916. L.A. Dobrzański, W. Wolany. Biomaterials manufacturing using SLS method, 20th Jubilee international seminar of Ph.D. students, SEMDOK 2015, Terchova, Slovakia, 2015, pp. 109-112
917. B. Nieradka, I. Czaja, L.A. Dobrzański: Synthesis and morphology analysis of composite nanofibers, 20th Jubilee international seminar of Ph.D. students, SEMDOK 2015, Terchova, Slovakia, 2015, pp. 85-88
918. L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, D. Łukowiec. Research methodology laser sintered biomaterials, 20th Jubilee international seminar of Ph.D. students, SEMDOK 2015, Terchova, Slovakia, 2015, pp. 57-66
919. L.A. Dobrzański, T. Tański, W. Pakieła, K. Labisz, M. Bonek: The structure and properties of aluminium alloy after laser treatment, 19th International seminar of Ph.D. students, SEMDOK 2014, Terchova, Slovakia, 2014, pp. 76-79
920. L.A. Dobrzański, M. Szindler, M.M. Szindler: Atomic layer deposition method for optical thin films application, 19th International seminar of Ph.D. students, SEMDOK 2014, Terchova, Slovakia, 2014, pp. 64-67
921. M. Kujawa, M. Kremzer, L.A. Dobrzański: Manufacturing of aluminium matrix composite with gas pressure infiltration method, 19th International seminar of Ph.D. students, SEMDOK 2014, Terchova, Slovakia, 2014, pp. 38-41
922. M. Czaja, W. Borek, L.A. Dobrzański: Structure of X11MnSiAl17-1-3 steel after thermo-plastic deformation on LPS module for semi-industrial simulation of hot-rolling, 19th International seminar of Ph.D. students, SEMDOK 2014, Terchova, Slovakia, 2014, pp. 26-29
923. I. Czaja, A. Hudecki, L.A. Dobrzański: Examination of selected surface properties of solids by gas adsorption, 19th International seminar of Ph.D. students, SEMDOK 2014, Terchova, Slovakia, 2014, pp. 22-25
924. L.A. Dobrzański, A. Dobrzańska-Danikiewicz, T. Tański, W. Sitek: Surface engineering development perspectives identified on the basis of technology foresight results, 2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering, Proceedings, Dubrovnik – Cavtat, Croatia, 2013, pp. 61-68
925. M. Musztyfaga, L.A. Dobrzański, S. Rusz, L. Prokop, S. Misak: The use of conventional technique to shape the properties of the front side metallization of monocrystalline solar cell and its structure, Proceedings of the 14th International Scientific Conference Electric Power Engineering 2013, Kouty nad Desnou, Czech Republic, 2013, pp. 503-506
926. Ł. Reimann, L.A. Dobrzański: Forming the CoCrMo alloys properties by casting conditions, 18th International of PhD. students' seminar, SEMDOK 2013, Terchova, Slovakia, 2013, pp. 56-61
927. M. Czaja, W. Borek, L.A. Dobrzański: Structure and properties of high-manganese austenitic TRIP type steel X11MnSiAl17-1-3, 18th International of PhD. students' seminar, SEMDOK 2013, Terchova, Slovakia, 2013, pp. 18-21
928. L.A. Dobrzański, M. Górniak: In situ synthesis of methyl methacrylate based nanocomposite materials, 18th International of PhD. students' seminar, SEMDOK 2013, Terchova, Slovakia, 2013, pp. 1-4
929. L.A. Dobrzański, W. Borek: Structure and properties of high manganese TWIP, TRIP & TRIPLEX steels, Proceedings of the 11th Global Congress on Manufacturing and Management (GCMM2012), Auckland, New Zealand, 2012, pp. 1-10
930. L.A. Dobrzański, R. Honysz: Virtual Examinations of Heat Treatment Influence on Structural Steels Mechanical Properties, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 1450-1457
931. G. Matula, L.A. Dobrzański, M. Ambroziak: Simulation of Powder Injection Moulding Conditions Using Cadmould Program, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 1176-1182
932. L.A. Dobrzański, M. Bilewicz: Reinforcement of Polymer Nanocomposites by Injection Moulding, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 1102-1110
933. L.A. Dobrzański, A.E. Tomiczek, A.W. Pacyna: Properties of Magnetostrictive Composite Materials with Polyurethane Matrix Reinforced with Terfenol-D Particles, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 1068-1076
934. L.A. Dobrzański, M. Kremzer, M. Dziekońska: Possibility of Wettability Improvement of Al2O3 Preforms Infiltrated by Liquid Aluminium Alloy by Deposition Ni-P Coating, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 1019-1029
935. L.A. Dobrzański, M. Musztyfaga, M. Staszuk: Metallisation Technology of Silicon Solar Cells Using the Conventional and Laser Technique, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 789-798
936. L.A. Dobrzański, B. Tomiczek, M. Adamiak, K. Gołombek: Mechanically Milled Aluminium Matrix Composites Reinforced with Halloysite Nanotubes, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 781-788
937. L.A. Dobrzański, Ł. Reimann, C. Krawczyk: Heat Treatment Remanium 2000+ Cobalt Alloy Used as Substrate on Dentures, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 598-605
938. L.A. Dobrzański, M. Górniak, Ł. Reimann, M. Staszuk: Characterization of Aluminosilicate Nanoparticles as a Reinforcement in Composite Materials Based on Polymeric Matrix, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 313-319
939. L.A. Dobrzański, M. Staszuk, R. Honysz: Analysis of PVD and CVD Coatings Properties Influence on Durability of the Cutting Edge, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, pp. 169-175
940. B. Tomiczek, L.A. Dobrzański: Halloysite as a reinforcement of aluminium matrix composites, Proceedings of the International Forum of Young Researchers, (Problemy Nedropol’zovaniâ, Meždunarodnyj Forum-Konkurs Molodyh Učenyh, Sbornik Naučnyh Trudov, Sankt-Peterburg), St Petersburg, Russia, 2012, Part II, pp. 25-27
941. M. Król, L.A. Dobrzański: Thermal analysis of magnesium alloy, Proceedings of the International Forum of Young Researchers, (Problemy Nedropol’zovaniâ, Meždunarodnyj Forum-Konkurs Molodyh Učenyh, Sbornik Naučnyh Trudov, Sankt-Peterburg), St Petersburg, Russia, 2012, Part II, pp. 12-13
942. L.A. Dobrzański, Ł. Reimann: Influence of cobalt and chromium on properties of cobalt base alloys, Proceedings of the International Forum of Young Researchers, (Problemy Nedropol’zovaniâ, Meždunarodnyj Forum-Konkurs Molodyh Učenyh, Sbornik Naučnyh Trudov, Sankt-Peterburg), St Petersburg, Russia, 2012, Part II, pp. 7-10
943. L.A. Dobrzański, W. Borek: Structures and properties of high-manganese austenitic steel, Proceedings of the International Forum of Young Researchers, (Problemy Nedropol’zovaniâ, Meždunarodnyj Forum-Konkurs Molodyh Učenyh, Sbornik Naučnyh Trudov, Sankt-Peterburg), St Petersburg, Russia, 2012, Part II, pp. 5-7
944. L.A. Dobrzański, M. Musztyfaga, A. Drygała: Front side metallization techniques for monocrystalline silicon solar cells, Conference Proceedings, 8th International Conference on Industrial Tools and Material Processing Technologies, ICIT&MPT 2011, Ljubljana, Slovenia, 2011, pp. 353-358
945. L.A. Dobrzański, Ł. Reimann: Corrosion resistance of base metals alloys used on dentures, Conference Proceedings, 8th International Conference on Industrial Tools and Material Processing Technologies, ICIT&MPT 2011, Ljubljana, Slovenia, 2011, pp. 309-314
946. L.A. Dobrzański, A. Tomiczek, B. Ziębowicz, A. Nabiałek: Influence of the manufacturing technology on the properties of magnetostrictive composite materials, Conference Proceedings, 8th International Conference on Industrial Tools and Material Processing Technologies, ICIT&MPT 2011, Ljubljana, Slovenia, 2011, pp. 303-308
947. L.A. Dobrzański, B. Tomiczek, M. Adamiak, M. Górniak: Application of halloysite nanotubes in aluminum matrix composites, Conference Proceedings, 8th International Conference on Industrial Tools and Material Processing Technologies, ICIT&MPT 2011, Ljubljana, Slovenia, 2011, pp. 289-296
948. L.A. Dobrzański, M. Bonek, K. Labisz: Effect of laser surface alloying on structure of a commercial tool steel, Conference Proceedings, 8th International Conference on Industrial Tools and Material Processing Technologies, ICIT&MPT 2011, Ljubljana, Slovenia, 2011, pp. 235-241
949. L.A. Dobrzański, W. Borek: Hot-rolling of high-manganese Fe-Mn-(Al, Si) TWIP steels, Conference Proceedings, 8th International Conference on Industrial Tools and Material Processing Technologies, ICIT&MPT 2011, Ljubljana, Slovenia, 2011, pp. 117-120
950. E. Tillová, M. Chalupová, L.A. Dobrzański: Microstructure and mechanical properties of heat treated (T4) AlSi12Cu1Fe cast alloy, Degradácia Konštrukčných Materiálov 2011, XII. vedecká konferencia so zahraničnou účasťou, Zborník prednasok, Terchová – Biely Potok, Žilina, Slovakia, 2011, pp. 152-157
951. L.A. Dobrzański, M. Król, M. Bonek, M. Chalupová: Definition of magnesium alloy structure by quantity evaluation, Degradácia Konštrukčných Materiálov 2011, XII. vedecká konferencia so zahraničnou účasťou, Zborník prednasok, Terchová – Biely Potok, Žilina, Slovakia, 2011, pp. 38-43
952. L.A. Dobrzański, T. Tański, S. Malara: Corrosion resistance of the Mg-Al alloys after the heat and surface laser treatment, Degradácia Konštrukčných Materiálov 2011, XII. vedecká konferencia so zahraničnou účasťou, Terchová – Biely Potok, Žilina, Slovakia, 2011, pp. 31-37
953. L.A. Dobrzański, A. Drygała: Influence of laser processing on multicrystalline silicon surface, Proceedings of the 7th International Conference on Processing & Manufacturing of Advanced Materials THERMEC’2011, Quebec, Canada, 2011
954. K. Labisz, L.A. Dobrzański, M. Bonek: Wear resistance measurement of laser treated tool steel surface layer, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 195-196
955. L.A. Dobrzański, B. Ziębowicz, M. Dziekońska: Structure and properties of functional composite materials based on the nanocrystalline Nd-Fe-Co-B powder with polymer matrix, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 176-177
956. L.A. Dobrzański, M. Staszuk: The investigations of PVD coatings deposited onto edges of sintered cutting tools, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 174-175
957. L.A. Dobrzański, Ł. Reimann: Metallic materials used in dentistry, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 172-173
958. L.A. Dobrzański, A.J. Nowak, T. Rosikoń: Application of computer simulations based on Finite Element Method in materials engineering, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 170-172
959. L.A. Dobrzański, M. Musztyfaga, A. Drygała: A comparative study of both selective laser sintered and screen printed front contacts on monocrystalline silicon solar cells, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 168-170
960. L.A. Dobrzański, R. Honysz: Artificial intelligence and virtual environment application for materials design methodology, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 166-168
961. L.A. Dobrzański, A. Drygała, M. Macek: Technology of crystalline silicon solar cells, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 165-166
962. L.A. Dobrzański, W. Borek: Influence of hot-working conditions on a structure of C-Mn-Si-Al TWIP steel, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 163-164
963. L.A. Dobrzański, M. Bilewicz: In-mould manipulation of injection moulded polymer nanocomposites, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 161-162
964. Z. Brytan, L.A. Dobrzański, W. Pakieła: Sintered stainless steel with enhanced surface layer properties by HPDL remelting and alloying, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 152-153
965. M. Bonek, G. Matula, L.A. Dobrzański: Effect of laser surface melting on structure of a commercial tool steel, VIII Ukrainian-Polish Conference of Young Scientists, Mechanics and Computer Science, Abstract of scientific paper, (VIII Ukraïns΄ko-Pol΄s΄ka Konferencìâ Molodih Naukovcìv „Mehanìka ta Ìnformatika”, Tezi naukovih prac΄), Khmelnitsky, Ukraine, 2011, pp. 148-150
966. L.A. Dobrzański: Gradient PVD and CVD coatings on the cutting sintered tools, Proceedings of the 6th COBEF – Brazilian Conference on Manufacturing Engineering, Caxias do Sul, Brazil, 2011
967. L.A. Dobrzański, R. Honysz: The Materials Science Virtual Laboratory Project, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 1453-1460
968. L.A. Dobrzański, M. Kremzer, M. Adamiak: The influence of reinforcement shape on tribological properties of aluminium matrix composites manufactured by pressure infiltration, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 1437-1445
969. L.A. Dobrzański, M. Staszuk, M. Pawlyta, J. Konieczny: Structure and properties of (Ti,Al)N and (Al,Ti)N coatings obtained by PVD process onto sintered carbide and sialon tool ceramics, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 1287-1294
970. L.A. Dobrzański, A. Śliwa, L.W. Żukowska, J. Mikuła, K. Gołombek: Properties of (Ti,Al)N, Ti(C,N) and (Ti,Al,Si)N coatings for tool materials, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 1182-1190
971. K. Lukaszkowicz, L.A. Dobrzański, J. Szewczenko: Microstructure and corrosion resistance of nanocomposite coatings deposited by cathodic arc evaporation method, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 947-954
972. J. Konieczny, A. Borisjuk, M. Pashechko, L.A. Dobrzański: Magnetic properties of Co-based amorphous alloy under cyclic heating and cooling, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 884-889
973. Z. Brytan, M. Bonek, L.A. Dobrzański: Laser surface remelting of sintered stainless steels, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 868-876
974. L.A. Dobrzański, M. Musztyfaga, A. Drygała: Laser micro-processing of crystalline silicon for solar cells, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 857-867
975. T. Tański, L.A. Dobrzański, K. Labisz: Investigation of the microstructure characteristic of chosen magnesium alloys, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 761-768
976. B. Krupińska, K. Labisz, L.A. Dobrzański, Z. Rdzawski: Influence of alloying additives on the crystallisation kinetics of the cast zinc alloy, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 724-730
977. L.A. Dobrzański, A. Pusz, A.J. Nowak, M. Górniak: Examples of FEM applications to analysis the chosen issues from material engineering, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 556-564
978. A. Włodarczyk-Fligier, L.A. Dobrzański, M. Adamiak: Corrosion resistance of the sintered composite materials with the EN AW-AlCu4Mg1(A) alloy matrix reinforced with Al2O3 and Ti(C,N) ceramic particles, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 334-341
979. M. Krupiński, K. Labisz, L.A. Dobrzański, Z. Rdzawski: Computer aided microstructure analysis of the Al-Si-Cu cast alloy cooled with different cooling rates, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 320-326
980. M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak: Comparison of the PVD coatings deposited onto plasma nitrited hot work tool steel, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 305-312
981. L.A. Dobrzański, E. Jonda, K. Labisz, M. Bonek, A. Klimpel: Abrasive wear resistance of the hot work tool steels remelted or alloyed by HPDL laser, Proceedings of 13th International Materials Symposium, IMSP’2010, Denizli, Turkey, 2010, pp. 49-55
982. L.A. Dobrzański, R. Honysz: The Materials Science Virtual Laboratory Project, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 1453-1460
983. L.A. Dobrzański, M. Kremzer, M. Adamiak: The influence of reinforcement shape on tribological properties of aluminium matrix composites manufactured by pressure infiltration, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 1437-1445
984. L.A. Dobrzański, M. Staszuk, M. Pawlyta, J. Konieczny: Structure and properties of (Ti,Al)N and (Al,Ti)N coatings obtained by PVD process onto sintered carbide and sialon tool ceramics, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 1287-1294
985. L.A. Dobrzański, A. Śliwa, L.W. Żukowska, J. Mikuła, K. Gołombek: Properties of (Ti,Al)N, Ti(C,N) and (Ti,Al,Si)N coatings for tool materials, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 1182-1190
986. K. Lukaszkowicz, L.A. Dobrzański, J. Szewczenko: Microstructure and corrosion resistance of nanocomposite coatings deposited by cathodic arc evaporation, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 947-954
987. J. Konieczny, A. Borisjuk, M. Pashechko, L.A. Dobrzański: Magnetic properties of Co-based amorphous alloy under cyclic heating and cooling, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 884-889
988. L.A. Dobrzański, M. Musztyfaga, A. Drygała: Laser micro-processing of crystalline silicon for solar cells, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 857-867
989. T. Tański, L.A. Dobrzański, K. Labisz: Investigation of the microstructure characteristic of chosen magnesium alloys, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 761-768
990. B. Krupińska, K. Labisz, L.A. Dobrzański, Z. Rdzawski: Influence of alloying additives on the crystallisation kinetics of the cast zinc alloy, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 724-730
991. L.A. Dobrzański, A. Pusz, A.J. Nowak, M. Górniak: Examples of FEM applications to analysis the chosen issues from material engineering, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 556-564
992. A. Włodarczyk-Fligier, L.A. Dobrzański, M. Adamiak: Corrosion resistance of the sintered composite materials with the EN AW-AlCu4Mg1(A) alloy matrix reinforced with Al2O3 and Ti(C,N) ceramic particles, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 334-341
993. M. Krupiński, K. Labisz, L.A. Dobrzański, Z. Rdzawski: Computer aided microstructure analysis of the Al-Si-Cu cast alloy cooled with different cooling rates, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 320-326
994. M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak: Comparison of the PVD coatings deposited onto plasma nitrited hot work steel, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 305-312
995. L.A. Dobrzański, W. Borek: Hot-working of advanced high-manganese C-Mn-Si-Al steel, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 65-67
996. L.A. Dobrzański, Z. Brytan, M. Bonek: Laser surface remelting of wrought and sintered austenitic stainless steel, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 62-64
997. L.A. Dobrzański, E. Jonda, K. Labisz, M. Bonek, A.S. Klimpel: Abrasive wear resistance of the hot work tool steels remelted or alloyed by HPDL laser, Modern Achievements of Science and Education. IV International Conference, Budva, Montenegro, 2010, pp. 49-55
998. L.A. Dobrzański, A. Drygała, Multicrystalline silicon laser texturisation for photovoltaics, Proceedings of the 5th International Ege Energy Symposium and Exhibition, IEESE-5, Denizli, Turkey, 2010
999. L.A. Dobrzański, W. Borek: Hot-working of advanced high-manganese C-Mn-Si-Al steel, Proceedings of International Conference on Science and Education, Colombo, Sri Lanka, 2010, pp. 65-67
1000. Z. Brytan, M. Bonek, L.A. Dobrzański: Laser surface remelting of wrought and sintered austenitic stainless steel, Proceedings of International Conference on Science and Education, Colombo, Sri Lanka, 2010, pp. 62-64
1001. D. Pakuła, A. Križ, M. Staszuk, L.A. Dobrzański: Structure and properties of PVD coatings deposited on the nitride ceramic base, 8th Conference on Coatings and Layers 2009, Rožnov pod Radhoštěm, Czech Republic, 2009, pp. 83-88
1002. W. Sitek, J. Trzaska, L.A. Dobrzański: Computer simulation of the chemical composition effect on steels' properties, Proceedings of the International Conference of IFHTSE 2009 “New Challenges in Heat Treatment and Surface Engineering”, Dubrovnik – Cavtat, Croatia, 2009, pp. 315-320
1003. L.A. Dobrzański, T. Tański, J. Domagała, S. Malara, A. Klimpel: Laser surface treatment of Mg-Al-Zn alloys, Pro-ceedings of the International Conference of IFHTSE 2009 “New Challenges in Heat Treatment and Surface Engineering”, Dubrovnik – Cavtat, Croatia, 2009, pp. 179-184
1004. L.A. Dobrzański, A. Kloc-Ptaszna, G. Matula: Properties of sintered gradient tool WC/HS6-5-2 materials, Proceedings of the 2th International Conferencee on Modern Achievements of Science and Education, Netanya, Israel, 2008, pp. 71-76
1005. L.A. Dobrzański, J. Domagała, T. Tański, A. Klimpel, D. Janicki: Laser surface treatment of magnesium alloy with side injection of titanium carbide, Proceedings of the 2th International Conference on Modern Achievements of Science and Education, Netanya, Israel, 2008, pp. 67-71
1006. L.A. Dobrzański, R. Honysz: On the Implementation of Virtual Machines in Computer Aided Education, Proceedings of the International Conference on Electronic Materials, IUMRS-ICEM 2008, Sydney, Australia, 2008, CD-ROM
1007. L.A. Dobrzański, M. Kremzer, A. Nagel: Influence of reinforcements shape on the structure and properties of Al-Al2O3 composite materials, 11th International Research/Expert Conference, Trends in the development of machinery and associated technology, TMT 2007, Proceedings, Hammamet, Tunisia, 2007, pp. 1479-1482
1008. M. Krupiński, L.A. Dobrzański, J. Sokolowski: Metallographic investigations of automotive Al-Si cast components, 11th International Research/Expert Conference, Trends in the development of machinery and associated technology, TMT 2007, Proceedings, Hammamet, Tunisia, 2007, pp. 215-218
1009. L.A. Dobrzański, K. Lukaszkowicz: Tribological behaviour of coatings deposited by reactive magnetron sputtering method, 11th International Research/Expert Conference, Trends in the development of machinery and associated technology, TMT 2007, Proceedings, Hammamet, Tunisia, 2007, pp. 51-54
1010. L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła: Multilayer and gradient PVD coatings on the sintered tool materials, 11th International Research/Expert Conference, Trends in the development of machinery and associated technology, TMT 2007, Proceedings, Hammamet, Tunisia, 2007, pp. I-1-I-28
1011. M. Krupiński, L.A. Dobrzański, J. Sokolowski: Use of artificial intelligence methods for the classification of casting defect, 24th International Manufacturing Conference, IMC 24, Manufacturing – Focus on the Future, Waterford, Ireland, 2007, Vol. 2, pp. 901-908
1012. L.A. Dobrzański, A. Kloc-Ptaszna, A. Dybowska, G. Matula, E. Gordo, J. Torralba: Structure and properties of the gradient tool materials of HS6-5-2 high-speed steel matrix reinforced by VC carbide, 24th International Manufacturing Conference, IMC 24, Manufacturing – Focus on the Future, Waterford, Ireland, 2007, Vol. 2, pp. 829-836
1013. M. Bonek, L.A. Dobrzański: Microstructural and tribological characterization of hot-work tool steel modified by laser alloying, 24th International Manufacturing Conference, IMC 24, Manufacturing – Focus on the Future, Waterford, Ireland, 2007, Vol. 2, pp. 805-812
1014. L.A. Dobrzański, T. Tański: Influence of the chemical composition and precipitation processes on the structure and properties of the magnesium cast alloys, 24th International Manufacturing Conference, IMC 24, Manufacturing – Focus on the Future, Waterford, Ireland, 2007, Vol. 1, pp. 499-505
1015. L.A. Dobrzański, B. Ziębowicz, M. Drak: Possibilities of the application of new composite materials with specific magnetic properties, 24th International Manufacturing Conference, IMC 24, Manufacturing – Focus on the Future, Waterford, Ireland, 2007, Vol. 1, pp. 87-92
1016. M. Bonek, L.A. Dobrzański: Characterization and performance of laser melted commercial tool steels, International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2007, Algarve, Portugal, 2007, CD-ROM
1017. J. Konieczny, L.A. Dobrzański, A. Przybył: Softmagnetic composite materials polymer – particles powder Co68Fe4Mo1Si13.5B13.5 alloy, 13th International Symposium on Metallography, Stara Lesna, Slovak Republic, 2007, pp. 842-847
1018. L.A. Dobrzański, M. Drak. J. Trzaska: Computer simulation of hard magnetic composite materials Nd-Fe-B properties, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 483-488
1019. J. Trzaska, L.A. Dobrzański: Modelling of CCT diagrams for engineering and constructional steels, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 457-462
1020. L.A. Dobrzański, R. Maniara, J. Sokolowski, W. Kasprzak, M. Krupiński, Z. Brytan: Applications of the artificial intelligence methods for modeling of the ACAlSi7Cu alloy crystallization process, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 175-180
1021. L.A. Dobrzański, T. Tański, L. Cížek, Z. Brytan: Structure and properties of magnesium cast alloys, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 159-167
1022. L.A. Dobrzański, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Structure and Properties of Gradient Tool Materials with HS6-5-2 High-Speed Steel, 7th Asia Pacific Conference on Materials Processing, APCMP 2006, Singapore, 2006, pp. 128-133
1023. L.A. Dobrzański, R. Honysz, Z. Brytan: Concept of distance learning based on course management system applied in Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice, Poland, Proceedings of the 20th International Conference on Scientific Data and Knowledge within the Information Society, CODATA 2006, Beijing, China, 2006, CD-ROM
1024. W. Kwaśny, K. Gołombek, L.A. Dobrzański: Multifractal characteristic of surface topography of the coatings on cemented carbides, 15th Congress of International Federation for Heat Treatment and Surface Engineering, Vienna, Austria, 2006, pp. 532-537
1025. L.A. Dobrzański, Z. Brytan, M. Rosso, M. Actis Grande: Sintered duplex stainless steels and their properties, 15th Congress of International Federation for Heat Treatment and Surface Engineering, Vienna, Austria, 2006, pp. 462-467
1026. L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Sintered duplex stainless steels corrosion properties, Proceedings of the 2006 Powder Metallurgy, World Congress & Exhibition, PM 2006, Busan, Korea, 2006, CD-ROM
1027. L.A. Dobrzański, M. Kremzer: Structure and properties of EN AC-AlSi12 alloy reinforced by ceramic fibres and particles, Proceedings of the 2006 Powder Metallurgy, World Congress & Exhibition, PM 2006, Busan, Korea, 2006, CD-ROM
1028. L.A. Dobrzański, W. Hufenbach, M. Gude, A. Czulak, M. Stach, J. Konieczny, Optimisation of the rivet joint of the cerp composite material and 6061 aluminium alloy, 13th International Science and Engineering Conference “Machine-Building and Technosphere of the XXI Century”, Sevastopol, Ukraine, 2006, Vol. 4, pp. 55-60
1029. L.A. Dobrzański, A. Drygała: Laser processing of multicrystalline silicon for texturizaton of solar cells, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1030. W. Kwaśny, K. Gołombek, L.A. Dobrzański: Multifractal characteristic of surface topography of the wear resistant PVD coatings on sintered tool materials, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1031. L.A. Dobrzański, A. Włodarczyk-Fligier, M. Adamiak: Influence of heat treatment on properties and corrosion resistance of PM composite materials based on aluminum alloy reinforced with ceramic particles, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1032. L.A. Dobrzański, A. Śliwa, W. Sitek, W. Kwaśny: FEM application for modeling of PVD coatings properties, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1033. L.A. Dobrzański, M. Polok-Rubiniec, M. Adamiak: Structure and wear resistance of the PVD coatings deposited onto heat treated and plasma nitrited hot work tool steel, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1034. L.A. Dobrzański, R. Maniara, J.H. Sokolowski, W. Kasprzak, W. Kierkus: Influence of cooling rate on the size of the β precipitation and thermal characteristic results of Al-Si cast alloys, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1035. L.A. Dobrzański, K. Labisz, E. Jonda, A. Klimpel: Comparison of the surface alloying of the 32CrMoV12-18 tool steel using TiC and WC powder, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1036. L.A. Dobrzański, K. Labisz, M. Piec, E. Jonda, A. Polok, A. Klimpel: Surface laser alloying with TiC and WC powder of the 32CrMoV12-28 tool steel, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1037. L.A. Dobrzański, M. Krupiński, J.H. Sokolowski: Methodology of automatic quality control of Al-Si casting alloys, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1038. L.A. Dobrzański, M. Drak, B. Ziębowicz: New composite materials with specific magnetic properties, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1039. L.A. Dobrzański, Z. Brytan, M. Rosso, M. Actis Grande: Corrosion behavior of vacuum sintered Duplex Stainless Steels, Proceedings of the 9th International Conference on Advances in Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-ROM
1040. L.A. Dobrzański, R. Honysz, Z. Brytan: Distance learning in Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice, Poland, Proceedings of the 22th International Conference on CAD/CAM, Robotics and Factories of the Future, CARs & FOF 2006, Vellore, India, 2006, CD-ROM
1041. M. Krupiński, L.A. Dobrzański, J.H. Sokolowski, W. Kasprzak, G. Byczynski: Methodology for automatic control of automotive Al-Si cast components, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM
1042. L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Properties of vacuum sintered duplex stainless steels, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM
1043. A. Kloc, L.A. Dobrzański, G. Matula, J.M. Torralba: Effect of manufacturing methods on structure and properties of the gradient tool materials with the non-alloy steel matrix reinforced with the HS6-5-2 type high-speed steel, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM
1044. T. Tański, L.A. Dobrzański, L. Cížek: Influence of heat treatment on structure and properties of the cast magnesium alloys, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM
1045. L.A. Dobrzański, A. Włodarczyk-Fligier, M. Adamiak: Structure and properties of PM composite materials based on EN AW-AlCu4Mg1(A) aluminium alloy reinforced with the Ti(C,N) particles, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM
1046. L.A. Dobrzański, R. Maniara, J.H. Sokolowski, W. Kasprzak, W.T. Kierkus: Influence of cooling rate on the size of the precipitates and thermal characteristic of Al-Si cast alloys, International Conference on Processing & Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, THERMEC’2006, Vancouver, Canada, CD-ROM
1047. L.A. Dobrzański, M. Drak, J. Konieczny, B. Ziębowicz: New possibilities of application of composite materials with specific magnetic properties, Proceedings of the 14h International Conference on Composites/Nano Engineering, ICCE-14, Boulder, Colorado, USA, 2006, CD-ROM
1048. L.A. Dobrzański, E. Jonda, A. Polok: Structure and properties of the X40CrMoV5-1 and 55NiCrMoV7 hot work tool steels with the surface layers laser alloyed with the ceramic powders, Proceedings of the 16th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2006, Limerick, Ireland, 2006, CD-ROM
1049. L.A. Dobrzański, G. Matula: Comparison of structure and properties of the HS12-1-5-5 type high-speed steel fabricated using modern forming methods and heat treated, Proceedings of the 16th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2006, Limerick, Ireland, 2006, CD-ROM, pp. 1-6
1050. L.A. Dobrzański, Z. Brytan, M. Rosso, M. Actis Grande: Properties of vacuum sintered Duplex Stainless Steels, Proceedings of the 16th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2006, Limerick, Ireland, 2006, CD-ROM
1051. L.A. Dobrzański, R. Maniara, J.H. Sokolowski: Artificial neural network modelling of the influence of chemical composition and cooling rate on the liquidus and solidus temperature for hypoeutectic aluminium alloys, 15th International Conference on Metallurgy and Materials, Hradec nad Moravici, Czech Republic, 2006, CD-ROM
1052. M. Bonek, L.A. Dobrzański: Surface properties modification of hot-work tool steel by the use HPDL laser treatment, Proceedings of the 5th International Surface Engineering Congress, Seattle, Washington, USA, 2006, CD-ROM
1053. L.A. Dobrzański, A. Śliwa, W. Sitek: Finite Element Method application for modeling of PVD coatings properties, Proceedings of the 5th International Surface Engineering Congress, Seattle, Washington, USA, 2006, pp. 26-29
1054. L.A. Dobrzański, J. Mikuła, K. Gołombek, D. Pakuła, J. Kopač, M. Soković: Functional properties of PVD and CVD coated tool ceramics, 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia, 2006, CD-ROM
1055. M. Bonek, L.A. Dobrzański, E. Hajduczek: Diode laser surface treatment of hot-work tool steel, Proceedings of 7th International Tooling Conference “Tooling materials and their applications from research to market”, Tool 2006, Turin, Italy, 2006, pp. 829-836
1056. L.A. Dobrzański, A. Śliwa, W. Kwaśny, W. Sitek: Employment of the finite element method for determining stresses in coatings obtained on high speed steel with the PVD process, Proceedings of 7th International Tooling Conference “Tooling materials and their applications from research to market”, Tool 2006, Turin, Italy, 2006, pp. 573-579
1057. L.A. Dobrzański, M. Polok-Rubiniec, M. Adamiak: Improvement of hot work steels wear resistance by plasma nitriding and PVD coatings, Proceedings of 7th International Tooling Conference “Tooling materials and their applications from research to market”, Tool 2006, Turin, Italy, 2006, pp. 465-472
1058. G. Matula, L.A. Dobrzański, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Comparison of structure and mechanical properties of HS12-1-5-5 type high-speed steels produced by PIM method and heat treated, Proceedings of 7th International Tooling Conference “Tooling materials and their applications from research to market”, Tool 2006, Turin, Italy, 2006, pp. 417-422
1059. L.A. Dobrzański, K. Gołombek: Characterizations and wear properties of gradient and multilayer coatings deposited on the sintered tool materials, Proceedings of 7th International Tooling Conference “Tooling materials and their applications from research to market”, Tool 2006, Turin, Italy, 2006, pp. 199-204
1060. L.A. Dobrzański, R. Maniara, J. Sokolowski: Effect of cooling rate on the solidification behavior of ACAl7Si2Cu, 6th Scientific/Research Symposium with International Participation “Metallic and Non-metallic Inorganic Materials: production – properties – application”, Zenica, Bosnia and Herzegovina, 2006, pp. 85-90
1061. M. Bilewicz, J.C. Viana, A.M. Cunha, L.A. Dobrzański: Diversity of processing induced morphologies in polymer/polymer composites and nanocomposites and their effect on the mechanical properties, The 9th International Conference on Material Forming, ESAFORM 2006, Glasgow, United Kingdom, 2006, pp. 655-658
1062. M. Bonek, L.A. Dobrzański: Comparison of the structures of the hot-work tool steels laser modified gradient layers, Proceedings of the 2nd Pacific International Conference on Application of Lasers and Optics, PICALO’2006, Melbourne, Australia, 2006, CD-ROM
1063. L.A. Dobrzański, E. Jonda, A. Polok: Surface laser alloying with ceramic powders of the X40CrMoV5-1 tool steel, Proceedings of the 2nd Pacific International Conference on Application of Lasers and Optics, PICALO’2006, Melbourne, Australia, 2006, CD-ROM
1064. L.A. Dobrzański, E. Jonda, M. Bonek, K. Labisz, M. Piec, A. Polok: Properties and structures of gradient layer surface of 32CrMoV12-28 hot work steel alloyed using high power diode laser, 1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufacturing and Materials Processing, ICMM 2006, Kuala Lumpur, Malaysia, 2006, pp. 171-174
1065. L.A. Dobrzański, E. Jonda: The influence of laser alloying conditions on the structure and properties of hot work tool steels surface, Proceedings of the Seminar on Application of Lasers in Material Processing, Kolkata, India, 2006, pp. 173-179
1066. L.A. Dobrzański, K. Gołombek, D. Pakuła, J. Mikuła: Nanocrystalline gradient and multilayers coatings deposited onto sintered tool materials, International Conference on Superhard Coatings, Ein Gedi, Israel, 2006, pp. 24-27
1067. M. Bonek, L.A. Dobrzański, E. Hajduczek, A. Klimpel: Fundamental understanding of crystallisation mechanism of laser alloyed tool steel, Teheran International Congress on Manufacturing Engineering, TICME 2005, Teheran, Iran, 2005, CD-ROM
1068. L.A. Dobrzański, J. Trzaska, W. Sitek: The sense of artificial intelligence in designing new materials, International Advanced Technology Congress, ATCi’2005, Putrajaya, Malaysia, 2005, CD-ROM
1069. L.A. Dobrzański, M. Drak: Hard magnetic composite materials and Nd-Fe-B with additions of iron and X2CrNiMo-17-12-2 steel, International Symposium on Functional Materials, Kuala Lumpur, Malaysia, 2005, CD-ROM
1070. M. Bonek, L.A. Dobrzański, E. Hajduczek, A. Klimpel: Diode laser surface treatment of X40CrMoV5-1 hot-work tool steel, 4th International Conference on Materials Processing for Properties and Performance (MP3), Tsukuba Science City Ibaraki, Japan, 2005, pp. 247-249
1071. K. Gołombek, L.A. Dobrzański: Characterization of cutting tools made from cemented carbides coated with wear resistance surface layers, 4th International Conference on Materials Processing for Properties and Performance (MP3), Tsukuba Science City Ibaraki, Japan, 2005, pp. 81-83
1072. L.A. Dobrzański, J. Mikuła, D. Pakuła: Hard, wear resistant coatings deposited on sintered tool materials, Proceeding of 18th International Congress of Mechanical Engineering, COBEM 2005, Ouro Preto, Brazil, CD-ROM
1073. L.A. Dobrzański, M. Bonek, M. Piec, E. Hajduczek, A. Klimpel: Laser modification of hot-work tool steels gradient layers, Proceedings of the 24th International Congress on Application of Laser & Electro-Optics, ICALEO 2005, Miami, Florida, USA, 2005, CD-ROM
1074. L.A. Dobrzański, K. Labisz, M. Piec, J. Lelątko, A. Klimpel: Structure and properties of the 32CrMoV12-28 steel alloyed with WC powder using HPDL laser, 5th International Latin-American Conference on Powder Technology, PTECH2005, Costa do Sauipe – Salvador, Brazil, 2005, CD-ROM, pp. 1-6
1075. L.A. Dobrzański, A. Włodarczyk, M. Adamiak: Composite materials based on EN AW-Al Cu4Mg1(A) aluminium alloy reinforced with the Ti(C,N) ceramic particles, 5th International Latin-American Conference on Powder Technology, PTECH2005, Costa do Sauipe – Salvador, Brazil, 2005, CD-ROM, pp. 1-6
1076. L.A. Dobrzański, J. Mikuła, K. Gołombek: Structural characteristics of the modern sintered tool materials, 5th International Latin-American Conference on Powder Technology, PTECH2005, Costa do Sauipe – Salvador, Brazil, 2005, pp. 67-74
1077. L.A. Dobrzański, M. Drak, J. Trzaska, Modeling of magnetic and mechanical properties of hard magnetic composite materials Nd-Fe-B, Selected Papers from the International Conference of Computational Methods in Science and Engineering, ICCMSE’2005, Loutraki, Corinth, Greece, Lecture Series on Computer and Computational Sciences, Vol. 4, 2005, pp. 1868-1870
1078. L.A. Dobrzański, J. Trzaska, W. Sitek, The examples of the artificial intelligence applications in materials engineering, Selected Papers from the International Conference of Computational Methods in Science and Engineering, ICCMSE’2005, Loutraki, Corinth, Greece, Lecture Series on Computer and Computational Sciences, Vol. 4, 2005, pp. 1864-1867
1079. L.A. Dobrzański, M. Piec, K. Labisz, A. Lisiecki, A. Klimpel: Effect of laser surface alloying of X38CrMoV5-3 hot work tool steel, Proceedings of the 5th International Conference "THE" Coatings in Manufacturing Engineering, Kallithea – Chalkidiki, Greece, 2005, pp. 435-442
1080. L.A. Dobrzański, K. Labisz, M. Piec, A. Klimpel, A. Lisiecki: Influence of vanadium carbide ceramic powder on structure and properties of hot work tool steel alloyed with HPDL laser, Proceedings of the 2nd International Conference on Manufacturing Engineering, ICMEN, Kallithea – Chalkidiki, Greece, 2005, pp. 179-185
1081. M. Actis Grande, J. Otręba, E.J. Pallavicini, L.A. Dobrzański, M. Rosso: Effect of cooling rate on the properties of Ni Mo and Ni-Mo-W sintered steels, Proceedings of Euro PM2005, European Powder Metallurgy Congress & Exhibition, Prague, Czech Republic, 2005, pp. 249-254
1082. L.A. Dobrzański, K. Lukaszkowicz: Structure and properties of the carbides and Al2O3 oxide ceramics deposited by PVD coatings, 9th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2005, Proceedings, Antalaya, Turkey, 2005, pp. 97-100
1083. L.A. Dobrzański, D. Pakuła, K. Gołombek: Structure and properties of gradient and multi (Ti,Al,Si)N+TiN nanocrystalline coatings deposited on cermet and ceramic tool materials, 9th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2005, Antalaya, Turkey, 2005, pp. 37-40
1084. L.A. Dobrzański, M. Polok, M. Adamiak: Characterisation of the TiN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrided hot work tool steel, RIVA 5 – 5th Iberian Vacuum Meeting, XI Spanish Vacuum Meeting, V Portuguese Vacuum Meeting, Book of abstracts, Guimaraes, Portugal, 2005, pp. 166-167
1085. L.A. Dobrzański, W. Hufenbach, M. Gude, A. Czulak, M. Stach, J. Konieczny, Optimisation of the rivet joint of the CERP composite material and 6061 aluminium alloy, 12th International Science and Engineering Conference “Machine-Building and Technosphere of the XXI Century”, Sevastopol, Ukraine, 2006, Vol. 5, pp. 55-60
1086. L.A. Dobrzański, G. Matula, A. Varez, B. Levenfeld, J. Torralba: Comparison of structure and mechanical properties of HS12-1-5-5 type high-speed steels produced by Powder Injection Moulding and Pressureless Forming method, 16th International Plansee Seminar 2005, Powder Metallurgical High Performance Materials, Proceedings, Vol. 1: High performance P/M metals, Reutte, Austria, 2005, pp. 638-647
1087. L.A. Dobrzański, M. Piec, A. Klimpel: Application of high power diode laser for alloying the X38CrMoV5-3 steel surface layer with tungsten carbide, International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 243-245
1088. L.A. Dobrzański, D. Pakuła, K. Lukaszkowicz: Structure and properties of the anti-wear and corrosion resistant coatings deposited by PVD and CVD technique onto the nitride tool ceramics substrate, Proceedings Book. International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 218-220
1089. L.A. Dobrzański, M. Drak: Protective coatings deposited on hard magnetic composite materials Nd-Fe-B, Proceedings Book. International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 100-102
1090. M. Bonek, L.A. Dobrzański, E. Hajduczek, A. Klimpel: Tool steel faze transformations in HPDL laser assisted heat treatment, Proceedings Book. International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 83-85
1091. K. Gołombek, J. Mikuła, D. Pakuła, L.A. Dobrzański: Characteristics of nanocrystalline coatings deposited on the cutting tool ceramics, Proceedings Book. International Conference on Surface, Coatings and Nanostructured Materials, nanoSMat 2005, Aveiro, Portugal, 2005, pp. 80-82
1092. L.A. Dobrzański, M. Piec, K. Labisz, A. Klimpel: Surface hardening of hot work tool steel using a high power diode laser, 10th International Conference on Theoretical and Experimental Problems of Materials Engineering, Progress in Materials Engineering PiME'05, Roznov pod Radhostem, Czech Republic, 2005, pp. 37-43
1093. L.A. Dobrzański, W. Sitek: Computer simulation of the hardenability of heat-treatable steels, 1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, IFHTSE 2005, Proceedings, Pula, Croatia, 2005, pp. 425-431
1094. L.A. Dobrzański, M. Bonek, E. Hajduczek: Effect of laser HPDL surface modification of X40CrMoV5-1 hot-work tool steel, 1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, IFHTSE 2005, Proceedings, Pula, Croatia, 2005, pp. 341-347
1095. L.A. Dobrzański, M. Polok, M. Adamiak, M.G. Faga: Improvement wear resistance of hot-work tool steel by plasma nitriding and PVD coatings, 1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, IFHTSE 2005, Proceedings, Pula, Croatia, 2005, pp. 185-191
1096. L.A. Dobrzański, M. Drak, J. Trzaska: Employment of neural networks for modelling of corrosive wear of hard magnetic composite materials, 5th International Conference on Industrial Tools, ICIT’2005, Conference proceedings, Velenje, Cejle, Slovenia, 2005, pp. 315-320
1097. L.A. Dobrzański, G. Matula, G. Herranz, A. Várez, B. Levenfeld, J.M. Torallba: Influence of debinding process on microstructure and properties of HS6-5-2- HSS parts produced by powder injection moulding, 5th International Conference on Industrial Tools, ICIT’2005, Conference proceedings, Velenje, Cejle, Slovenia, 2005, pp. 189-195
1098. L.A. Dobrzański, J. Mikuła, K. Gołombek, J. Kopač, M. Soković: Effect of depositing multilayers on properties of the selected cemented carbides, cermets and tool ceramics, 5th International Conference on Industrial Tools, ICIT’2005, Conference proceedings, Velenje, Cejle, Slovenia, 2005, pp. 183-188
1099. L.A. Dobrzański, D. Pakuła, J. Kopač, M. Soković: Properties of cutting ability of the nitride tool ceramics coated by PVD and CVD coatings, 5th International Conference on Industrial Tools, ICIT’2005, Conference proceedings, Velenje, Cejle, Slovenia, pp. 159-164
1100. L.A. Dobrzański, M. Piec, K. Labisz, A. Klimpel, A. Lisiecki: Structure and properties of the surface layer obtained by laser treatment of the X38CrMoV5-3 hot work tool steel, Seventh International Conference on Applied Mechanics, Book of extended abstracts, Hrotovice, Czech Republic, 2005, pp. 81-83
1101. L.A. Dobrzański, K. Labisz, A. Klimpel, A. Lisiecki: Structure and properties of the surface layer obtained by laser treatment of the hot work tool steel, Seventh International Conference on Applied Mechanics, Book of extended abstracts, Hrotovice, Czech Republic, 2005, pp. 63-64
1102. M. Bonek, L.A. Dobrzański, E. Hajduczek, A. Klimpel: Characteristics of the Laser Alloyed Hot-Work Tool Steels, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. II, Singapore, 2005, pp. 1030-1038
1103. L.A. Dobrzański, J. Mikuła: Structure and Properties of PVD and CVD Coated Oxide Ceramic Tool Materials based on Al2O3, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. II, Singapore, 2005, pp. 1007-1016
1104. D. Pakuła, L.A. Dobrzański, S. Skrzypek, K. Gołombek: Tribological and Mechanical Properties of the Hard Wear Resistant Coatings Deposited onto the Nitride Tool Ceramics, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. II, Singapore, 2005, pp. 999-1006
1105. L.A. Dobrzański, K. Lukaszkowicz, E. Hajduczek: Adhesion of Monolayers Coatings Deposited by Magnetron Sputtering Process onto the Brass Substrate, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. II, Singapore, 2005, pp. 972-983
1106. L.A. Dobrzański, K. Gołombek, D. Pakuła: Structure and Properties of the PVD Coatings Deposited onto the Cermets, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. II, Singapore, 2005, pp. 955-963
1107. G. Matula, L.A. Dobrzański, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba: Influence of Atmosphere and Temperature of Debinding on Microstructure of HS6-5-2 HSS Parts Produced by Powder Injection Moulding, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. II, Singapore, 2005, pp. 752-761
1108. L.A. Dobrzański, J. Trzaska: Continuous Cooling Transformations Diagrams of Engineering Steels Predicted by the Use of Artificial Intelligence Methodology, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. II, Singapore, 2005, pp. 711-719
1109. L.A. Dobrzański, R. Nowosielski, J. Konieczny, M. Drak: Influence of Temperature Annealing on Structure and Magnetic Properties of Cobalt-Matrix Powders Alloys Obtained in High-Energy Ball Milling, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. I, Singapore, 2005, pp. 413-419
1110. L.A. Dobrzański, M. Drak: Hard Magnetic Composite Materials Nd-Fe-B, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. I, Singapore, 2005, pp. 403-412
1111. B. Ziębowicz, D. Szewieczek, L.A. Dobrzański, A. Przybył, G. Matula: Magnetic Properties and Structure of the Finemet Alloy Powders Bound with Polymer, Processing and Fabrication of Advanced Materials XIII, Proceedings of a conference, Vol. I, Singapore, 2005, pp. 394-403
1112. L.A. Dobrzański, D. Pakuła: Structure and properties of the Si3N4 nitride ceramics with PVD and CVD coatings, Proceedings of the 3rd International Conference on Advanced Materials Processing (ICAMP-3) and the Australasian Ceramic Society Biannual International Conference (Austceram 2004), Melbourne, Australia, 2004, CD-ROM, pp. 234-239
1113. L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel: Development of surface layers alloyed by HPDL laser on hot-work tool steel, Proceedings of the 3rd International Conference on Advanced Materials Processing, ICAMP-3, Melbourne, Australia, 2004, pp. 184-189
1114. L.A. Dobrzański, M. Drak: Structure and properties of polymer matrix hard magnetic composite materials Nd-Fe-B, 3rd International Conference on Materials Processing for Properties and Performance (MP3 - III), Vol. 3, Singapore, 2004, pp. 896-904
1115. L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel: The Investigation of Microstructures and Properties of X40CrMoV5-1 Hot Work Tool Steel after Laser Alloying, 3rd International Conference on Materials Processing for Properties and Performance (MP3 - III), Vol. 3, Singapore, 2004, pp. 886-895
1116. G. Matula, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba, L.A. Dobrzański: Microstructure and mechanical properties of T15 high-speed steels parts produced by powder injection moulding using a polyethylene based binder, Proceedings of EURO PM2004, European Powder Metallurgy, World Congress & Exhibition, Vienna, Austria, 2004, Vol. 3, pp. 469-475
1117. M. Actis Grande, D. Ugues, L.A. Dobrzański, Z. Brytan, M. Rosso: Properties of vacuum sintered Duplex Stainless Steels, Proceedings of EURO PM2004, European Powder Metallurgy, World Congress & Exhibition, Vienna, Austria, 2004, Vol. 3, pp. 395-400
1118. L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel: Laser alloyed hot-work tool steels with WC carbides, 23rd International Congress on Application of Lasers and Electro-Optics, ICALEO 2004, Laser Materials Processing Conference, San Francisco, California, USA, 2004, pp. 2001-2010
1119. L.A. Dobrzański, J. Trzaska: Modelling relationship between the steel chemical composition and the temperature of the pearlitic transformation start, Proceedings of the Scientific Conference with International Participation “Manufacturing and Management in the 21st Century”, Ohrid, Macedonia, 2004, CD-ROM
1120. L.A. Dobrzański, M. Drak: Structure and application properties of polymer matrix hard magnetic composite materials reinforced with Nd-Fe-B nanocrystalline particles with metal addition, Proceedings of the Scientific Conference with International Participation “Manufacturing and Management in the 21st Century”, Ohrid, Macedonia, 2004, CD-ROM
1121. L.A. Dobrzański, Z. Brytan, M. Rosso, M. Actis Grande: Structure and mechanical properties of sintered duplex steels, Proceedings of the Scientific Conference with International Participation “Manufacturing and Management in the 21st Century”, Ohrid, Macedonia, 2004, CD-ROM
1122. L.A. Dobrzański, J. Trzaska, K. Gołombek: Application of neural networks for prediction of the martensitic transformation start temperature, Proceedings of 11th International Science and Engineering Conference “Machine-Building and Technosphere of the 21st Century”, Doneck, Sevastopol, Ukraina, 2004, Vol. 4, pp. 68-71
1123. L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel: Tribological behaviour of the X40CrMoV5-1 steel alloyed with tungsten carbide using the high power diode laser, Proceedings of 11th International Science and Engineering Conference “Machine-Building and Technosphere of the 21st Century”, Doneck, Sevastopol, Ukraina, 2004, Vol. 4, pp. 63-68
1124. L.A. Dobrzański, R. Nowosielski, J. Konieczny: Softmagnetic nanocomposite with silicon polymer matrix and powdered Co77Si11.5B11.5, Proceedings of 12th International Conference on Experimental Mechanics, ICEM12, Bari, Italy, 2004, CD-ROM
1125. L.A. Dobrzański, D. Pakuła: Nitride Tool Ceramics Coated with the Thin Wear Resistant Coatings, Eleventh International Conference on Composites/Nano Engineering, ICCE-11, South Carolina, USA, 2004, pp. 139-140
1126. L.A. Dobrzański, J. Mikuła: Tribological Properties of the Al2O3+TiC Based Tool Ceramic Reinforced with PVD Wear Resistant Coatings, Eleventh International Conference on Composites/Nano Engineering, ICCE-11, South Carolina, USA, 2004, pp. 137-138
1127. L.A. Dobrzański, K. Gołombek: Effect of the hard surface coatings on properties of the sintered tool materials, Proceedings of Workshop WS-15 on Surface Engineering for Hard Coatings, Recent Advances in Thin Films and Hard Coatings, Ávila, Spain, 2004, CD-ROM
1128. L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel: Tribological behaviour of the X40CrMoV5-1 steel alloyed with tungsten carbide using the high power diode laser, International Science Journal “Progressive Technology and Systems in Machine-Building”, Donieck, Ukraine, 2004, pp. 245-249
1129. L.A. Dobrzański: Significance of materials science for the future development of societies, Proceedings of the 8th Cairo University International Conference on Mechanical Design and Production, MDP-8, Cairo, Egypt, 2004
1130. L.A. Dobrzański, J. Trzaska: Effects of alloying elements concentration and cooling rate on continuous cooling transformations predicted by neural network, Proceedings of the 17th International Congress of Mechanical Engineering, COBEM 2003, São Paulo, Brazil, 2003, pp. 56-64
1131. L.A. Dobrzański, R. Nowosielski, J. Konieczny: Structure and properties of nanocrystalline soft magnetic composite materials with polymer matrix, Proceedings of the 17th International Congress of Mechanical Engineering, COBEM 2003, São Paulo, Brazil, 2003
1132. L.A. Dobrzański: Materials design as an important element of advanced products’ engineering design and manufacturing, Proceedings of the 17th International Congress of Mechanical Engineering, COBEM 2003, São Paulo, Brazil, 2003
1133. M. Adamiak, J.B. Fogagnolo, E.M. Ruiz–Navas, L.A. Dobrzański, J.M. Torralba: Mechanically Milled AA6061/(Ti3Al)p MMC Reinforced with Intermetallics, European Powder Metallurgy Conference on Meeting the Challenges of a Changing Market Place, Euro PM2003, Conference proceedings, Vol. 2, Valencia, Spain, 2003, pp. 291-295
1134. W. Kwaśny, L.A. Dobrzański, M. Pawlyta, J. Żak: Fractal character of surface topography of Ti+Ti(C,N) coatings obtained using magnetron sputtering, Proceedings of the 6th International Conference on Modern Technologies in Manufacturing, MTeM’2003, Cluj-Napoca, Romania, pp. 279-282
1135. L.A. Dobrzański, K. Lukaszkowicz: Tribology of PVD thin coatings, Proceedings of the 6th International Conference on Modern Technologies in Manufacturing, MTeM’2003, Cluj-Napoca, Romania, 2003, pp. 163-166
1136. L.A. Dobrzański, W. Sitek: Effect of the chemical composition on secondary hardness of the high speed steels, Proceedings of the 1st International Conference on Computer Aided Design and Manufacturing, CADAM 2003, Šibenik, Croatia, 2003
1137. L.A. Dobrzański, K. Lukaszkowicz: Corrosion resistance of the PVD coatings deposited on the brass substrate, 7th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2003, Proceedings, Lloret de Mar, Barcelona, Spain, 2003, pp. 217-220
1138. L.A. Dobrzański, D. Pakuła, M. Pancielejko: Investigation of properties of the Si3N4 nitride tool ceramics covered with hard surface layers in the process of CVD and PVD, 7th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2003, Proceedings, Lloret de Mar, Barcelona, Spain, 2003, pp. 213-216
1139. L.A. Dobrzański, G. Matula, B. Levenfeld, A. Várez, J.M. Torralba: Influence of heat-treatment on structure and properties of the HS6-5-2 and HS12-1-5-5 high-speed steels produced by PIM process, 7th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2003, Proceedings, Lloret de Mar, Barcelona, Spain, 2003, pp. 185-188
1140. W. Sitek, L.A. Dobrzański: Genetic methods in materials' design, 7th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2003, Proceedings, Lloret de Mar, Barcelona, Spain, 2003, pp. 181-184
1141. L.A. Dobrzański, R. Nowosielski, J. Konieczny: The structure and properties of nanocrystalline powders obtained by high-energy ball milling process, Proceedings of the Tenth Annual International Conference on Composites/Nano Engineering, ICCE-10, New Orleans, USA, 2003
1142. L.A. Dobrzański, G. Matula, A. Várez, B. Levenfeld, J.M. Torralba: Structures and chemical compositions of primary carbides in HS6-5-2 and HS12-1-5-5 high-speed steels manufactured with PIM method, Proceedings of the Tenth Annual International Conference on Composites/Nano Engineering, ICCE-10, New Orleans, USA, 2003, pp. 147-148
1143. L.A. Dobrzański, K. Gołombek: Structure and properties of the hard surface coatings depositing on cemented carbides and cermets, Proceedings of the Tenth Annual International Conference on Composites/Nano Engineering, ICCE-10, New Orleans, USA, 2003
1144. M. Adamiak, J.B. Fogagnolo, E.M. Ruiz-Navas, L.A. Dobrzański, J.M. Torralba: Mechanically milled AA6061/(Ti3Al)p MMC reinforced with intermetallics – the structure and properties, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Vol. 2, Dublin, Ireland, 2003, pp. 1448-1451
1145. L.A. Dobrzański, J. Trzaska: Application of neural networks for prediction of critical values of temperatures and time of the supercooled austenite transformations, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Dublin, Ireland, 2003, pp. 607-610
1146. L.A. Dobrzański, R. Nowosielski, J. Konieczny: The structure and magnetic properties of magnetically soft cobalt base nanocrystalline powders and nanocomposites with silicon binding, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Vol. 1, Dublin, Ireland, 2003, pp. 307-310
1147. L.A. Dobrzański, M. Polok, P. Panjan, S. Bugliosi, M. Adamiak: Improvement of hot work steels wear resistance by PVD coatings deposition, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Dublin, Ireland, 2003, Vol. 1, pp. 81-84
1148. L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki: Application of high power diode laser (HPDL) for alloying of X40CrMoV5-1 steel surface layer by tungsten carbides, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’2003, Vol. 1, Dublin, Ireland, 2003, pp. 77-80
1149. L.A. Dobrzański, M. Bonek, A. Klimpel, A. Lisiecki: Effect of Laser HPDL Surface Alloying of X40CrMoV5-1 Hot-Work Tool Steel, Proceedings of the 4th International Conference on Industrial Tools, ICIT 2003, Bled – Celje, Slovenia, 2003, pp. 269-273
1150. L.A. Dobrzański, M. Bonek, A. Klimpel, A. Lisiecki: Surface layer’s structure of X40CrMoV5-1 steel remelted and/or WC alloyed with HPDL laser, The Second International Conference on Advanced Materials Processing, Singapore, 2002, pp. 156-159
1151. L.A. Dobrzański, K. Gołombek, J. Kopač, M. Soković: Structure and properties of the sintered tool materials coated with hard surface layers, Proceedings of the 6th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2002, Neum, Bosnia and Hercegovina, 2002, pp. 319-322
1152. L.A. Dobrzański, W. Kwaśny, Z. Brytan, M. Pancielejko: Effect of the substrate potential on the Ti+Ti(C,N) coatings’ properties obtained in the PVD process on the sintered high speed steel, Proceedings of the 6th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2002, Neum, Bosnia and Hercegovina, 2002, pp. 167-171
1153. M. Soković, J. Kopač, S. Panjan, L.A. Dobrzański, M. Adamiak: Wear behavior on PVD coated end mills in high-speed machining, Proceedings of the 6th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, TMT 2002, Neum, Bosnia and Hercegovina, 2002, pp. 51-58
1154. L.A. Dobrzański, W. Kwaśny: PVD coatings on the ASP30 sintered high speed steel, Proceedings of the 11th International Metallurgical and Material Conference, Metal 2002, Hradec nad Moravici, Czech Republic, 2002, pp. 1-6 CD-ROM
1155. L.A. Dobrzański, K. Lukaszkowicz, J. Madejski, M. Andritschky: Structure, corrosion resistance and mechanical properties of the PVD coatings deposited on the brass substrate, Proceedings of the 16th Brazilian Congress of Mechanical Engineering, COBEM 2001, Uberlândia, Brazil, 2001, CD-ROM
1156. L.A. Dobrzański: The role of materials design in engineering design process of product and their elements, Proceedings of the 16th Brazilian Congress of Mechanical Engineering, COBEM 2001, Uberlândia, Brazil, 2001, CD-ROM
1157. R. Shiskov, L.A. Dobrzański, W. Kwaśny, G. Kirilova, I. Dermendjiev: Obtaining of (TiMe)/(TiMe)CxN1-x coating in the vacuum furnace by magnetron sputtering on a titanium alloy, Proceedings of the 6th International Conference on Advanced Mechanical Engineering & Technology, AMTECH 2001, Sozopol, Bulgaria, 2001, pp. 31-36
1158. L.A. Dobrzański, K. Lukaszkowicz, A. Křiž: Properties of the multilayer Ti/CrN and Ti/TiAlN coatings deposited with the PVD technique onto the brass substrate, Proceedings of International Conference on Advanced Materials and Processing Technologies, AMPT’01, Leganés – Madrid, Spain, 2001, pp. 2003-2010
1159. G. Matula, L.A. Dobrzański, A. Várez, B. Levenfeld, J.M. Torralba: Sintering under different atmosphere of T15 and M2 HSS produced by a modified MIM process, Proceedings of International Conference on Advanced Materials and Processing Technologies, AMPT’01, Leganés – Madrid, Spain, 2001, pp. 758-761
1160. L.A. Dobrzański, J. Trzaska, W. Sitek: Application of neutral networks for prediction of structural steels properties, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2001, Dubrovnik – Cavtat, Croatia, 2001, pp. 393-398
1161. L.A. Dobrzański, W. Sitek, J. Zacłona: The modelling of high speed steels properties using neutral networks, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2001, Dubrovnik – Cavtat, Croatia, 2001, pp. 367-372
1162. L.A. Dobrzański: Heat treatment as fundamental technological process of formation of structure and properties of metals, Proceedings of 8th Seminar of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2001, Dubrovnik – Cavtat, Croatia, 2001, pp. 1-13
1163. L.A. Dobrzański: Materials’ Design as an important element of engineering design of machine and their parts, Proceedings of the 12th International Conference on Design Tools and Methods in Industrial Engineering, ADM’2001, Rimini, Italy, 2001, CD-ROM
1164. L.A. Dobrzański, W. Kwaśny: Structure, Erosion Resistance, and Mechanical Properties of the PVD Coatings on PM HSS Steels of the ASP30 Type, Proceedings of the 8th Annual International Conference on Composites Engineering ICCE/8, Tenerife, Spain, 2001, pp. 195-196
1165. L.A. Dobrzański, K. Gołombek: Effect of Depositing Hard Surface Coatings on Properties of the Selected Cemented Carbides and Tool Cermets, Proceedings of the 8th Annual International Conference on Composites Engineering ICCE/8, Tenerife, Spain, 2001, pp. 87-95
1166. L.A. Dobrzański, W. Kasprzak, M. Adamiak, M. Soković, J. Kopač, G.E. D’Errico: The influence of chemical composition of high-speed steels on the wear during cutting and erosion test, Proceedings of the 15th Brasilian Congress of Mechanical Engineering, COBEM’99, Sao Paulo, Brazil, 1999, CD-ROM
1167. L.A. Dobrzański, W. Kasprzak, M. Adamiak: The structure and properties of the selected heat-treated and PVD coated W-Mo-V-Co high-speed steels, Proceedings of the 2nd International Conference on Industrial Tools, ICIT’99, Maribor, Slovenia, 1999, pp. 1-6
1168. L.A. Dobrzański, W. Sitek, J. Madejski: Some aspects of materials selection in machine design, Proceedings of the International Scientific Conference on Mechanical Design, MID’98, Nottingham, Great Britain, 1998, pp. 10-17
1169. L.A. Dobrzański, W. Sitek: Application of CAHM method for evaluation of the alloying elements effects on steels’ hardenability, Proceedings of the International Scientific Conference on Advanced Materials and Processing Technologies, AMPT’98, Vol. 2, Kuala Lumpur, Malaysia, 1998, pp. 1125-1131
1170. L.A. Dobrzański, W. Kasprzak, M. Adamiak, M. Soković, G.E. D’Errico, S. Bugliosi: Cobalt effect structure, cutting ability, and erosion resistance of W-Mo-V high-speed steels, Proceedings of the 4th International Conference on Advanced Materials and Processing Technologies, AMPT’98, Vol. 2, Malaysia, 1998, pp. 772-779
1171. L.A. Dobrzański, W. Sitek: Application of neutral networks in modelling of relationships between chemical composition and hardenability of constructional alloyed steels, Proceedings of the International Scientific Conference on Artificial Intelligence in Engineering, AIENG’98, Galway, Ireland, 1998, pp. 73-76
1172. L.A. Dobrzański, M. Adamiak: Improvement of the erosion resistance of tools made from sintered high-speed steels by PVD coatings’ deposition, Proceedings of Powder Metallurgy World Congress, Granada, Spain, 1998, CD-ROM
1173. L.A. Dobrzański, M. Adamiak: PVD coatings on the 11-2-2-5+Si type high-speed steel, Proceedings of the Second International Scientific Conference on Engineering and Functional Materials, EFM’97, State University “Lviv Polytechnic”, Lviv, Ukraine, 1997, pp. 209-210
1174. L.A. Dobrzański, A. Zarychta: Niobium as partial substitute for vanadium in the W Mo V high-speed steels, Proceedings of the Second International Scientific Conference Engineering and Functional Materials, EFM’97, State University “Lviv Polytechnic”, Lviv, Ukraine, 1997, pp. 136-138
1175. L.A. Dobrzański, W. Sitek: New method of hardenability modelling of the constructional steels, Proceedings of the Second International Scientific Conference on Engineering and Functional Materials, EFM’97, State University “Lviv Polytechnic”, Lviv, Ukraine, 1997, pp. 135-136
1176. L.A. Dobrzański, M. Ligarski, M. Łach: The phase transformations during heat treatment of the high-speed steels with titanium addition, Proceedings of the International Conference Technology ‘97, Vol. I, Bratislava, Slovak Republic, 1997, pp. 32-35
1177. L.A. Dobrzański, M. Adamiak, S. Panjan: TiN and Ti(C,N) coatings on the high-speed steels with additions of Si and Ti or Nb, Conference Proceedings of the International Conference on Industrial Tools, ICIT’97, Vol. I, TECOS, Celje, Slovenia, 1997, pp. 263-268
1178. L.A. Dobrzański, M. Adamiak, G.E. D’Errico: Relationship between erosion resistance and the phase and chemical composition of the PVD coatings deposited on high-speed steels, Proceedings of the International Conference on Advanced Materials and Processing Technologies AMPT’97, Vol. I, Guimarães, Portugal, 1997, pp. 306-312
1179. L.A. Dobrzański: Structure and properties of high-speed steels with wear resistant cases or coatings, Proceedings of the International Conference on Advanced Materials and Processing Technologies AMPT’97, Vol. I, Guimaraes, Portugal, 1997, pp. 298-305
1180. L.A. Dobrzański, W. Sitek: Application of neural network in modelling of hardenability of constructional steels, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’97, Vol. I, Guimaraes, Portugal, 1997, pp. 24-31
1181. L.A. Dobrzański, W. Sitek: Computer aided materials selection system as the engineering tool for machine part design, Proceedings of the 10th International Conference on Design Tools and Methods in Industrial Engineering, ADM’97, Florence, Italy, 1997, pp. 279-288
1182. L.A. Dobrzański: Material selection principles for machine design, Proceedings of the International Seminar on Principles and Methods of Engineering Design, Vol. I, Naples, Italy, 1997, pp. 267-293
1183. L.A. Dobrzański, A. Zarychta, M. Ligarski, M. Adamiak, E. Hajduczek: The effect of heat treatment on the structure and properties of high-speed steels W-Mo-V 9 2 2 type with increased Si and Ti or Nb contents, 49º Congresso Internacional de Tecnologia Metalúrgica e de Materiais, Vol. 8, São Paulo, Brazil, 1995, pp. 445-458
1184. L.A. Dobrzański: The expert systems for computer aided materials selection, 49º Congresso Internacional de Tec-nologia Metalúrgica e de Materiais, São Paulo, Brazil, 1995, Vol. 2, pp. 91-103
1185. L.A. Dobrzański, J. Dobrzański, J. Madejski, J. Zacłona: The evaluation of the extent of damage as the base for forecasting of the residual life of pressure loaded power installation elements, Proceedings of the ILSSCRSS-I Conference University of Miskolc, Hungary, 1995, pp. 175-186
1186. L.A. Dobrzański, A. Zarychta: The effect of Nb or Ti contents on the structure and properties of W-Mo-V+Si 9-2-2 type high-speed steels, Proceedings of the 4th European Conference on Advanced Materials and Processes, Euromat’95, Symposium D–Structural Metallic Materials, Vol. 2, Padua – Venice, Italy, 1995, pp. 285-290
1187. R.H. Kozłowski, S.T. Zagierski, L.A. Dobrzański: Al-Ti intermetallic composites, Proceedings of the 4th European Conference on Advanced Materials and Processes Euromat’95, Symposium A – Ceramics and Glasses, Vol. 1, Padua – Venice, Italy, 1995, pp. 93-99
1188. L.A. Dobrzański, M. Ligarski: The possibility of partial substitution of vanadium by titanium in W-Mo-V 9-2-2+Si type high speed steels, 3. Vedecka Konferencia s medzinárodnou účast’ou CO MAT TECH ‘95, Trnava, Slovak Republic, 1995, pp. 36-39
1189. L.A. Dobrzański, A. Zarychta, M. Adamiak, W. Kasprzak, L. Kubica: Incipient melting processes in W-Mo-V 11-2-2 type high-speed steels with increased Nb contents, 3. Vedecka Konferencia s medzinárodnou účast’ou CO MAT TECH '95, Trnava, Slovak Republic, 1995, pp. 32-35
1190. L.A. Dobrzański, A. Zarychta: The structure and properties of W-Mo-V high-speed steels with increased contents of Si and Nb after heat treatment, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’95, Vol. I, Dublin, Ireland, 1995, pp. 123-137
1191. L.A. Dobrzański, A. Zarychta, M. Ligarski, W. Kasprzak: The heat treatment of W-Mo-V+Si high-speed steels with increased Ti contents, 2. Konferencia s medzinárodnou účast’ou COMAT TECH'94, Trnava, Slovak Republic, 1994, t. 1, pp. 109-112
1192. L.A. Dobrzański, W. Sitek, J.G. Szota, T. Kotania: Computer aided thermo-chemical treatment selection of machine elements, 2. Konferencia s medzinárodnou účast’ou CO MAT TECH'94, Trnava, Slovak Republic, 1994, t. 1, pp. 105-108
1193. L.A. Dobrzański: The structure and properties of high-speed steels after heat, thermomechanical, thermo-chemical or surface treatments, Proceedings of the 2nd Australian International Conference on Surface Engineering, Coatings and Surface Treatments in Manufacturing, vol. 1, University of South Australia, Adelaide, Australia, 1994, pp. K55-K70
1194. L.A. Dobrzański: Heat treatment of high-speed steels and the accompanying phase transformations, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’93, vol. III, Dublin, Ireland, 1993, pp. 1867-1886
1195. L.A. Dobrzański: The structure and properties of the W-V high-speed steels with the increased content of silicon, Proceedings of the International Conference on Advanced Materials and Processing Technologies, AMPT’93, vol. III, Dublin, Ireland, 1993, pp. 1849-1866
1196. L.A. Dobrzański, J. Dobrzański, J. Madejski, J. Zacłona: The conception of a computer aided decision making system connected with the residual life of the elements of power installations in the conditions of creep, Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT’93), Dublin, Ireland, 1993, Vol. III, pp. 1805-1815
1197. L.A. Dobrzański, J. Madejski, W. Malina, W. Sitek: The prototype of an expert system for the selection of high-speed steels for cutting tools, Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT’93), Dublin, Ireland, 1993, Vol. III, pp. 1641 1649
1198. L.A. Dobrzański, J. Madejski: Ecological aspects of the HSS tools manufacturing process, Proceedings of the 4th International Seminar of IFHT & SE Environmental and Energy Efficient Heat Treatment Technologies, International Academic Publishers, Beijing, China, 1993, pp. 92-101
1199. E. Hajduczek, L.A. Dobrzański, J. Adamczyk: The effect of heat treatment on structure and properties of a Cr-Mo-W-V tool steel, Proceedings of the 5th International Congress on Heat Treatment of Materials, Vol. II, Budapest, Hungary, 1986, pp. 975-981
1200. L.A. Dobrzański: Time-temperature-incipient melting diagrams for W-V high-silicon high-speed steel without molybdenum, Proceedings of the 5th International Congress on Heat Treatment of Materials, Vol. II, Budapest, Hungary, 1986, pp. 959 966
1201. L.A. Dobrzański: The effect of silicon on the morphology and phase constitution of carbides in as-cast 9 0 2 high-speed steel, Proceedings of the 6th Symposium on Metallography, Part 2, Vysoke Tatry, CSRS, 1986, pp. 128 132
1202. J. Adamczyk, L.A. Dobrzański, E. Hajduczek: The effect of hot deformation of 12 0 2+C high speed steel in austenitized condition on the morphology of phases after quenching, Proceedings of the Eight European Congress on Electron Microscopy, Vol. 1, Budapest, Hungary, 1984, pp. 783-784
1203. J. Adamczyk, L.A. Dobrzański: Phase transformations during high-temperature thermomechanical treatment of the W Mo V high-speed steel of 12 0 2+C grade, Proceedings of the 11th Conference on Electron Microscopy and Microanalysis, Budapest – Szeged, Hungary, 1979, pp. 152 154