Zestawienie artykułów w języku angielskim w pozostałych czasopismach umieszczonych w bazie abstraktów i cytowań Scopus lub w grupie B w „Wykazie wybranych czasopism …” MNiSW

268.    L.A. Dobrzański: Applications of newly developed nanostructural and microporous materials in biomedical, tissue and mechanical engineering, Archives of Materials Science and Engineering, Vol. 76, 2015, Issue 2, pp. 53-114
269.    L.A. Dobrzański, A. Hudecki, G. Chladek, W. Król, A. Mertas: Biodegradable and antimicrobial polycaprolactone nanofibers with and without silver precipitates, Archives of Materials Science and Engineering, Vol. 76, 2015, Issue 1, pp. 5-26
270.    M. Kremzer, L.A. Dobrzański, M. Dziekońska, M. Macek: Atomic layer deposition of TiO2 onto porous biomaterials, Archives of Materials Science and Engineering, Vol. 75, 2015, Issue 2, pp. 63-69
271.    L.A. Dobrzański, I. Czaja: Effect of nanowires and nanoparticles of copper on the structure and properties of the nanocomposite polymeric materials, Archives of Materials Science and Engineering, Vol. 75, 2015, Issue 1, pp. 18-29
272.    L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, M. Szindler, A. Achtelik-Franczak, W. Pakieła: Atomic layer deposition of TiO2 onto porous biomaterials, Archives of Materials Science and Engineering, Vol. 75, 2015, Issue 1, pp. 5-11
273.    L.A. Dobrzański, M. Macek, B. Tomiczek, W. Pakieła, M. Kremzer: Influence of the milling time and MWCNT content on the wear properties of the AlMg1SiCu/MWCNT nanocomposites, Archives of Materials Science and Engineering, Vol. 74, 2015, Issue 2, pp. 77-84
274.    L.A. Dobrzański, A. Wierzbicka, A. Drygała, K. Lukaszkowicz: Influence of carbon nanotubes on properties of dye-sensitised solar cells, Archives of Materials Science and Engineering, Vol. 74, 2015, Issue 1, pp. 32-44
275.    L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, A. Achtelik-Franczak, L.B. Dobrzański: Comparative analysis of mechanical properties of scaffolds sintered from Ti and Ti6Al4V powders, Archives of Materials Science and Engineering, Vol. 73, 2015, Issue 2, pp. 69-81
276.    L.A. Dobrzański, M. Szindler, M.M. Szindler: Surface morphology and optical properties of Al2O3 thin films deposited by ALD method, Archives of Materials Science and Engineering, Vol. 73, 2015, Issue 1, pp. 18-24
277.    L.A. Dobrzański, A. Mucha, M. Prokopiuk vel Prokopowicz, A. Drygała, K. Lukaszkowicz: Technology of dye-sensitized solar cells with carbon nanotubes, Archives of Materials Science and Engineering, Vol. 70, 2014, Issue 2, pp. 70-76
278.    L.A. Dobrzański, A. Hudecki, G. Chladek, W. Król, A. Mertas: Surface properties and antimicrobial activity of composite nanofibers of polycaprolactone with silver precipitations, Archives of Materials Science and Engineering, Vol. 70, 2014, Issue 2, pp. 53-60
279.    L.A. Dobrzański, A. Hudecki: Structure, geometrical characteristics and properties of biodegradable micro- and polycaprolactone nanofibers, Archives of Materials Science and Engineering, Vol. 70, 2014, Issue 1, pp. 5-13
280.    L.A. Dobrzański: Overview and general ideas of the development of constructions, materials, technologies and clinical applications of scaffolds engineering for regenerative medicine, Archives of Materials Science and Engineering, Vol. 69, 2014, Issue 2, pp. 53-80
281.    L.A. Dobrzański, B. Nieradka, M. Macek, W. Matysiak: Influence of the electrospinning parameters on the morphology of composite nanofibers, Archives of Materials Science and Engineering, Vol. 69, 2014, Issue 1, pp. 32-37
282.    L.A. Dobrzański, M. Macek, B. Tomiczek: Effect of carbon nanotubes content on morphology and properties of AlMg1SiCu matrix composite powders, Archives of Materials Science and Engineering, Vol. 69, 2014, Issue 1, pp. 12-18
283.    L.A. Dobrzański, A. Mucha, M. Macek: The influence of carbon nanotubes on the mechanical properties of nanocomposites, Archives of Materials Science and Engineering, Vol. 68, 2014, Issue 2, pp. 75-80
284.    M. Kremzer, L.A. Dobrzański, M. Dziekońska, A. Radziszewska: Structure and properties of aluminium-silicon matrix composites manufactured by pressure infiltration method, Archives of Materials Science and Engineering, Vol. 68, 2014, Issue 2, pp. 53-58
285.    M. Król, M. Kujawa, L.A. Dobrzański, T. Tański: Influence of technological parameters on additive manufacturing steel parts in Selective Laser Sintering, Archives of Materials Science and Engineering, Vol. 67, 2014, Issue 2, pp. 84-92
286.    L.A. Dobrzański, M. Gawron, M. Berliński: The use of artificial neural networks for the prediction of a chemical composition of hot metal produced in blast furnace, Archives of Materials Science and Engineering, Vol. 67, 2014, Issue 1, pp. 32-38
287.    L.A. Dobrzański, M. Szindler, M.M. Szindler, B. Hajduk: Sol-gel Al2O3 antireflection coatings for silicon solar cells, Archives of Materials Science and Engineering, Vol. 67, 2014, Issue 1, pp. 24-31
288.    T. Tański, L.A. Dobrzański, S. Rusz, W. Matysiak, M. Kraus: Characteristic features of fine-grained coatings deposited on magnesium alloys, Archives of Materials Science and Engineering, Vol. 66, 2014, Issue 1, pp. 13-20
289.    A.E. Tomiczek, L.A. Dobrzański: Characterization of composite materials with giant magnetostriction, Archives of Materials Science and Engineering, Vol. 65, 2014, Issue 1, pp. 5-23
290.    A.J. Nowak, L.A. Dobrzański, R. Rybczyński, R. Mech: Finite Element Method application for modelling of internal oesophageal prosthesis, Archives of Materials Science and Engineering, Vol. 64, 2013, Issue 2, pp. 198-204
291.    T. Stefański, P. Malara, A. Kloc-Ptaszna, B. Janoszka, L. Postek-Stefańska, K. Tyrpień-Golder, L.A. Dobrzański: Erosive potential of calcium-supplemented citric acid on bovine enamel, Archives of Materials Science and Engineering, Vol. 64, 2013, Issue 2, pp. 175-181
292.    L.A. Dobrzański, M. Kujawa: Properties of stainless steel based on ferritic steel X6Cr13 made by powder metallurgy, Archives of Materials Science and Engineering, Vol. 64, 2013, Issue 2, pp. 135-143
293.    M. Musztyfaga, L.A. Dobrzański, S. Rusz, L. Prokop, S. Misak: Application of modern technique to set the parameters of the monocrystalline solar cell and its structure, Przegląd Elektrotechniczny, Vol. 89, 2013, Issue 11, pp. 24-26
294.    G.F. Batalha, M.T. Roszak, I.B. da Silva, O.L. Agostinho, L.A. Dobrzański: Towards a design for ecological management and product sustainability - European and Brazilian approaches, Archives of Materials Science and Engineering, Vol. 64, 2013, Issue 1, pp. 34-39
295.    J. Żmudzki, G. Chladek, P. Malara, L.A. Dobrzański, M. Zorychta, K. Basa: The simulation of mastication efficiency of the mucous-borne complete dentures, Archives of Materials Science and Engineering, Vol. 63, 2013, Issue 2, pp. 75-86
296.    A. Śliwa, W. Kwaśny, L.A. Dobrzański, R. Dziwis: Properties determination of two-layer coatings deposited by PVD techniques using computer simulation, Archives of Materials Science and Engineering, Vol. 63, 2013, Issue 2, pp. 68-74
297.    K. Labisz, T. Tański, L.A. Dobrzański, D. Janicki, K. Korcina: HPDL laser alloying of Al-Si-Cu alloy with Al2O3 powder, Archives of Materials Science and Engineering, Vol. 63, 2013, Issue 1, pp. 36-45
298.    L.A. Dobrzański, A. Drygała, M. Prokopiuk vel Prokopowicz: Selection of components for photovoltaic system, Archives of Materials Science and Engineering, Vol. 62, 2013, Issue 2, pp. 53-59
299.    P. Malara, A. Kloc-Ptaszna, L.A. Dobrzański, M. Górniak, T. Stefański: Water dilution and alcohol mixing on erosive potential of orange juice on bovine enamel, Archives of Materials Science and Engineering, Vol. 62, 2013, Issue 1, pp. 15-21
300.    G. Chladek, J. Żmudzki, P. Malara, L.A. Dobrzański, C. Krawczyk: Effect of Influence of introducing silver nanoparticles on tribological characteristics of soft liner, Archives of Materials Science and Engineering, Vol. 62, 2013, Issue 1, pp. 5-14
301.    L.A. Dobrzański, W. Borek, M. Czaja, J. Mazurkiewicz: Structure of X11MnSiAl17-1-3 steel after hot-rolling and Gleeble simulations, Archives of Materials Science and Engineering, Vol. 61, 2013, Issue 1, pp. 13-21
302.    M. Król, L.A. Dobrzański, Ł. Reimann, I. Czaja: Surface quality in selective laser melting of metal powders, Archives of Materials Science and Engineering, Vol. 60, 2013, Issue 2, pp. 87-92
303.    L.A. Dobrzański, E. Jonda, W. Pakieła, M. Bilewicz: Improvement of wear resistance of the hot work tool steel by laser surface feeding with ceramic powder, Archives of Materials Science and Engineering, Vol. 60, 2013, Issue 2, pp. 64-71
304.    Ł. Reimann, L.A. Dobrzański: Influence of the casting temperature on dental Co-base alloys properties, Archives of Materials Science and Engineering, Vol. 60, 2013, Issue 1, pp. 5-12
305.    T. Tański, K. Labisz, L.A. Dobrzański, M. Wiśniowski, W. Matysiak: TEM microstructure investigations of aluminium alloys used as coating substrate, Archives of Materials Science and Engineering, Vol. 59, 2013, Issue 2, pp. 82-92
306.    L.A. Dobrzański, M. Bonek, K. Labisz: Effect of laser surface alloying on structure of a commercial tool steel, International Journal of Microstructure and Materials Properties, Vol. 8,  2013, No. 1-2, pp. 27-37
307.    D. Pakuła, M. Staszuk, L.A. Dobrzański: Investigations of the structure and properties of PVD coatings deposited onto sintered tool materials, Archives of Materials Science and Engineering, Vol. 58, 2012, Issue 2, pp. 219-226
308.    L.A. Dobrzański, M. Staszuk, R. Honysz: Application of artificial intelligence methods in PVD and CVD coatings properties modelling, Archives of Materials Science and Engineering, Vol. 58, 2012, Issue 2, pp. 152-157
309.    M. Dziekońska, A. Ziębowicz, B. Ziębowicz, L.A. Dobrzański: Corrosion resistance of neodymium composite materials reinforced with metal powders, Archives of Materials Science and Engineering, Vol. 58, 2012, Issue 2, pp. 137-145
310.    L.A. Dobrzański, W. Kwaśny, B. Dołżańska, A. Śliwa, K. Gołombek, G. Nowak: The computer simulation of internal stresses of tool gradient materials reinforced with the WC-Co, Archives of Materials Science and Engineering, Vol. 57, 2012, Issue 1, pp. 38-44
311.    L.A. Dobrzański, A.E. Tomiczek, A. Szewczyk, K. Piotrowski, M.U. Gutowska, J. Więckowski: Physical properties of magnetostrictive composite materials with the polyurethane matrix, Archives of Materials Science and Engineering, Vol. 57, 2012, Issue 1, pp. 21-27
312.    L.A. Dobrzański, Ł. Reimann, C. Krawczyk: Effect of age hardening on corrosion resistance and hardness of CoCrMo alloys used in dental engineering, Archives of Materials Science and Engineering, Vol. 57, 2012, Issue 1, pp. 5-12
313.    J. Konieczny, L.A. Dobrzański, A. Drygała, J. Lelątko: TEM investigations of laser texturized polycrystalline silicon solar cell, Archives of Materials Science and Engineering, Vol. 56, 2012, Issue 1, pp. 22-29
314.    L.A. Dobrzański, A. Kloc-Ptaszna, M. Pawlyta, W. Pakieła: Fabrication methods and heat treatment conditions effect on structure and properties of the gradient tool materials, Archives of Materials Science and Engineering, Vol. 56, 2012, Issue 1, pp. 5-21
315.    L.A. Dobrzański, E. Jonda, A. Klimpel, A. Lisiecki: The influence of laser re-melting and alloying on the structure and properties of the X40CrMov5-l steel surface layer, Welding International, Vol. 26, 2012, No. 6, pp. 411-415
316.    L.A. Dobrzański, E. Jonda, K. Labisz: Comparison of the abrasion wear resistance of the laser alloyed hot work tool steels, Archives of Materials Science and Engineering, Vol. 55, 2012, Issue 2, pp. 85-92
317.    L.A. Dobrzański, R. Honysz: Informative technologies in the material products designing, Archives of Materials Science and Engineering, Vol. 55, 2012, Issue 1, pp. 37-44
318.    L.A. Dobrzański, M. Kremzer, M. Dziekońska: Possibility of wettability improvement of Al2O3 preforms infiltrated by liquid aluminium alloy by deposition Ni-P coating, Archives of Materials Science and Engineering, Vol. 55, 2012, Issue 1, pp. 14-21
319.    M. Polok-Rubiniec, L.A. Dobrzański: Comparison of the CrN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrited steel, Archives of Materials Science and Engineering, Vol. 54, 2012, Issue 2, pp. 78-85
320.    K. Labisz, T. Tański, L.A. Dobrzański: HPDL laser alloying of heat treated Al-Si-Cu alloy, Archives of Materials Science and Engineering, Vol. 54, 2012, Issue 1, pp. 13-21
321.    L.A. Dobrzański, A. Tomiczek, G. Dziatkiewicz: FEM modelling of magnetostrictive composite materials, Archives of Materials Science and Engineering, Vol. 53, 2012, Issue 1, pp. 46-52
322.    L.A. Dobrzański, M. Bilewicz, J.C. Viana: Polymer nanocomposites reinforced with montmorillonite, Archives of Materials Science and Engineering, Vol. 53, 2012, Issue 1, pp. 5-28
323.    A.D. Dobrzańska-Danikiewicz, L.A. Dobrzański, J. Mazurkiewicz, B. Tomiczek, Ł. Reimann: E-transfer of materials surface engineering e-foresight results, Archives of Materials Science and Engineering, Vol. 52, 2011, Issue 2, pp. 87-100  & Open Access Library, Vol. 6, 2011, pp. 572-594
324.    B. Ziębowicz, M. Dziekońska, L.A. Dobrzański: Properties and structure of the functional composite materials - Nd-Fe-Co-B powder bonded with polymer, Archives of Materials Science and Engineering, Vol. 52, 2011, Issue 2, pp. 74-81
325.    K. Gołombek, G. Matula, J. Mikuła, L.A. Dobrzański: Influence of binder composition on the properties of feedstock for cemented carbides, Archives of Materials Science and Engineering, Vol. 51, 2011, Issue 2, pp. 116-124
326.    L.A. Dobrzański, A. Tomiczek, A Nabiałek, Z. Stokłosa: Magnetic properties of magnetostrictive Tb0.3Dy0.7Fe1.9 / polyurethane composite materials, Archives of Materials Science and Engineering, Vol. 51, 2011, Issue 2, pp. 97-102
327.    Z. Brytan, L.A. Dobrzański, W. Pakieła: Sintered stainless steel surface alloyed with Si3N4 powder, Archives of Materials Science and Engineering, Vol. 50, 2011, Issue 1, pp. 43-55
328.    L.A. Dobrzański, L.W. Żukowska: Gradient PVD coatings deposited on the sintered tool materials, Archives of Materials Science and Engineering, Vol. 48, 2011, Issue 2, pp. 103-111
329.    A. Łamacz, M. Pawlyta, L.A. Dobrzański, A. Krztoń: Characterization of the structure features of CeZrO2 and Ni/CeZrO2 catalysts for tar gasification with steam, Archives of Materials Science and Engineering, Vol. 48, 2011, Issue 2, pp. 89-96
330.    L.A. Dobrzański, B. Dołżańska, K. Gołombek, G. Matula: Characteristics of structure and properties of a sintered graded tool materials with cobalt matrix, Archives of Materials Science and Engineering, Vol. 47, 2011, Issue 2, pp. 69-76
331.    L.A. Dobrzański, A.J. Nowak, W. Błażejewski, R. Rybczyński: Non-standard test methods for long-fibrous reinforced composite materials, Archives of Materials Science and Engineering, Vol. 47, 2011, Issue 1, pp. 5-10
332.    D. Pakuła, L.A. Dobrzański, A. Križ, M. Staszuk: Investigation of PVD coatings deposited on the Si3N4 and sialon tool ceramics, Archives of Materials Science and Engineering, Vol. 46, 2010, Issue 1, pp. 53-60
333.    L.A. Dobrzański, R. Honysz: Artificial intelligence and virtual environment application for materials design methodology, Archives of Materials Science and Engineering, Vol. 45, 2010, Issue 2, pp. 69-94  & Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 4, pp. 201-212
334.    L.A. Dobrzański, A. Drygała, M. Giedroć: Application of crystalline silicon solar cells in photovoltaic modules, Archives of Materials Science and Engineering, Vol. 44, 2010, Issue 2, pp. 96-103
335.    L.A. Dobrzański, M. Bilewicz, J.C. Viana: Mechanical approach of PP/MMT polymer nanocomposite, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 2, pp. 94-100
336.    L.A. Dobrzański, B. Dołżańska: Hardness to toughness relationship on WC-Co tool gradient materials evaluated by Palmqvist method, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 2, pp. 87-93
337.    S. Rusz, L. Čížek, L.A. Dobrzański, S. Tylšar, J. Kedroň: ECAP methods application on selected non-ferrous metals and alloys, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 2, pp. 69-76
338.    L.A. Dobrzański, S. Malara, T. Tański, J. Konieczny: Effect of high power diode laser surface alloying on structure of MCMgAl12Zn1 alloy, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 1, pp. 54-61
339.    B. Krupińska, L.A. Dobrzański, Z.M. Rdzawski, K. Labisz: Cooling rate influence on microstructure of the Zn-Al cast alloy, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 1, pp. 13-20
340.    L.A. Dobrzański, M. Kremzer, W. Sitek: The application of statistical models in wear resistance simulations of Al-Al2O3 composites, Archives of Materials Science and Engineering, Vol. 43, 2010, Issue 1, pp. 5-12  & Archives of Computational Materials Science and Surface Engineering, Vol. 2, 2010, Issue 3, pp. 133-140
341.    L.A. Dobrzański, L.W. Żukowska, W. Kwaśny, J. Mikuła, K. Gołombek: Ti(C,N) and (Ti,Al)N hard wear resistant coatings, Archives of Materials Science and Engineering, Vol. 42, 2010, Issue 2, pp. 93-103
342.    L.A. Dobrzański, A. Pusz, A.J. Nowak, M. Górniak: Constructional model of internal oesophageal prosthesis, Archives of Materials Science and Engineering, Vol. 42, 2010, Issue 2, pp. 69-76
343.    A. Włodarczyk-Fligier, M. Adamiak, L.A. Dobrzański: Composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the BN ceramic particles, Archives of Materials Science and Engineering, Vol. 42, 2010, Issue 1, pp. 29-36
344.    L.A. Dobrzański, E. Jonda, K. Labisz: The influence of laser modification on the structure and properties of the X40CrMoV5-1 and 32CrMoV12-28 hot work tool steels, Archives of Materials Science and Engineering, Vol. 41, 2010, Issue 2, pp. 104-111
345.    J. Trzaska, A. Jagiełło, L.A. Dobrzański: The calculation of CCT diagrams for engineering steels, Archives of Materials Science and Engineering, Vol. 39, 2009, Issue 1, pp. 13-20
346.    M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak: Comparison of the PVD coatings, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 2, pp. 118-125
347.    L.A. Dobrzański, M. Musztyfaga, M. Actis Grande, M. Rosso: Computer aided determination of porosity in sintered steels, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 2, pp. 103-111
348.    J. Konieczny, K. Labisz, J. Wieczorek, L.A. Dobrzański: Stereometry specification of anodised and PVD coated surface of aluminium alloy, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 2, pp. 85-92
349.    L.A. Dobrzański, M. Staszuk, J. Konieczny, W. Kwaśny, M. Pawlyta: Structure of TiBN coatings deposited onto cemented carbides and sialon tool ceramics, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 1, pp. 48-54
350.    L.A. Dobrzański, A. Drygała, P. Panek, M. Lipiński, P. Zięba: Development of the laser method of multicrystalline silicon surface texturization, Archives of Materials Science and Engineering, Vol. 38, 2009, Issue 1, pp. 5-11
351.    L.A. Dobrzański, A. Grajcar, W. Borek: Microstructure evolution of high-manganese steel during the thermomechanical processing, Archives of Materials Science and Engineering Vol. 37, 2009, Issue 2, pp. 69-76
352.    L.A. Dobrzański, E. Jonda, A. Klimpel, Laser surface treatment of the hot work tool steel alloyed with TaC and VC carbide powders, Archives of Materials Science and Engineering, Vol. 37, Issue 1, 2009, pp. 53-60
353.    L.A. Dobrzański, K. Lukaszkowicz, K. Labisz: Structure, texture and chemical composition of coatings deposited by PVD techniques, Archives of Materials Science and Engineering, Vol. 37, 2009, Issue 1, pp. 45-52
354.    B. Krupińska, D. Szewieczek, L.A. Dobrzański: Computer-aided optimisation of technological process, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 2, pp. 96-102
355.    L.A. Dobrzański, L.W. Żukowska, J. Mikuła, K. Gołombek, T. Gawarecki: Hard gradient (Ti,Al,Si)N coating deposited on composite tool materials, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 2, pp. 69-75
356.    L.A. Dobrzański, T. Tański, L. Čížek, J. Madejski: The influence of the heat treatment on the microstructure and properties of Mg-Al-Zn based alloys, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 1, pp. 48-54
357.    I. Schindler, M. Janošec, E. Místecký, M. Růžička, L. Čížek, L.A. Dobrzański, S. Rusz, P. Suchánek: Effect of cold rolling and annealing on mechanical properties of HSLA steel, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 1, pp. 41-47
358.    L.A. Dobrzański, M. Kremzer, A.J. Nowak, A. Nagel: Aluminium matrix composites fabricated by infiltration method, Archives of Materials Science and Engineering, Vol. 36, 2009, Issue 1, pp. 5-11
359.    M. Rosso, L.A. Dobrzański, J. Otręba, M. Actis Grande: Mechanical properties and micro­structural characteristic of sinter-hardened steels, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 2, pp. 117-124
360.    L.A. Dobrzański, J. Domagała, T. Tański. A. Klimpel, D. Janicki: Laser surface treatment of cast magnesium alloys, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 2, pp. 101-106
361.    L.A. Dobrzański, S. Malara, J. Domagała, T. Tański, K. Gołombek: Influence of the laser modification of surface on properties and structure of magnesium alloys, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 2, pp. 95-100
362.    L.A. Dobrzański, J. Domagała, S. Malara, T. Tański, W. Kwaśny: Structure changes and mechanical properties of laser alloyed magnesium cast alloys, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 2, pp.77-82
363.    L.A. Dobrzański, S. Malara, T. Tański, A. Klimpel, D. Janicki: Laser surface treatment of magnesium alloys with silicon carbide powder, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 1, pp. 54-60
364.    L.A. Dobrzański, A. Wydrzyńska, O. Iesenchuk: Intelligent epoxy matrix composite materials consisting of Tb0.3Dy0.7Fe1.9 magnetostrictive particulates, Archives of Materials Science and Engineering, Vol. 35, 2009, Issue 1, pp. 33-38
365.    L.A. Dobrzański, M. Król, T. Tański, R. Maniara: Thermal analysis of the MCMgAl9Zn1 magnesium alloy, Archives of Materials Science and Engineering, Vol. 34, 2008, Issue 2, pp. 113-116
366.    L.A. Dobrzański, J. Domagała, T. Tański, A. Klimpel, D. Janicki: Characteristic of Mg-Al-Zn alloys after laser treat-ment, Archives of Materials Science and Engineering, Vol. 34, 2008, Issue 2, pp. 69-74
367.    L.A. Dobrzański, F. Brom: Blended learning in teaching materials science subjects at full time studies, Archives of Materials Science and Engineering, Vol. 34, 2008, Issue 1, pp. 57-60
368.    J. Konieczny, K. Labisz, J. Wieczorek, L.A. Dobrzański: Stereometry specification and properties of anodization surface of casting aluminium alloys, Archives of Materials Science and Engineering, Vol. 33, 2008, Issue 1, pp. 13-20
369.    L.A. Dobrzański, R. Honysz: The significance of multimedia didactic aids in the informative society, Archives of Materials Science and Engineering, Vol. 32, 2008, Issue 2, pp. 117-120
370.    L.A. Dobrzański, L.W. Żukowska, J. Kubacki, K. Gołombek, J. Mikuła: XPS and AES analysis of PVD coatings, Archives of Materials Science and Engineering, Vol. 32, 2008, Issue 2, pp. 99-102
371.    J. Mikuła, G. Matula, K. Gołombek, L.A. Dobrzański: Sintered composite gradient tool materials, Archives of Materials Science and Engineering, Vol. 32, 2008, Issue 1, pp. 25-28
372.    L.A. Dobrzański, Ł. Reimann, G. Krawczyk: Influence of the ageing on mechanical properties of the aluminium alloy AlSi9Mg, Archives of Materials Science and Engineering, Vol. 31, 2008, Issue 1, pp. 37-40
373.    L.A. Dobrzański, A. Kloc-Ptaszna, G. Matula: Gradient tool WC/HS6-5-2 materials produced using the powder metallurgy method, Archives of Materials Science and Engineering, Vol. 31, 2008, Issue 1, pp. 9-12
374.    L.A. Dobrzański, J. Domagała, T. Tański, A. Klimpel, D. Janicki: Laser surface treatment of magnesium alloy with WC powder, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 2, pp. 113-116
375.    J. Konieczny, L.A. Dobrzański, B. Tomiczek, J. Trzaska: Application of the artificial neural networks for prediction of magnetic saturation of metallic amorphous alloys, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 2, pp. 105-108
376.    Ziębowicz, L.A. Dobrzański, M. Drak, A. Wydrzyńska: Corrosion resistance of composite materials Fe73.5Cu1Nb3Si13.5B9 – PE type in acid environment, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 2, pp. 89-92
377.    M. Bilewicz, J.C. Viana, L.A. Dobrzański: Polymer composite strengthening by developed injection moulding technique, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 2, pp. 69-72
378.    L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Innovative PM duplex stainless steels obtained basing on the Schaeffler diagram, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 1, pp. 49-52
379.    L.A. Dobrzański, M. Kremzer, J. Trzaska, A. Włodarczyk-Fligier: Neural network application in simulations of composites Al-Al2O3 tribological properties, Archives of Materials Science and Engineering, Vol. 30, 2008, Issue 1, pp. 37-40
380.    L.A. Dobrzański, K. Labisz, M. Piec, A. Klimpel: Mechanical properties of the surface layer of the laser alloyed 32CrMoV12-28 steel, Archives of Materials Science and Engineering, Vol. 29, 2008, Issue 1, pp. 57-60
381.    B. Krupińska, D. Szewieczek, L.A. Dobrzański: Improvement of technological processes by the use of technological efficiency analysis, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 12, pp. 751-756
382.    M. Greger, R. Kocich, L. Čížek, L.A. Dobrzański, M. Widomská: Influence of ECAP technology on the metal structures and properties, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 12, pp. 709-716
383.    L.A. Dobrzański, R. Honysz: Building methodology of virtual laboratory posts for materials science virtual labo-ratory purposes, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 11, pp. 695-700
384.    L.A. Dobrzański, F. Brom, Z. Brytan: Teaching of material science matters using e-learning techniques, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 11, pp. 691-694
385.    L.A. Dobrzański, L.W. Żukowska: Properties of the multicomponent and gradient PVD coatings, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 10, pp. 621-624
386.    L.A. Dobrzański, B. Dołżańska, G. Matula: Influence of carbide (W, Ti)C on the structure and properties of tool gradient materials, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 10, pp. 617-620
387.    L.A. Dobrzański, M. Kremzer, A. Nagel: Aluminium EN AC-AlSi12 alloy matrix composite materials reinforced by Al2O3 porous preforms, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 10, pp. 593-596
388.    L.A. Dobrzański, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Structure of the gradient carbide steels of HS6-5-2 high-speed steel matrix, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 10, pp. 589-592
389.    L.A. Dobrzański, K. Lukaszkowicz: Mechanical properties of monolayer coatings deposited by PVD techniques, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 9, pp. 549-556
390.    I. Schindler, L. Čížek, L.A. Dobrzański, P. Kozelský, S. Rusz, T. Kubina, P. Suchánek, M. Marek, J. Bořuta, L. Černý, V. Švinc: Deformation behaviour and microstructure development of a high-carbon steel during its hot and cold processing, International Journal of Microstructure and Materials Properties, Vol. 2, 2007, No. 2, pp. 224-237
391.    L.A. Dobrzański, A. Włodarczyk-Fligier, M. Adamiak: Properties and corrosion resistance of PM composite materials based on EN AW-Al Cu4Mg1(A) aluminium alloy reinforced with Ti(C,N) particles, International Journal of Microstructure and Materials Properties, Vol. 2, 2007, No. 2, pp. 150-163
392.    L.A. Dobrzański, Drak M.: Permanent magnets Nd-Fe-B, International Journal of Microstructure and Materials Pro-perties, Vol. 2, 2007, No. 2, pp. 133-149
393.    L.A. Dobrzański, E. Jonda, A. Križ, K. Lukaszkowicz: Mechanical and tribological properties of the surface layer of the hot work tool steel obtained by laser alloying, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 7, pp. 389-396
394.    L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Properties of duplex stainless steels made by powder metallurgy, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 4, pp. 217-223
395.    L.A. Dobrzański, A. Kloc-Ptaszna, G. Matula, J.M. Torralba: Structure and properties of the gradient tool materials of unalloyed steel matrix reinforced with HS6-5-2 high-speed steel, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 4, pp. 197-202
396.    J. Konieczny, L.A. Dobrzański, J.E. Frąckowiak: Structure and magnetic properties of powder HITPERM material, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 3, pp. 156-164
397.    L.A. Dobrzański, J. Domagała, J.F. Silva: Application of Taguchi method in the optimisation of filament winding of thermoplastic composites, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 3, pp. 133-140
398.    L.A. Dobrzański, R. Maniara, J.H. Sokolowski: The effect of cooling rate on microstructure and mechanical properties of AC AlSi9Cu alloy, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 2, pp. 105-112
399.    M. Greger, R. Kocich, L. Čížek, L.A. Dobrzański, I. Juřička: Possibilities of mechanical properties and microstructure improvement of magnesium alloys, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 2, pp. 83-90
400.    L.A. Dobrzański, J. Otręba, M. Actis Grande, M. Rosso: Sintering of Ni-Mo-W steels and their properties, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 2, pp. 77-82
401.    L.A. Dobrzański, K. Lukaszkowicz, D. Pakuła, J. Mikuła: Corrosion resistance of multilayer and gradient coatings deposited by PVD and CVD techniques, Archives of Materials Science and Engineering, Vol. 28, 2007, Issue 1, pp. 12-18 (także w DOAJ)
402.    J. Konieczny, L.A. Dobrzański, B. Tomiczek: Employment of the artificial neural networks for prediction of magnetic properties of the metallic amorphous alloys, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 6, pp. 650-662
403.    L.A. Dobrzański, T. Tański, J. Trzaska: Modeling of the optimum heat treatment conditions of Mg-Al-Zn magnesium cast alloys, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 5, pp. 540-554
404.    L.A. Dobrzański, A. Polok, P. Zarychta, E. Jonda, M. Piec, K. Labisz: Modelling of properties of the alloy tool steels after laser surface treatment, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 5, pp. 526-539
405.    L.A. Dobrzański, Z. Brytan, M. Actis Grande, M. Rosso: Computer aided materials design of PM duplex stainless steels, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 4, pp. 465-478
406.    J. Trzaska, W. Sitek, L.A. Dobrzański: Application of neural networks for selection of steel grade with required hardenability, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 3, pp. 366-382
407.    D. Szewieczek, L.A. Dobrzański, B. Krupińska, M. Krupiński: The optimization of technological processes on basis of technological efficiency analysis, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 2, pp. 289-302
408.    L.A. Dobrzański, R. Maniara, J. Sokolowski, W. Kasprzak: Applications of artificial intelligence methods for modelling of solidus temperature for hypoeutectic Al-Si-Cu alloys, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 2, pp. 214-225
409.    W. Kwaśny, M.J. Woźniak, J. Mikuła, L.A. Dobrzański: Structure, physical properties and multifractal characteristics of the PVD and CVD coatings deposition onto the Al2O3+TiC ceramics, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 1, pp. 97-113
410.    L.A. Dobrzański, A. Śliwa, W. Sitek, W. Kwaśny: The computer simulation of critical compressive stresses on the PVD coatings, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 1, pp. 28-39
411.    L.A. Dobrzański, M. Krupiński, J. Sokolowski, P. Zarychta: The use of neural networks for the classification of casting defect, International Journal of Computational Materials Science and Surface Engineering, Vol. 1, 2007, No. 1, pp. 18-27
412.    L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel: Effect of Diode Laser Surface Alloying of Hot-Work Tool Steel, Metallurgia Italiana, Vol. 98, 2006, Issue 4, pp. 41-46
413.    L.A. Dobrzański, K. Gołombek: Characterisation of the Gradient Coatings TiN/(Ti,Al,Si)N/TiN Type Deposited on Sintered Tool Materials, Metallurgia Italiana, Vol. 98, 2006, Issue 4, pp. 29-34
414.    L.A. Dobrzański, K. Gołombek: Structure and Properties of Selected Cemented Carbides and Cermets Covered with TiN/(Ti,Al,Si)N/TiN Coatings Obtained by the Cathodic Arc Evaporation Process, Materials Research, Vol. 8, 2005, No 2, pp. 113-116
415.    L.A. Dobrzański, W. Kasprzak, M. Adamiak, M. Soković, J. Kopač, G. D’Errico: The Influence of Chemical Composition of High-Speed Steels on the Wear during Cutting and Erosion Tests, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 25, 2003, No 2, pp. 194-200
416.    L.A. Dobrzański, W. Sitek: Application of Neural Networks in Steels’ Chemical Composition Design, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 25, 2003, No. 2, pp. 185-188