al2O3+TiC substrate, Proceedings of the 11th Inter¬national Scientific Conference on the Contemporary Achievements in Mechanics, Manufa¬cturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 558-567
1213. J. Konieczny, L.A. Dobrzański, L. Pešek: Mechanical properties of metallic ribbons based on cobalt by depth sensing indentation technique, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 492-497
1214. M. Greger, R. Kocich, L. Čížek, LA. Dobrzański, I. Juřička: Mechanical properties and micro¬structure of Mg-Al alloys after forming, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 370-375
1215. L.A. Dobrzański, A. Włodarczyk-Fligier, M. Adamiak: Properties and corrosion resistance of PM composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the Ti(C,N) particles, Proceedings of the 11th International Scientific Conference on the Con¬tem¬porary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 289-294
1216. L.A. Dobrzański, T. Tański, L. Čížek: Influence of heat treatment on structure and property of the casting magnesium alloys, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 283-288
1217. L.A. Dobrzański, A. Śliwa, W Sitek, W. Kwaśny: FEM application for modeling of critical compressive stresses located on the edges of PVD coatings, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 277-282
1218. L.A. Dobrzański, S. Skrzypek, D. Pakuła, J. Mikuła: Residual macro-stresses of PVD and CVD coatings deposited on tool ceramics substrates, measured with the application of the grazing angle X-ray diffraction geometry, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 271-276
1219. L.A. Dobrzański, M. Polok-Rubiniec, M. Adamiak: Characterisation of the CrN, TiN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrided hot work tool steel, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 264-270
1220. L.A. Dobrzański, A. Polok, E. Jonda: Effect of laser treatment on changes of the surface layers properties of the hot work alloy tool steels, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 258-263
1221. L.A. Dobrzański, M. Piec, K. Labisz, Z. Trojanova, J. Lelątko, A. Klimpel: Laser alloying and its effects on microstructure and properties of hot work tool steel, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 252-257
1222. L.A. Dobrzański, D. Pakuła, J. Mikuła, K. Lukaszkowicz: Corrosion resistance of coatings deposited by PVD and CVD techniques, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 246-251
1223. L.A. Dobrzański, J. Otręba, M. Actis Grande, M. Rosso: Mechanical and microctructural pro¬perties of Ni-Mo and Ni-Mo-W sintered steels, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 240-245
1224. L.A. Dobrzański, R. Maniara, J. Sokolowski, W. Kasprzak: Application of artificial neural networks for calculation of the solidus temperature for hypoeutectic aluminum silicon alloys, Proceedings of the 11th International Scientific Conference on the Contemporary Achie¬ve¬ments in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zako¬pane, 2005, pp. 234-239
1225. L.A. Dobrzański, M. Krupiński, J.H. Sokolowski, P. Zarychta, W. Kasprzak: The use of artificial intelligence methods for the identification of casting defects, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 229-233
1226. L.A. Dobrzański, A. Kloc, G. Matula, J.M. Contreras, J.M. Torralba: Effect of manufacturing methods on structure and properties of the gradient tool materials with the non-alloy matrix reinforced with the HS6-5-2 type high-speed steel, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 223-228
1227. L.A. Dobrzański, E. Jonda, A. Polok: Comparison of the abrasion wear resistance of the X40CrMoV5-1 and 55NiCrMoV7 hot work tool steel with their surface layer enriched with the ceramic powders, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 217-222
1228. L.A. Dobrzański, R. Honysz, S. Fassois: On the identification of composite beam dynamics based upon experimental data, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 207-216
1229. L.A. Dobrzański, K. Gołombek: TiN+gradient or multi(Ti,Al,Si)N+TiN coatings deposited on cermets by CAE process: characteristic of structure and properties, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 201-206
1230. L.A. Dobrzański, M. Drak: Permanent magnets Nd-Fe-B, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 193-200
1231. L.A. Dobrzański, J. Domagała, J.F. Silva: Filament winding of thermoplastic composites, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 187-192
1232. L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion resistance of sintered duplex stainless steels in the salt fog spray test, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 181-186
1233. M. Bonek, L.A. Dobrzański, E. Hajduczek, A. Klimpel: Laser modification of surface layer properties of a hot-work tool steel, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 107-110
1234. M. Bilewicz, L.A. Dobrzański, J.C. Viana, A.M. Cunha: Morphology diversity of injection moulded polymer composites, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S’2005, Gliwice – Zakopane, 2005, pp. 95-100
1235. B. Ziębowicz, D. Szewieczek, L.A. Dobrzański, J. Wysłocki, A. Przybył: Structure and properties of the composite materials consisting of the nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloy powders and polyethylene, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 727-730
1236. J. Trzaska, L.A. Dobrzański: Application of neural networks for designing the chemical com¬po¬sition of steel with the assumed hardness after cooling from the austenitising tempe¬rature, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 689-694
1237. M. Soković, J. Mikuła, L.A. Dobrzański, J. Kopač, L. Kosec, P. Panjan, J. Madejski, A. Piech: Cutting properties of the Al2O3+SiC(w) based tool ceramic reinforced with the PVD and CVD wear-resistant coatings, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 605-610
1238. W. Sitek, L.A. Dobrzański: Application of genetic methods in materials’ design, Proceedings of the 13th Inter-national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 589-592
1239. S. Rusz, M. Greger, L. Čížek, L.A. Dobrzański: Mathematical modeling for ECAP technology of multiple forming, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 559-564
1240. G. Matula, L.A. Dobrzański, A. Várez, B. Levenfeld, J.M. Torralba: Comparison of structure and properties of the HS12-1-5-5 type high-speed steel fabricated using the pressureless forming and PIM methods, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 419-422
1241. W. Kwaśny, L.A. Dobrzański: Structure, physical properties and fractal character of surface topography of the Ti+TiC coatings on sintered high speed steel, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 387-390
1242. J. Konieczny, L.A. Dobrzański, R. Nowosielski, J. Wysłocki, A. Przybył: Soft magnetic nanocomposite with powdered metallic ribbon based on cobalt and polymer matrix, Procee¬dings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 327-330
1243. A. Klimpel, L.A. Dobrzański, D. Janicki, A. Lisiecki: Abrasion resistance of GMA metal cored wires surfaced deposits, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 311-314
1244. L.A. Dobrzański, A. Włodarczyk, M. Adamiak: Structure, properties and corrosion resistance of PM composite materials based on EN AW-2124 aluminum alloy reinforced with the Al2O3 ceramic particles, Proceedings of the 13th Inter¬national Scientific Conference on Achieve¬ments in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 203-206
1245. L.A. Dobrzański, T. Tański, L. Čížek: Influence of modification with chemical elements on structure of magnesium casting alloys, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 199-202
1246. L.A. Dobrzański, A. Śliwa, W. Kwaśny: Employment of the Finite Element Method for deter¬mining stresses in coatings obtained on high speed steel with the PVD process, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 195-198
1247. L.A. Dobrzański, M. Sroka, A. Polok, A. Śliwa: Employment of the artificial neural networks for prediction of the mechanical properties of constructional steels, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 191-194
1248. L.A. Dobrzański, M. Polok, M. Adamiak: Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 187-190
1249. L.A. Dobrzański, M. Piec, K. Labisz, M. Bonek, A. Lisiecki, A. Klimpel: Laser treatment of surface layer over choosen hot work tool steels, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 183-186
1250. L.A. Dobrzański, D. Pakuła: Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramics, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 177-182
1251. L.A. Dobrzański, J. Mikuła: Structure and properties of PVD and CVD coated Al2O3+TiC mixed oxide tool ceramics for dry on high speed cutting processes, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 171-176
1252. L.A. Dobrzański, K. Lukaszkowicz, A. Zarychta, L. Cunha: Corrosion resistance of multilayer coatings deposited by PVD techniques onto the brass substrate, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 167-170
1253. L.A. Dobrzański, K. Labisz, R. Maniara: Microstructure investigations and hardness measurement in Al-Ti alloy with additions of Ce after heat treatment, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 161-166
1254. L.A. Dobrzański, M. Krupiński, P. Zarychta, J. Sokolowski, W. Kasprzak: Computer assisted classification of flaws identified with the radiographical methods in castings from the aluminium alloys, Proceedings of the 13th Inter-national Scientific Conference on Achieve¬ments in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 155-160
1255. L.A. Dobrzański, M. Kowalski, J. Madejski: Methodology of the mechanical properties prediction for the metallurgical products from the engineering steels using the Artificial Intelligence methods, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 151-154
1256. L.A. Dobrzański, W. Kasprzak, J. Sokolowski, R. Maniara, M. Krupiński: Applications of the derivation analysis for assessment of the ACAlSi7Cu alloy crystallization process cooled with different cooling rate, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 147-150
1257. L.A. Dobrzański, W. Kasprzak, J.H. Sokolowski: Design criteria used for optimization of the solution treatment for 3xxx series cast alloys, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 143-146
1258. L.A. Dobrzański, E. Jonda, A. Polok: Effect of laser treatment on changes of the surface layers properties of the hot work alloy tool steels, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 137-142
1259. L.A. Dobrzański, K. Gołombek: Structure and properties of the cutting tools made from cemented carbides and cermets with the TiN+mono, gradient or multi (Ti,Al,Si)N+TiN nanocrystalline coatings, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 131-136
1260. L.A. Dobrzański, A. Drygała: Laser texturisation of crystalline silicon for solar cells, Proceedings of the 13th Inter-national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 127-130
1261. L.A. Dobrzański, M. Drak, J. Trzaska: Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 121-126
1262. L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso, E.J. Pallavicini: Properties of vacuum sintered duplex stainless steels, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 117-120
1263. L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki: Comparison of the structures of the hot-work tool steels laser modified surface layers, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 113-116
1264. L. Čížek, M. Greger, R. Kocich, S. Rusz, I. Juřička, L.A. Dobrzański, T. Tański: Structure characteristics after rolling of magnesium alloys, Proceedings of the 13th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2005, Gliwice – Wisła, 2005, pp. 87-90
1265. J. Trzaska, L.A. Dobrzański: Modelling of transformations occuring during quenching in engineering steels, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.862, pp. 1-6
1266. L.A. Dobrzański, A. Włodarczyk, M. Adamiak: Corrosion resistance of the sintered composite materials with the ENAW-AlCu4Mg1(A) alloy matrix reinforced with Al2O3 and Ti(C,N), Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.803, pp. 1-4
1267. L.A. Dobrzański, M. Sroka, W. Sitek, M. Krupiński, J. Dobrzański: Computer aided classification of damage of steel working in creep conditions, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.834, pp. 1-4
1268. L.A. Dobrzański, G. Matula: Structure and properties of sintered high speed-steel HS6-5-2 type formed by injection moulding, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.806, pp. 1-4
1269. L.A. Dobrzański, K. Lukaszkowicz, A. Zarychta: Structure and properties of the anti-wear and corrosion resistant multilayer coatings deposited by PVD technique onto the brass substrate, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.859, pp. 1-6
1270. L.A. Dobrzański, M. Kremzer, A. Nagel, B. Huchler: Composite materials based on porous ceramic Al2O3 infiltrated by EN AC - AlSi12 alloy, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.835, pp. 1-4
1271. L.A. Dobrzański, M. Kowalski, J. Madejski: Application of the methods of artificial intelligence for prediction of properties of metallurgical products made of constructional steels, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.719, pp. 1-4
1272. L.A. Dobrzański, J. Mazurkiewicz, E. Hajduczek: 47CrMoWVTiCeZr16-26-8 hot-work tool steel, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.738, pp. 1-6
1273. L.A. Dobrzański, M. Drak: Hard magnetic composite materials Nd-Fe-B with addition of powder of iron ad high alloy steel X2CrNiMo17-1-2-2, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.742, pp. 1-4
1274. L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Corrosion resistance of sintered duplex stainless steels, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.744, pp. 1-4
1275. L.A. Dobrzański: Materials design as a main goal of materials engineering, Worldwide Congress on Materials and Manufacturing Engineering and Technology, COMMENT'2005, Congress proceedings – short papers, Gliwice – Wisła, 2005, CD-ROM, Ref. 4.875, pp. 1-8
1276. B. Ziębowicz, D. Szewieczek, L.A. Dobrzański: Structure and properties of the Fe73,5Cu1Nb3Si13,5B9 alloy powders bound with polyethylene, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 1077-1082
1277. W. Kwaśny, L.A. Dobrzański: Fractal nature of surface topography and physical properties of the TiN coatings obtained in the PVD process, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 551-556
1278. A. Drygała, L.A. Dobrzański: Materials for solar cells-state of the art and perspectives, Pro¬ceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 311-316
1279. L.A. Dobrzański, M. Piec: Structure and properties of aluminium alloys reinforced with the Al2O3 particles, Proceedings of the 12th International Scientific Conference on Achie¬vements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 271-276
1280. L.A. Dobrzański, D. Pakuła, A. Křiž: Tribological properties of the PVD and CVD coatings put down onto the nitride tool ceramics, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 267-270
1281. L.A. Dobrzański, J. Mikuła, D. Pakuła, J. Kopač, M. Soković: Cutting properties of the ceramic tool materials based on Si3N4 and Al2O3 coated with PVD and CVD Process, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 249-252
1282. L.A. Dobrzański, J. Mazurkiewicz, E. Hajduczek, P.Ociepka: Determination of the reduced stress and deformation that had occurred in the sample under thermal fatigue testing of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 241-244
1283. L.A. Dobrzański, G. Matula, G. Herranz, A.Várez, B. Levenfeld, J.M. Torralba: Injection Moulding of HS12-1-5-5 high-speed using a PW-HDPE based binder, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 237-240
1284. L.A. Dobrzański, K. Lukaszkowicz, A. Zarychta: Properties of the mono-layer ceramic coatings deposited by PVD process, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 233-236
1285. L.A. Dobrzański, W. Kasprzak, J.H. Sokolowski: Analysis of the Al-Si alloy structure develop¬ment using thermal analysis and rapid quenching techniques, Proceedings of the 12th Interna¬tio¬nal Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 225-228
1286. L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel: Employment of a high power diode laser for alloying the X40CrMoV5-1 steel surface layer with tungsten carbide, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 207-210
1287. L. Čížek, M. Greger, L. Pawlica, L.A. Dobrzański, T. Tański: Study of selected properties of magnesium alloy AZ91 after heat treatment and forming, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 165-169
1288. M. Actis Grande, D. Ugues, M. Rosso, L.A. Dobrzański, Z. Brytan: The PM route for duplex stainless steels, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2003, Gliwice – Zakopane, 2003, pp. 5-8
1289. L.A. Dobrzański, J. Trzaska: Application of neural networks for forecasting the CCT curves for constructional steels, Proceedings of the 11th International Scientific Conference on Achie¬vements in Mechanical and Materials Engineering, AMME’2002, Gliwice – Zakopane, 2002, pp. 143-148
1290. L.A. Dobrzański, J. Mazurkiewicz, E. Hajduczek, M. Bonek: Characteristics of the 47CrMoWVTiCeZr16-26-8 hot-work tool steel, Proceedings of the 11th International Scien¬tific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Gliwice – Zakopane, 2002, pp. 125-130
1291. L.A. Dobrzański, G. Matula, J.M. Torralba, B. Levenfeld, A. Várez: Structure and properties of high speed steels formed from powders, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Gliwice – Zakopane, 2002, pp. 119-124
1292. L.A. Dobrzański, K. Lukaszkowicz, K. Labisz, L. Cunha: Structure of the PVD coatings depo¬sited using the reactive magnetron sputtering method, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Gliwice – Zakopane, 2002, pp. 109-114
1293. L.A. Dobrzański, W. Kwaśny, Z. Brytan: Effect of the substrate bias on structure and pro¬perties of the Ti+Ti(C,N) coatings obtained in the PVD process, Proceedings of the 11th Inter¬national Scientific Conference on Achievements in Mechanical and Materials Engi¬neering, AMME’2002, Gliwice – Zakopane, 2002, pp. 103-108
1294. L.A. Dobrzański, W. Kasprzak, J.H. Sokolowski: The effect of the solidification shrinkage and heat treatment process on the structural damage of the interface between the 319 alloy and cast iron, Proceedings of the 11th International Scientific Conference on Achievements in Mecha¬nical and Materials Engineering, AMME’2002, Gliwice – Zako¬pane, 2002, pp. 93-96
1295. L.A. Dobrzański, K. Gołombek: The effect of deposition of the anti-wear coatings of the TiN+TiAlSiN+TiN type on working properties of tool cermets, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engi¬neering, AMME’2002, Gliwice – Zakopane, 2002, pp. 87-92
1296. L.A. Dobrzański, M. Bonek, A. Klimpel, A. Lisiecki, S. Bugliosi: Tribological properties of the surface layer of the X40CrMoV5-1 steel remelted using the high power diode laser (HPDL), Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Gliwice – Zako-pane, 2002, pp. 77-82
1297. M. Adamiak, J.B. Fogagnolo, E.M. Ruiz-Navas, L.A. Dobrzański, J.M. Torralba: Structure and properties of AA6061/(Ti3Al)p composite materials obtained by mechanical milling and hot extrusion, Proceedings of the 11th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2002, Gliwice – Zako¬pane, 2002, pp. 13-16
1298. L.A. Dobrzański, K. Labisz, A. Olsen, P. Zagierski: Precipitation processes occurring during heat treatment of the newly developed Al-Mg-Cu-Zn alloy for car chassis, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Gliwice – Zakopane, 2001, pp. 645-650
1299. M. Soković, J. Kopač, L.A. Dobrzański, J. Torralba: Wear of PVD coated solid carbide end mills in dry high-speed cutting (HSC), Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Gliwice – Zakopane, 2001, pp. 531-534
1300. M. Adamiak, J. Fogagnolo, E. Ruiz-Navas, L.A. Dobrzański, J. Torralba: PM AA6061/(Ti3Al)p composite powder obtained by mechanical milling, Proceedings of the 10th Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’2001, Gliwice – Zakopane, 2001, pp. 15-18
1301. L.A. Dobrzański, M. Soković, L. Kosec: Diffusion across PVD coated cermet tool/workpiece interface, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Ma¬terials Engineering, AMME’2000, Gliwice – Sopot – Gdańsk, 2000, pp. 499-502
1302. L.A. Dobrzański, G. Matula, A. Várez, J.M. Torralba: The structure and mechanical properties of HSS M2 type steel produced by modified powder injection moulding process, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Ma¬terials Engineering, AMME’2000, Gliwice – Sopot – Gdańsk, 2000, pp. 143-146
1303. L.A. Dobrzański, W. Kasprzak: The effect of tungsten, molybdenum and cobalt on the erosion resistance of selected high-speed steels, Pro¬cee¬dings of the 8th International Scientific Conference on Achievements in Mechanical and Ma¬terials Engineering, AMME’99, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, s. 151-154
1304. L.A. Dobrzański: Curriculum assumptions of the newly created branch of studies concerning management and manufacturing engineering, Proceedings of the 8th International Scientific Conference on Achievements in Mechanical and Ma¬terials Engineering, AMME’99, Gliwice – Rydzyna – Rokosowo – Pawłowice, 1999, pp. 135-142
1305. L.A. Dobrzański, W. Kasprzak: The effect of cobalt and molybdenum on structure, cutting ability, and erosion resi-stance of the W-V+Mo and Co high-speed steel, Pro¬cee¬dings of the 7th International Scientific Conference on Achie¬vements in Me¬chanical and Mate¬rials Engineering, AMME’98, Gliwice – Zakopane, 1998, pp. 119-129
1306. L.A. Dobrzański, M. Adamiak, W. Kasprzak: Structure and properties of the heat-treated and PVD coated W-Mo-V-Co high-speed steel of the 9-2-2-5 type, Pro¬cee¬dings of the 7th International Scientific Conference on Achie-vements in Me¬chanical and Mate¬rials Engineering, AMME’98, Gliwice – Zakopane, 1998, pp. 107 110
1307. L.A. Dobrzański: Development trends of didactic curricula and scientific research carried out by the Institute of Engineering Materials and Biomaterials of Silesian Technical University in Gliwice, Workshop on Materials and Manufacturing Engineering in Modern Branches of Study, Proceedings of the Workshop, EUINTEGRATION, vol. 1, Gliwice, Leganes, Dublin, Guimaraes, Manchester, Orbassano, 1998, pp. 29-74
1308. L.A. Dobrzański: Structure and properties of high-speed steels, Proceedings of the Work¬shops on Development, Testing and Processing of Contemporary Functional, Con¬stru¬ctional, and Tool Materials, vol. 2, Gliwice, Rousse, Miskolc, Bratislava, Ljubljana, Plzeň, 1997, pp. 1-46
1309. L.A. Dobrzański: Technical and economical issues of materials selection, Proceedings of the Workshop on Development, Testing, and Processing of Contemporary Functional, Constru¬ctional, and Tool Materials, vol. 1, Gliwice, Rousse, Miskolc, Bratislava, Ljubljana, 1997, pp. 1 30
1310. L.A. Dobrzański, M. Adamiak, W. Kasprzak: High-speed steel of the 11-2-2-5+Si type heat treated and coated in the PVD process, Proceedings of the International Conference Challenges to Civil and Mechanical Engineering in 2000 and Beyond, CCME’97, vol. II, Wro¬cław, 1997, pp. 305-316
1311. L.A. Dobrzański, W. Stefaniak: A finite element simulation for metal flow, Proceedings of the 5th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’96, Extended abstracts volume, Gliwice – Wisła, 1996, pp. 103-106
1312. L.A. Dobrzański, E. Hajduczek, A. Zarychta, M. Ligarski: The influence of Nb or Ti on the chemical and phase compositions of carbides in W-Mo-V high speed steels of 11-0-2 type, Proceedings of the 9th Conference on Electron Microscopy of Solids, EM’96, Kraków – Zakopane, 1996, pp. 137-140
1313. L.A. Dobrzański, A. Zarychta, E. Hajduczek: The effect of partial substitution of V by Nb on chemical composition of primary carbides in W Mo-V+Si+Nb high-speed steels of the 11-0-2 type, Proceedings of the 4th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’95, "Extended abstracts" volume, Gliwice – Wisła, 1995, pp. 97-100
1314. L.A. Dobrzański, M. Ligarski: Role of Ti in the W-Mo-V high-speed steels, Proceedings of the 4th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’95, "Extended abstracts" volume, Gliwice – Wisła, 1995, pp.87-90
1315. L.A. Dobrzański, J. Dobrzański, J. Madejski, J. Zacłona: Computer-based system for assisting maintenance and investigations of power instal¬lations’ elements, Proceedings of the 4th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME’95, "Extended abstracts" volume, Gliwice – Wisła, 1995, pp. 79-82
1316. L.A. Dobrzański, J. Dobrzański, J. Madejski, J. Zacłona: The evaluation of the extent of damage as the base for forecasting of the residual life of pressure loaded power installation elements, Proceedings of the International Conference on Central European and World Connection Electric Power Industry, Forum’95, Kraków, 1995, pp. 101-112
1317. L.A. Dobrzański, A. Zarychta, M. Ligarski: Phase transformations during heat treatment of W Mo-V 11-2-2 type high-speed steels with increased contents of Si and Nb or Ti, Proceedings of the 14th International Scientific Conference on Advanced Materials & Techno¬logies, AMT’95, Gliwice – Zakopane, 1995, "Extended Abstracts" Volume, pp. 117-120
1318. L.A. Dobrzański, W. Sitek: Computer aided system for constructional steel selection, Proceedings of the 14th International Scientific Conference on Advanced Materials & Techno¬logies, AMT’95, Gliwice – Zakopane, 1995, "Extended Abstracts" Volume, pp. 113-116
1319. L.A. Dobrzański, W. Sitek: Comparison of hardenability calculation methods of the heat-treatable constructional steels, Proceedings of the 14th International Scientific Conference on Advanced Materials & Technologies, AMT’95, Gliwice – Zako¬pane, 1995, "Scripta" Volume, pp. 57-66
1320. L.A. Dobrzański, J. Zacłona: Computer aided system for high-speed steel selection, Procee¬dings of the 14th International Scientific Conference on Advanced Materials & Technologies, AMT’95, Gliwice – Zakopane, 1995, "Scripta" Volume, pp. 51-56
1321. L.A. Dobrzański, W. Kasprzak, A. Zarychta, M. Ligarski, J. Mazurkiewicz: Structure and properties of W-Mo-V-Co 11-0-2-5 type and W-Mo-V 11-0-2 type high-¬speed steels, Pro¬ceedings of the 14th International Scientific Conference on Advanced Materials & Techno¬logies, AMT’95, Gliwice – Zakopane, 1995, "Scripta" Volume, pp. 43-49
1322. L.A. Dobrzański, E. Hajduczek, A. Zarychta: Hot deformability of W-Mo-V 7-12-0-2, 9-2-2 and 11-2-2 high - speed steels with increased Si, Nb or Ti contents, Procee¬dings of the I-st Interna¬tional Scientific Conference on Achievements in the Mechanical and Material Engi¬neering, Gliwice, 1992, Vol. 1, pp. 35-48